In-Situ Monitoring of Phase Transition and Microstructure Evolution in Ni-Based Superalloys by Electrical Resistivity: Direct Comparison With Differential Scanning Calorimetry and Application to Case Studies
Source abstract
Abstract
Abstract In this study, resistivity measurements are made during continuous heating and cooling on four different Ni-based superalloys of different grain structures and with different phases (i.e.,γ′ and carbide). The results are directly compared with differential scanning calorimetry (DSC) profiles to identify the material’s resistivity response. The resistivity measurements have been performed using an electro-thermal mechanical testing (ETMT) system having a capability of heating and cooling a sample at a rate of up to 100 K/s by Joule heating, which is not possible with standard heating methods used in previousin-situmicrostructure analysis approaches. By comparing different precipitate variations and thermal histories,γ′ volume fraction and precipitate number density are found to be the most important factors determining the resistivity of the materials.In-situresistivity measurement was applied to several case studies to show that it can provide microstructural information in complex high temperature experiments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. J.-Y. Guédou and L. Rémy: G. Cailletaud, J. Cormier, G. Eggeler, V. Maurel, and L.B.T.-N.B.S.C.A.L.S. Nazé, eds., Elsevier, 2022, pp. 3–19.
3. J. Cormier and C.-A. Gandin: G. Cailletaud, J. Cormier, G. Eggeler, V. Maurel, and L.B.T.-N.B.S.C.A.L.S. Nazé, eds., Elsevier, 2022, pp. 193–222.10.1016/B978-0-12-819357-0.00015-9 ↗
4. M. Durand-Charre: The Microstructure of Superalloys, 1st ed. CRC Press, Boca Raton, 1997.
5. D.L. Sponseller: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., The Minerals, Metals, & Materials Society, 1996, pp. 259–70.10.7449/1996/Superalloys_1996_259_270 ↗
6. L.A. Chapman: J. Mater. Sci., 2004, vol. 39, pp. 7229–36.10.1023/B:JMSC.0000048736.86794.12 ↗
7. C.J. Burton: in Superalloys, 1976, pp. 147–57.10.7449/1976/Superalloys_1976_147_157 ↗
8. M.P. Jackson, M.J. Starink, and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 264, pp. 26–38.10.1016/S0921-5093(98)01120-4 ↗
9. H.T. Pang, N. D’Souza, H. Dong, H.J. Stone, and C.M.F. Rae: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 889–906.10.1007/s11661-015-3252-2 ↗
10. C. Schwalbe, A. Jacques, E. Galindo-Nava, C.N. Jones, C.M.F. Rae, and J. Cormier: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 182–86.10.1016/j.msea.2018.10.033 ↗
11. S. Huang, K. An, Y. Gao, and A. Suzuki: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 740–51.10.1007/s11661-017-4455-5 ↗
12. D.M. Collins, D.J. Crudden, E. Alabort, T. Connolley, and R.C. Reed: Acta Mater., 2015, vol. 94, pp. 244–56.10.1016/j.actamat.2015.04.046 ↗
13. J.-B. le Graverend, A. Jacques, J. Cormier, O. Ferry, T. Schenk, and J. Mendez: Acta Mater., 2015, vol. 84, pp. 65–79.10.1016/j.actamat.2014.10.036 ↗
14. G. Bruno and H.C. Pinto: Mater. Sci. Technol., 2003, vol. 19, pp. 567–72.10.1179/026708303225002145 ↗
15. A. Royer and P. Bastie: Scr. Mater., 1997, vol. 36, pp. 1151–59.10.1016/S1359-6462(97)00012-2 ↗
16. F. Vogel, J. Cheng, S.B. Liang, C.B. Ke, S.S. Cao, X.P. Zhang, I. Zizak, A.M. Manzoni, J.M. Yu, N. Wanderka, and W. Li: J. Alloys Compd., 2022, vol. 919, p. 165845.10.1016/j.jallcom.2022.165845 ↗
17. S.L. Semiatin, S.-L. Kim, F. Zhang, and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1715–30.10.1007/s11661-015-2748-0 ↗
18. N. Chobaut, D. Carron, and J.M. Drezet: Mater. Sci. Forum, 2014, vol. 794–796, pp. 921–25.10.4028/www.scientific.net/MSF.794-796.921 ↗
19. D. Basak, R.A. Overfelt, and D. Wang: Int. J. Thermophys., 2003, vol. 24, pp. 1721–33.10.1023/B:IJOT.0000004101.88449.86 ↗
20. K.D. Maglić, N.L. Perović, and A.M. Stanimirović: Int. J. Thermophys., 1994, vol. 15, pp. 741–55.10.1007/BF01563797 ↗
21. B. Noble and S.E. Bray: Acta Mater., 1998, vol. 46, pp. 6163–71.10.1016/S1359-6454(98)00263-8 ↗
22. J.E. Darnbrough, B. Roebuck, and P.E.J. Flewitt: J. Appl. Phys., 2015, vol. 118, p. 184302.10.1063/1.4935290 ↗
23. B. Roebuck, D. Cox, and R. Reed: Scr. Mater., 2001, vol. 44, pp. 917–21.10.1016/S1359-6462(00)00662-X ↗
24. I.-E. Benrabah, G. Altinkurt, M. Fèvre, M. Dehmas, B. Denand, F. Fossard, J.-S. Mérot, G. Geandier, D. Locq, and M. Perrut: J. Alloys Compd., 2020, vol. 825, p. 154108.10.1016/j.jallcom.2020.154108 ↗
25. N. D’Souza, M.C. Hardy, B. Roebuck, W. Li, G.D. West, and D.M. Collins: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 2480–95.10.1007/s11661-022-06680-8 ↗
26. H. Conrad: Mater. Sci. Eng. A, 2000, vol. 287, pp. 227–37.10.1016/S0921-5093(00)00780-2 ↗
27. D. Fabrègue, B. Mouawad, and C.R. Hutchinson: Scr. Mater., 2014, vol. 92, pp. 3–6.10.1016/j.scriptamat.2014.07.004 ↗
28. A. Nicolaÿ, J.M. Franchet, J. Cormier, R.E. Logé, G. Fiorucci, J. Fausty, M. Van Der Meer, and N. Bozzolo: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4572–96.10.1007/s11661-021-06411-5 ↗
29. D.C. Cox, B. Roebuck, C.M.F. Rae, and R.C. Reed: Mater. Sci. Technol., 2003, vol. 19, pp. 440–46.10.1179/026708303225010731 ↗
30. N. D’Souza, B. Roebuck, D.M. Collins, G.D. West, and C. Panwisawas: Mater. Sci. Eng. A, 2020, vol. 773, p. 138862.10.1016/j.msea.2019.138862 ↗
31. E. Madhi and P.B. Nagy: AIP Conf. Proc., 2009, vol. 1096, pp. 1209–15.10.1063/1.3114092 ↗
32. R.J. White, G.A. Swallow, S.B. Fisher, and K.M. Miller: J. Nucl. Mater., 1975, vol. 55, pp. 273–78.10.1016/0022-3115(75)90067-7 ↗
33. S.J. Perry, N. D’Souza, D.M. Collins, B. Roebuck, and H.B. Dong: Metall. Mater. Trans. A. https://doi.org/10.1007/s11661-022-06861-5.10.1007/s11661-022-06861-5 ↗
34. S. Utada, R. Sasaki, R.C. Reed, and Y.T. Tang: Mater. Des., 2022, vol. 221, p. 110911.10.1016/j.matdes.2022.110911 ↗
35. G. Pottlacher, H. Hosaeus, E. Kaschnitz, and A. Seifter: Scand. J. Metall., 2002, vol. 31, pp. 161–68.10.1034/j.1600-0692.2002.310301.x ↗
36. B. Roebuck, D.C. Cox, and R.C. Reed: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., The Minerals, Metals, & Materials Society, 2004, pp. 523–28.10.7449/2004/Superalloys_2004_523_528 ↗
37. C.T. Sims: in Superalloys 1984, 1984, pp. 399–419.10.7449/1984/Superalloys_1984_399_419 ↗
38. A. Kracke: in 7th International Symposium on Superalloys718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, and G.P. Sjöberg, eds., The Minerals, Metals, & Materials Society, 2010, pp. 13–50.
39. A. Devaux, B. Picqué, M.F. Gervais, E. Georges, T. Poulain, and P. Héritier: Superalloys 2012, 2012.
40. A. Devaux, L. Berglin, L. Thebaud, R. Delattre, C. Crozet, and O. Nodin: MATEC Web Conf., https://doi.org/10.1051/matecconf/20141401004.10.1051/matecconf/20141401004 ↗
41. A. Sato, J.J. Moverare, M. Hasselqvist, and R.C. Reed: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2302–15.10.1007/s11661-011-0995-2 ↗
42. J.J. Moverare, M. Segersäll, A. Sato, S. Johansson, and R.C. Reed: Superalloys 2012, 2012.
43. K. Harris, G.L. Erickson, W.D. Brentnall, J.M. Aurrecoechea, S.L. Sikkenga, and K.G. Kubarych: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., 1992, pp. 297–306.10.7449/1992/Superalloys_1992_297_306 ↗
44. S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, and O.N. Senkov: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5357–67.10.1007/s11661-017-4296-2 ↗
45. Y.T. Tang, C. Schwalbe, M. Futoma, B. Roebuck, S. Utada, and R.C. Reed: Metall. Mater. Trans. A. https://doi.org/10.1007/s11661-022-06869-x.10.1007/s11661-022-06869-x ↗
46. S. Sulzer, E. Alabort, A. Németh, B. Roebuck, and R. Reed: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4214–35.10.1007/s11661-018-4673-5 ↗
47. A. Epishin, B. Fedelich, M. Finn, G. Künecke, B. Rehmer, G. Nolze, C. Leistner, N. Petrushin, and I. Svetlov: Crystals, 2021, vol. 11, p. 152.10.3390/cryst11020152 ↗
48. R.E. Silber, R.A. Secco, and W. Yong: J. Geophys. Res. Solid Earth, 2017, vol. 122, pp. 5064–81.10.1002/2017JB014259 ↗
49. H. Liu, L. Zheng, D. Wang, X. Wei, H. Min, Y. Jin, and Q. Tai: J. Mater. Eng. Perform. DOI:https://doi.org/10.1007/s11665-022-06768-7.10.1007/s11665-022-06768-7 ↗
50. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 981–95.10.1016/j.jallcom.2015.11.002 ↗
51. H.E. Collins: in 1st International Symposium on Structural Stability of Superalloys, 1968, pp. 171–98.10.7449/1968/Superalloys_1968_171_198 ↗
52. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Sugiyama, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4029–41.10.1007/s11661-018-4710-4 ↗
53. C. Rae, M. Karunaratne, C. Small, R. Broomfield, C. Jones, and R. Reed: in Superalloys 2000, 2000, pp. 767–76.10.7449/2000/Superalloys_2000_767_776 ↗
54. A.R.P. Singh, S. Nag, S. Chattopadhyay, Y. Ren, J. Tiley, G.B. Viswanathan, H.L. Fraser, and R. Banerjee: Acta Mater., 2013, vol. 61, pp. 280–93.10.1016/j.actamat.2012.09.058 ↗
55. L. Zhu, H. Pan, J. Cheng, L. Xiao, J. Guo, and H. Ji: J. Alloys Compd., 2022, vol. 918, p. 165677.10.1016/j.jallcom.2022.165677 ↗
56. S.S. Babu, M.K. Miller, J.M. Vitek, and S.A. David: Acta Mater., 2001, vol. 49, pp. 4149–60.10.1016/S1359-6454(01)00314-7 ↗
57. Y.T. Tang, C. Panwisawas, B.M. Jenkins, J. Liu, Z. Shen, E. Salvati, Y. Gong, J.N. Ghoussoub, S. Michalik, B. Roebuck, P.A.J. Bagot, S. Lozano-Perez, C.R.M. Grovenor, M.P. Moody, A.M. Korsunsky, D.M. Collins, and R.C. Reed: Addit. Manuf., 2022, p. preprint.
58. M.B. Henderson, D. Arrell, R. Larsson, M. Heobel, and G. Marchant: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 13–21.10.1179/136217104225017099 ↗
59. F. Pedraza and S. Utada: in Nickel Base Single Crystals Across Length Scales, G. Cailletaud, J. Cormier, G. Eggeler, and V. Maurel, eds., Elsevier, 2022, pp. 259–81.10.1016/B978-0-12-819357-0.00017-2 ↗
60. M. Gäumann, C. Bezençon, P. Canalis, and W. Kurz: Acta Mater., 2001, vol. 49, pp. 1051–62.10.1016/S1359-6454(00)00367-0 ↗
61. R.C. Reed and H.K.D.H. Bhadeshia: Acta Metall. Mater., 1994, vol. 42, pp. 3663–78.10.1016/0956-7151(94)90432-4 ↗
62. J. Andersson, G.P. Sjöberg, L. Viskari, and M. Chaturvedi: Mater. Sci. Technol., 2013, vol. 29, pp. 43–53.10.1179/1743284712Y.0000000108 ↗
63. B. Ruttert, D. Bürger, L.M. Roncery, A.B. Parsa, P. Wollgramm, G. Eggeler, and W. Theisen: Mater. Des., 2017, vol. 134, pp. 418–25.10.1016/j.matdes.2017.08.059 ↗
64. O.M. Horst, B. Ruttert, D. Bürger, L. Heep, H. Wang, A. Dlouhý, W. Theisen, and G. Eggeler: Mater. Sci. Eng. A, 2019, vol. 758, pp. 202–14.10.1016/j.msea.2019.04.078 ↗
65. S. Utada, J. Rame, S. Hamadi, J. Delautre, L. Mataveli Suave, P. Villechaise, and J. Cormier: in Superalloys 2020, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., Springer International Publishing, 2020, pp. 240–52.10.1007/978-3-030-51834-9_23 ↗
66. Z. Li, X. Fan, Q. Xu, and B. Liu: Mater. Lett., 2015, vol. 160, pp. 318–22.10.1016/j.matlet.2015.07.120 ↗
67. M. Sakaguchi, M. Ike, and M. Okazaki: Mater. Sci. Eng. A, 2012, vol. 534, pp. 253–59.10.1016/j.msea.2011.11.066 ↗
68. S. Hamadi, F. Hamon, J. Delautre, J. Cormier, P. Villechaise, S. Utada, P. Kontis, and N. Bozzolo: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4246–61.10.1007/s11661-018-4748-3 ↗
69. S. Utada, J. Rame, S. Hamadi, J. Delautre, P. Villechaise, and J. Cormier: Mater. Sci. Eng. A, 2020, vol. 789, p. 139571.10.1016/j.msea.2020.139571 ↗
70. S. Utada, L. Després, and J. Cormier: Metals, 2021, vol. 11, p. 1610.10.3390/met11101610 ↗
71. R.C. Reed, D.C. Cox, and C.M.F. Rae: Mater. Sci. Eng. A, 2007, vol. 448, pp. 88–96.10.1016/j.msea.2006.11.101 ↗
72. A. Deschamps and C.R. Hutchinson: Acta Mater., 2021, vol. 220, p. 117338.10.1016/j.actamat.2021.117338 ↗
73. B. Fultz, L. Anthony, L.J. Nagel, R.M. Nicklow, and S. Spooner: Phys. Rev. B, 1995, vol. 52, pp. 3315–21.10.1103/PhysRevB.52.3315 ↗
74. R.J. Mitchell, M. Preuss, S. Tin, and M.C. Hardy: Mater. Sci. Eng. A, 2008, vol. 473, pp. 158–65.10.1016/j.msea.2007.04.098 ↗
75. S. Sulzer, Z. Li, S. Zaefferer, S.M. Hafez Haghighat, A. Wilkinson, D. Raabe, and R. Reed: Acta Mater., 2020, vol. 185, pp. 13–27.10.1016/j.actamat.2019.07.018 ↗
76. Y.T. Tang, N. D’Souza, B. Roebuck, P. Karamched, C. Panwisawas, and D.M. Collins: Acta Mater., 2021, vol. 203, p. 116468.10.1016/j.actamat.2020.11.010 ↗
77. J.N. Ghoussoub, Y.T. Tang, W.J.B. Dick-Cleland, A.A.N. Németh, Y. Gong, D.G. McCartney, A.C.F. Cocks, and R.C. Reed: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 962–83.10.1007/s11661-021-06568-z ↗