A Microstructural Study of Grain Boundary Engineered Alloy 800H
Source abstract
Abstract
A series of grain boundary engineering (GBE) procedures was performed on samples of 800H, a common iron-nickel base alloy. The effects of varying the GBE parameters (deformation percentage and annealing temperature/time) were examined using electron backscatter diffraction orientation mapping. GBE samples exhibited up to a 70 pct increase in Σ3 n boundary length fraction compared to the as-received condition. The incorporation of these Σ3 n boundaries was also measured using a simplified model of two-dimensional grain boundary transport and its electrical analogy. The results showed that GBE resulted in increased resistance to grain boundary diffusion compared to the as-received condition. The evolution of a GBE microstructure was also studied on a per-cycle basis, and the results are shown to be consistent with previous studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. T. Watanabe: Res. Mech., 1984, vol. 11, pp. 47–84.
2. V. Randle: Mater. Sci. Technol., 2010, vol. 26, pp. 253–61.10.1179/026708309X12601952777747 ↗
3. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scripta Metall. Mater., 1995, vol. 33, pp. 1387–92.10.1016/0956-716X(95)00420-Z ↗
4. E.M. Lehockey, A.M. Brennenstuhl, and I. Thompson: Corros. Sci., 2004, vol. 46, pp. 2383–2404.10.1016/j.corsci.2004.01.019 ↗
5. V. Thaveeprungsriporn and G.S. Was: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2101–12.10.1007/s11661-997-0167-6 ↗
6. T. Watanabe and S. Tsurekawa: Acta Mater., 1999, vol. 47, pp. 4171–85.10.1016/S1359-6454(99)00275-X ↗
7. E.M. Lehockey, G. Palumbo, and P. Lin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3069–79.10.1007/s11661-998-0214-y ↗
8. S.M. Schlegel, S. Hopkins, and M. Frary: Scripta Mater., 2009, vol. 61, pp. 88–91.10.1016/j.scriptamat.2009.03.013 ↗
9. L.S. Shvindlerman and B.B. Straumal: Acta Metall., 1985, vol. 33, pp. 1735–49.10.1016/0001-6160(85)90168-3 ↗
10. V. Randle: Mater. Sci. Technol., 1999, vol. 15, pp. 246–52.10.1179/026708399101505806 ↗
11. V. Randle: Scripta Mater., 2001, vol. 44, pp. 2789–94.10.1016/S1359-6462(01)00975-7 ↗
12. M. Kumar, W.E. King, and A.J. Schwartz: Acta Mater., 2000, vol. 48, pp. 2081–91.10.1016/S1359-6454(00)00045-8 ↗
13. V. Randle: Acta Mater., 1997, vol. 46, pp. 1459–80.10.1016/S1359-6454(97)00338-8 ↗
14. K.L. Merkle and D. Wolf: Philos. Mag. A, 1992, vol. 65, pp. 513–30.10.1080/01418619208201536 ↗
15. G.S. Rohrer, D.M. Saylor, B.S. El-Dasher, B.L. Adams, A.D. Rollett, and P. Wynblatt: Z. Metallkd., 2004, vol. 95, pp. 197–214.10.3139/146.017934 ↗
16. T. Skidmore, R.G. Bucheit, and M.C. Juhas: Scripta Mater., 2004, vol. 50, pp. 873–77.10.1016/j.scriptamat.2003.12.004 ↗
17. X. Fang, W. Wang, H. Guo, X. Zhang, and B. Zhou: J. Iron Steel Res. Int., 2007, vol. 14 (5), pp. 339–43.10.1016/S1006-706X(08)60107-7 ↗
18. M. Coleman and V. Randle: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2175–83.10.1007/s11661-008-9574-6 ↗
19. C.A. Schuh, M. Kumar, and W.E. King: Acta Mater., 2003, vol. 51, pp. 687–700.10.1016/S1359-6454(02)00447-0 ↗
20. Y. Gao, J.S. Stölken, M. Kumar, and R.O. Ritchie: Acta Mater., 2007, vol. 55, pp. 3155–67.10.1016/j.actamat.2007.01.033 ↗
21. Y. Chen and C.A. Schuh: Acta Mater., 2006, vol. 54, pp. 4709–20.10.1016/j.actamat.2006.06.011 ↗
22. B. Alexandreanu, B.H. Sencer, V. Thaveeprungsriporn, and G.S. Was: Acta Mater., 2003, vol. 51, pp. 3831–48.10.1016/S1359-6454(03)00207-6 ↗
23. Special Metals Technical Bulletin SMC-047—“Incoloy 800H and 800HT,” available at www.specialmetals.com.
24. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
25. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304, pp. 422–26.10.1126/science.1092905 ↗
26. V. Randle: The Measurement of Grain Boundary Geometry, IOP Publishing Ltd., Bristol, UK, 1993.
27. V. Thaveeprunsriporn, P. Sinsrok, and D. Thong-Aram: Scripta Mater., 2001, vol. 44, pp. 67–71.10.1016/S1359-6462(00)00582-0 ↗
28. U. Krupp, W.M. Kane, X. Liu, O. Dueber, C. Laird, and C.J. McMahon: Mater. Sci. Eng. A, 2003, vol. 349, pp. 213–17.10.1016/S0921-5093(02)00753-0 ↗
29. H. Kokawa, M. Shimada, M. Michiuchi, Z.J. Wang, and Y.S. Sato: Acta Mater., 2007, vol. 55, pp. 5401–07.10.1016/j.actamat.2007.06.005 ↗
30. W.E. King and A.J. Schwartz: Scripta Mater., 1998, vol. 38, pp. 449–55.10.1016/S1359-6462(97)00486-7 ↗
31. V. Randle and H. Davies: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1853–57.10.1007/s11661-002-0193-3 ↗
32. G. Owen and V. Randle: Scripta Mater., 2006, vol. 55, pp. 959–62.10.1016/j.scriptamat.2006.04.049 ↗
33. J. Furley and V. Randle: J. Mater. Sci. Technol., 1991, vol. 7, pp. 12–19.10.1179/mst.1991.7.1.12 ↗
34. L. Tan and T.R. Allen: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1921–25.10.1007/s11661-005-0055-x ↗
35. C.J. Boehlert: Mater. Sci. Eng. A, 2008, vol. 473, pp. 233–37.10.1016/j.msea.2007.03.082 ↗
36. W.S. Tong, J.M. Rickman, H.M. Chan, and M.P. Harmer: J. Mater. Res., 2002, vol. 17, pp. 348–52.10.1557/JMR.2002.0049 ↗
37. Y. Chen and C.A. Schuh: Phys. Rev. B, 2007, vol. 76 (6), article no. 064111, pp. 1–12.10.1103/PhysRevB.76.064111 ↗