Nucleation Sites in the Static Recrystallization of a Hot-Deformed Ni-30 Pct Fe Austenite Model Alloy
Source abstract
Abstract
Abstract In the present study, the nucleation of static recrystallization (SRX) in austenite after hot deformation is experimentally analyzed using a Ni-30 pct Fe model alloy. In agreement with the predictions by current models, nucleation rate exhibits a strong peak, early during SRX. Whereas such an early peak is explained by current models by the saturation of nucleation sites, this condition is far from reached, even after the peak declines. In addition, triple-junction and grain-boundary sites are shown to make a quantitatively similar contribution to nucleation. However, for a given boundary between deformed grains, nucleation predominantly starts at one of the triple junctions. Triple-junction nucleation initiates by strain-induced boundary migration of the nucleus (bulging) along one of the boundaries at the junction. Annealing twin boundaries contribute negligibly to nucleation through their grain-boundary sites. By contrast, their junctions with the boundaries of the parent grains do play a relevant role. The earlier nucleation at the triple junctions is attributed to the higher dislocation density observed around them, and the energy of the boundary consumed by the bulge. Both the maximum and average number of nuclei formed per boundary between deformed grains increase with increasing boundary length.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A. Rollett, G.S. Rohrer, and J. Humphreys: Recrystallization and Related Annealing Phenomena, 3rd ed. Elsevier Health Sciences, London, 2017
2. H. Landheer, S.E. Offerman, R.H. Petrov, and L.A.I. Kestens: Acta Mater., 2009, vol. 57, pp. 1486–9610.1016/j.actamat.2008.11.034 ↗
3. A. Laasraoui and J.J. Jonas: Metall. Trans. A, 1991, vol. 22, pp. 151–6010.1007/BF03350957 ↗
4. S. Sarkar, A. Moreau, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2008, vol. 39, pp. 897–90710.1007/s11661-007-9461-6 ↗
5. Z. Aretxabaleta, B. Pereda, and B. López: Metall. Mater. Trans. A, 2014, vol. 45, pp. 934–4710.1007/s11661-013-2014-2 ↗
6. S.-H. Cho, K.-B. Kang, and J.J. Jonas: ISIJ Int., 2001, vol. 41, pp. 63–6910.2355/isijinternational.41.63 ↗
7. H. Beladi, P. Cizek, A.S. Taylor, G.S. Rohrer, and P.D. Hodgson: Metall. Mater. Trans. A., 2017, vol. 48, pp. 855–6710.1007/s11661-016-3880-1 ↗
8. M. Kubota, K. Ushioda, G. Miyamoto, and T. Furuhara: Scripta Mater., 2016, vol. 112, pp. 92–95.10.1016/j.scriptamat.2015.09.020 ↗
9. M.P. Butrón-Guillén, J.J. Jonas, and R.K. Ray: Acta Metall. Mater., 1994, vol. 42, pp. 3615–2710.1016/0956-7151(94)90428-6 ↗
10. N. Bernier, L. Bracke, L. Malet, and S. Godet: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5937–5510.1007/s11661-014-2553-1 ↗
11. B. Gardiola, M. Humbert, C. Esling, G. Flemming, and K.E. Hensger: Mater. Sci. Eng. A, 2001, vol. 303, pp. 60–6910.1016/S0921-5093(00)01887-6 ↗
12. Y. Lin, Y.-X. Liu, M.-S. Chen, M.-H. Huang, X. Ma, and Z.-L. Long: Mater. Des., 2016, vol. 99, pp. 107–1410.1016/j.matdes.2016.03.050 ↗
13. J.W.C. Dunlop, Y.J.M. Bréchet, L. Legras, and H.S. Zurob: J. Nucl. Mater., 2007, vol. 366, pp. 178–8610.1016/j.jnucmat.2006.12.074 ↗
14. H.S. Zurob, Y.J.M. Brechet, and J.W.C. Dunlop: Acta Mater., 2006, vol. 54, pp. 3983–9010.1016/j.actamat.2006.04.028 ↗
15. M.D. Rehman and H.S. Zurob: Metall. Mater. Trans. A, 2013, vol. 44, pp. 1862–7110.1007/s11661-012-1526-5 ↗
16. S.E. Offerman, N.H. Van Dijk, J. Sietsma, S. Grigull, E.M. Lauridsen, L. Margulies, H.F. Poulsen, M.T. Rekveldt, and S. Van der Zwaag: Science, 2002, vol. 298, pp. 1003–0510.1126/science.1076681 ↗
17. E.C.W. Perryman: JOM, 1955, vol. 7, pp. 1053–6310.1007/BF03377612 ↗
18. C. Haase and L.A. Barrales-Mora: Acta Mater., 2018, vol. 150, pp. 88–10310.1016/j.actamat.2018.02.048 ↗
19. S.S. Hansen, J.B. Vander Sande, and M. Cohen: Metall. Trans. A, 1980, vol. 11, pp. 387–40210.1007/BF02654563 ↗
20. H. Beladi, P. Cizek, and P.D. Hodgson: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1175–8910.1007/s11661-009-9799-z ↗
21. A.S. Taylor, P. Cizek, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 5832–4410.1016/j.actamat.2011.05.060 ↗
22. P. Mannan, A.G. Kostryzhev, H.S. Zurob, and E.V. Pereloma: Mater. Sci. Eng. A, 2015, vol. 641, pp. 160–7110.1016/j.msea.2015.06.041 ↗
23. W. Chen, C. Jia, B. Hu, C. Zheng, and D. Li: Mater. Sci. Eng. A, 2018, vol. 733, pp. 419–2810.1016/j.msea.2018.07.071 ↗
24. W. Charnock and J. Nutting: Met. Sci. J., 1967, vol. 1, pp. 123–2710.1179/msc.1967.1.1.123 ↗
25. T. Sakai, M. Ohashi, K. Chiba, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 1781–9010.1016/0001-6160(88)90246-5 ↗
26. R.H. Petrov and L.A.I. Kestens: in Encyclopedia of Iron, Steel, and Their Alloys, 1st ed., ed. R. Colás and G.E. Totten, Taylor and Francis, New York, 2016, pp. 46–6910.1081/E-EISA-120050786 ↗
27. D.P. Field, P.B. Trivedi, S.I. Wright, and M. Kumar: Ultramicroscopy, 2005, vol. 103, pp. 33–3910.1016/j.ultramic.2004.11.016 ↗
28. R.J. Wakelin and E.L. Yates: Proc. Phys. Soc. London, Sect. B, 1953, vol. 66, p. 22110.1088/0370-1301/66/3/310 ↗
29. G.L. Squires: Practical Physics, 4th ed. Cambridge University Press, Cambridge (UK), 200110.1017/CBO9781139164498 ↗
30. W.H. Kruskal and W.A. Wallis: J. Am. Stat. Assoc., 1952, vol. 47, pp. 583–62110.1080/01621459.1952.10483441 ↗
31. Y. Cao, H. Di, J. Zhang, J. Zhang, T. Ma, and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol. 585, pp. 71–8510.1016/j.msea.2013.07.037 ↗
32. D. Jia, W. Sun, D. Xu, L. Yu, X. Xin, W. Zhang, and F. Qi: J. Alloys Compd., 2019, vol. 787, pp. 196–20510.1016/j.jallcom.2019.02.055 ↗
33. J.C. Stinville, N. Vanderesse, F. Bridier, P. Bocher, and T.M. Pollock: Acta Mater., 2015, vol. 98, pp. 29–4210.1016/j.actamat.2015.07.016 ↗
34. J. Jiang, T.B. Britton, and A.J. Wilkinson: Acta Mater., 2013, vol. 61, pp. 7227–3910.1016/j.actamat.2013.08.027 ↗
35. C. Zhu, T. Harrington, V. Livescu, G.T. Gray III., and K.S. Vecchio: Acta Mater., 2016, vol. 118, pp. 383–9410.1016/j.actamat.2016.07.051 ↗
36. W. Yin and W. Wang: Mater. Charact., 2021, vol. 178, p. 11126510.1016/j.matchar.2021.111265 ↗
37. S.R. Yeratapally, M.G. Glavicic, M. Hardy, and M.D. Sangid: Acta Mater., 2016, vol. 107, pp. 152–6710.1016/j.actamat.2016.01.038 ↗
38. J.C. Stinville, E.R. Yao, P.G. Callahan, J. Shin, F. Wang, M.P. Echlin, T.M. Pollock, and D.S. Gianola: Acta Mater., 2019, vol. 168, pp. 152–6610.1016/j.actamat.2018.12.061 ↗
39. J. Li, S.J. Dillon, and G.S. Rohrer: Acta Mater., 2009, vol. 57, pp. 4304–1110.1016/j.actamat.2009.06.004 ↗
40. H. Beladi, N.T. Nuhfer, and G.S. Rohrer: Acta Mater., 2014, vol. 70, pp. 281–8910.1016/j.actamat.2014.02.038 ↗
41. C.-C. Yang, A.D. Rollett, and W.W. Mullins: Scripta Mater., 2001, vol. 44, pp. 2735–4010.1016/S1359-6462(01)00960-5 ↗
42. C. Shen, J. Li, and Y. Wang: Acta Mater., 2014, vol. 74, pp. 125–3110.1016/j.actamat.2014.03.065 ↗
43. L. Zhang, Y. Gu, and Y. Xiang: Acta Mater., 2017, vol. 126, pp. 11–2410.1016/j.actamat.2016.12.035 ↗