Microstructural Characterization, Mechanical Properties and Thermal Stability of Friction Surfaced Inconel 718 Coatings
Source abstract
Abstract
In the present work, coatings of Inconel 718 were deposited on a self-mating substrate by friction surfacing process. The bonding between the coating and the substrate was sound. The microstructure in the coating volume was analysed in detail through electron back-scattered diffraction. The coating microstructure contained fine grains (1–2 μm) and majority (> 74 pct) of boundaries had high angle character. The fine grains were formed by discontinuous dynamic recrystallization process. Local occurrence of continuous dynamic recrystallization was also observed in the microstructure. The microstructure was heterogeneous across the coating width. On the retreating side, the grain size distribution was wide and the grains had higher retained deformation (strain) inside them. There was variation in the fraction of twin boundaries across the coating width. The difference in the microstructural features is attributed to the variation in strain rate and temperature across the coating width during friction surfacing. A temperature variation of 50 °C was recorded across the coating width through infrared camera. The coating hardness was significantly higher than that of the substrate. The coating microstructure was stable against the double ageing treatment, which was carried out to generate the strengthening precipitates, post friction surfacing. The coating hardness further improved on the double ageing treatment. Annealing at 800 °C for 1 hour did not change the grain size in the coating, however, the hardness dropped. This was possibly due to over-ageing/dissolution of the strengthening precipitates. A further decrease in hardness and grain growth was observed in the coating when annealed at 900 °C and 1000 °C for 1 hour.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. J. Gandra, H. Krohn, R.M. Miranda, P. Vilaca, L. Vilaca, L. Quintino, and J.F. dos Santos: J. Mater. Proc. Technol., 2014, vol. 214, pp. 1062–93.10.1016/j.jmatprotec.2013.12.008 ↗
2. J. Gandra, R.M. Miranda, and P. Vilaça: J. Mater. Proc. Technol., 2012, vol. 212, pp. 1676–86.10.1016/j.jmatprotec.2012.03.013 ↗
3. V.I. Vitanov, I.I. Voutchkov, and G.M. Bedford: J. Mater. Proc. Technol., 2000, vol. 107, pp. 236–42.10.1016/S0924-0136(00)00710-X ↗
4. H. Sakihama, H. Tokisue, and K. Katoh: Mater. Trans., 2003, vol. 44, pp. 2688–94.10.2320/matertrans.44.2688 ↗
5. J.C. Galvis, P.H.F. Oliveira, M.F. Hupalo, J.P. Martins, and A.L.M. Carvalldo: J. Mater. Proc. Technol., 2017, vol. 245, pp. 91–105.10.1016/j.jmatprotec.2017.02.016 ↗
6. H.K. Rafi, G.D.J. Ram, G. Phanikumar, and K.P. Rao: Mater. Des., 2011, vol. 32, pp. 82–7.10.1016/j.matdes.2010.06.031 ↗
7. K.P. Rao, R. Damodaram, H.K. Rafi, G.D.J. Ram, G.M. Reddy, and R. Nagalakshmi: Mater. Charact., 2012, vol. 70, pp. 111–16.10.1016/j.matchar.2012.05.008 ↗
8. D. Govardhan, A.C.S. Kumar, K.G.K. Murti, and G.M. Reddy: Mater. Des., 2012, vol. 36, pp. 206–14.10.1016/j.matdes.2011.07.040 ↗
9. R. Puli and G.D.J. Ram: Surf. Coat. Technol., 2012, vol. 209, pp. 1–7.10.1016/j.surfcoat.2012.06.075 ↗
10. J.J.S. Dilip and G.D.J. Ram: Mater. Charact., 2013, vol. 86, pp. 146–51.10.1016/j.matchar.2013.10.009 ↗
11. V. Fitseva, H. Krohn, S. Hanke, and J.F. dos Santos: Surf. Coat. Technol., 2015, vol. 278, pp. 56–63.10.1016/j.surfcoat.2015.07.039 ↗
12. R. Puli and G.D.J. Ram: Surf. Coat. Technol., 2012, vol. 207, pp. 310–8.10.1016/j.surfcoat.2012.07.001 ↗
13. D. Guo, C.T. Kwok, and S.L.I. Chan: Surf. Coat. Technol., 2018, vol. 350, pp. 936–48.10.1016/j.surfcoat.2018.03.065 ↗
14. S. Hanke, A. Fischer, M. Beyer, and J. dos Santos: Wear, 2011, vol. 273, pp. 32–7.10.1016/j.wear.2011.06.002 ↗
15. S. Hanke, L. Sena, R.S. Coelho, and J. dos Santos: Mater. Manuf. Process., 2018, vol. 33(3), pp. 270–6.10.1080/10426914.2017.1291947 ↗
16. D. Nakama, K. Katoh, and H. Tokisue: Mater. Trans., 2008, vol. 49, pp. 1137–41.10.2320/matertrans.MC200779 ↗
17. M. Chandrasekaran, A.W. Batchelor, and S. Jana: J. Mater. Sci., 1998, vol. 33, pp. 2709–17.10.1023/A:1004338210262 ↗
18. G.M. Bedford, V.I. Vitanov, and I.I. Voutchkov: Surf. Coat. Technol., 2001, vol. 141, pp. 34–9.10.1016/S0257-8972(01)01129-X ↗
19. G.M. Reddy, K.S. Rao, and T. Mohandas: Surf. Eng., 2009, vol. 25, pp. 25–30.10.1179/174329408X298238 ↗
20. A.W. Batchelor, S. Jana, C.P. Koh, and C.S. Tan: J. Mater. Proc. Technol., 1996, vol. 57, pp. 172–81.10.1016/0924-0136(95)02057-8 ↗
21. R. Damodaram, P. Rai, S.C.J. Daniel, R. Bauri, and D. Yadav: Surf. Coat. Technol., 2021, vol. 422, p. 127482.10.1016/j.surfcoat.2021.127482 ↗
22. X.M. Liu, Z.D. Zou, Y.H. Zhang, S.Y. Qu, and X.H. Wang: Surf. Coat. Technol., 2008, vol. 202, pp. 1889–94.10.1016/j.surfcoat.2007.08.024 ↗
23. R. Puli and G.D.J. Ram: Mater. Charact., 2012, vol. 74, pp. 49–54.10.1016/j.matchar.2012.09.001 ↗
24. R. Damodaram, S.G.S. Raman, and K.P. Rao: Mater. Sci. Eng. A, 2013, vol. 560, pp. 781–6.10.1016/j.msea.2012.10.035 ↗
25. C. Mary and M. Jahazi: Adv. Mater. Res., 2007, vol. 15–17, pp. 357–62.
26. J. Cormier, P. Gadaud, M. Czaplicki, R.Y. Zhang, H.B. Dong, T.M. Smith, F. Zhang, J.S. Tiley, and S.L. Semiatin: Metall. Mater. Trans. A, 2021, vol. 52, pp. 500–11.10.1007/s11661-020-06078-4 ↗
27. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, 2nd ed. ASM International, Materials Park, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
28. D.F. Paulonis and J.J. Schirra: in Alloy 718 at Pratt & Whitney- Historical perspective and future challenges, Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, TMS, The Minerals, Metals & Materials Society, Warrendale, PA, 2001, pp. 13–23.10.7449/2001/Superalloys_2001_13_23 ↗
29. S.C.J. Daniel, R. Damodaram, G.M. Karthik, and B.L. Rao: J. Mater. Eng. Perform., 2022, vol. 31, pp. 4119–32.10.1007/s11665-021-06488-4 ↗
30. H.K. Rafi, G.D.J. Ram, G. Phanikumar, and K.P. Rao: Surf. Coat. Technol., 2010, vol. 205, pp. 232–42.10.1016/j.surfcoat.2010.06.052 ↗
31. H. Monajati, M. Zoghlami, A. Tongne, and M. Jahazi: Metals, 2020, vol. 10, p. 1244.10.3390/met10091244 ↗
32. R.C. Buckingham, C. Argyrakis, M.C. Hardy, and S. Birosca: Mater. Sci. Eng. A, 2016, vol. 654, pp. 317–28.10.1016/j.msea.2015.12.042 ↗
33. A.K. Prajapati, D. Yadav, C.S. Perugu, and S.V. Kailas: Mater. Des., 2017, vol. 113, pp. 99–108.10.1016/j.matdes.2016.09.101 ↗
34. H.K. Rafi, K. Balasubramaniam, G. Phanikumar, and K.P. Rao: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3425–29.10.1007/s11661-011-0750-8 ↗
35. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
36. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980–103.10.1016/j.pmatsci.2008.05.001 ↗
37. Z. Rahmati, H.J. Aval, S. Nourouzi, and R. Jamaati: Mater. Res. Express, 2019, vol. 6, p. 035003.10.1088/2053-1591/ab255a ↗
38. C.I. Chang, C.J. Lee, and J.C. Huang: Scr. Mater., 2004, vol. 51, pp. 509–14.10.1016/j.scriptamat.2004.05.043 ↗
39. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed. Pergamon, Elsevier, New York, 2004, pp. 427–33.
40. Y. Wang, W.Z. Shao, L. Zhen, L. Yang, and X.M. Zhang: Mater. Sci. Eng. A, 2008, vol. 497, pp. 479–86.10.1016/j.msea.2008.07.046 ↗
41. S.C. Medeiros, Y.V.R.K. Prasad, W.G. Frazier, and R. Srinivasan: Mater. Sci. Eng. A, 2000, vol. 293, pp. 198–207.10.1016/S0921-5093(00)01053-4 ↗
42. C. Gupta, J.S. Jha, B. Jayabalan, R. Gujrati, A. Alankar, and S. Mishra: Metall. Mater. Trans. A, 2019, vol. 50, pp. 4714–31.10.1007/s11661-019-05380-0 ↗
43. F.-L. Sui, L.-X. Xu, L.-Q. Chen, and X.-H. Liu: J. Mater. Proc. Technol., 2011, vol. 211, pp. 433–40.10.1016/j.jmatprotec.2010.10.015 ↗
44. D. Jia, W. Sun, D. Xu, L. Yu, X. Xin, W. Zhang, and F. Qi: J. Alloys Compd., 2019, vol. 787, pp. 196–205.10.1016/j.jallcom.2019.02.055 ↗
45. A. Iturbe, E. Giraud, E. Hormaetxe, A. Garay, G. Germain, K. Ostolaza, and P.J. Arrazola: Mater. Sci. Eng. A, 2017, vol. 682, pp. 441–53.10.1016/j.msea.2016.11.054 ↗
46. M.A. Moretti, B. Dalai, P. Åkerström, C. Arvieu, D. Jacquin, E. Lacoste, and L.-E. Lindgren: Metall. Mater. Trans. A, 2021, vol. 52, pp. 5243–57.10.1007/s11661-021-06463-7 ↗
47. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–64.10.1016/0001-6160(88)90139-3 ↗
48. Y. Wang, W.Z. Shao, L. Zhen, and X.M. Zhang: Mater. Sci. Eng. A, 2008, vol. 486, pp. 321–32.10.1016/j.msea.2007.09.008 ↗
49. L. Rémy and A. Pineau: Mater. Sci. Eng. A, 1978, vol. 36, pp. 47–63.10.1016/0025-5416(78)90194-5 ↗
50. S. Tian, X. Zhu, J. Wu, H. Yu, D. Shu, and B. Qian: J. Mater. Sci. Technol., 2016, vol. 32, pp. 790–8.10.1016/j.jmst.2016.01.020 ↗
51. D. Yadav and R. Bauri: Mater. Sci. Eng. A, 2012, vol. 539, pp. 85–92.10.1016/j.msea.2012.01.055 ↗
52. S. Mahajan, C. Pande, M. Imam, and B. Rath: Acta Mater., 1997, vol. 45, pp. 2633–38.10.1016/S1359-6454(96)00336-9 ↗
53. J. Lambarri, J. Leunda, V.G. Navas, C. Soriano, and C. Sanz: Opt. Laser Eng., 2013, vol. 51, pp. 813–21.10.1016/j.optlaseng.2013.01.011 ↗
54. S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G.A. Rao, and U. Borah: J. Alloys Compd., 2016, vol. 681, pp. 28–42.10.1016/j.jallcom.2016.04.185 ↗