journal article·2020-12Open access

Influence of Hot Isostatic Pressing on the Hot Ductility of Cast Alloy 718: The Effect of Niobium and Minor Elements on the Liquation Mechanism

Sukhdeep Singh, Fabian Hanning, Joel Andersson

Abstract

Abstract The influence of two hot isostatic pressing (HIP) treatments on liquation behavior was investigated and compared with regard to the extent of heat-affected zone liquation cracking in cast Alloy 718. The extent of liquation was seen to increase after HIP treatment at 1190 °C due to solute changes caused by the homogenization of Nb, which contributed to extensive grain boundary melting. The HIP treatment at 1120 °C exhibited lower liquation with contributions from particle liquation of the Laves phase and constitutional liquation of NbC carbides. This was also reflected in a lower ductility recovery temperature, with slower recovery for the former due to the extensive liquation. Interestingly, the nil ductility temperatures were both below the predicted equilibrium solidus of the alloy, which suggests that the ductility drop is related to liquation caused by solute segregation at the grain boundaries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H.L. Eiselstein: Patent No. 3,046,108, 1962.
2. R. G. Thompson: JOM, 1988, vol. 40, no. 7, pp. 44–48.10.1007/BF03258151 ↗
3. W. A. Baeslack and D. E. Nelson: Metall., 1986 vol. 19, no. 3, pp. 371–379.
4. I. Woo, K. Nishimoto, K. Tanaka, and M. Shirai: Weld. Int., 2000, vol. 14, no. 7, pp. 523–532.10.1080/09507110009549224 ↗
5. S.L. West: Phd Thesis, The Ohio State University, 1991.
6. S. Benhaddad, N.L. Richards, U. Prasad, H. Guo, and M. C. Chaturvedi: in Super. 2000 Ninth International Symposium, 2000, pp. 703–11.
7. X. Huang, M. C. Chaturvedi, N. L. Richards, and J. Jackman: Act. Mat., 1997, vol. 45, no. 8, pp. 3095–3107.10.1016/S1359-6454(97)00017-7 ↗
8. T. Alam, P.J. Felfer, M. Chaturvedi, L. T. Stephenson, M. R. Kilburn, and J. M. Cairney: Metall. Mater. Trans A., 2012, vol. 43A, no. 7, pp. 2183–91.10.1007/s11661-012-1085-9 ↗
9. S. Singh and J. Andersson: Sci. Technol. Weld. Joint., 2018, pp. 1–7.
10. M.L. Barron: Report No. DOT/FAA/AR-97/88, GE Aircraft Engines Cincinnati Ohio, 1999.
11. S.M. Snyder and E.E. Brown: Patent No 4,750,944, 1988.
12. D.F. Paulonis and J.J. Schirra: Superalloys, 2001, 718.625,706: 13–23.10.7449/2001/Superalloys_2001_13_23 ↗
13. Q. Lu: PhD Thesis, The Ohio State University, 1999.
14. S. Singh: Licentiate Thesis, Chalmers University of Technology, 2018.
15. W. Chen, M. C. Chaturvedi, and N. L. Richards: Met. and Mat. Tran., 2001 vol. 32A, p. 931.10.1007/s11661-001-0350-0 ↗
16. H. Guo, M. C. Chaturvedi, and N. L. Richards: Sci. Technol. Weld. Joint., 1999, vol. 4, no. 4, pp. 257–64.10.1179/136217199101537761 ↗
17. B.G. Muralidharan, V. Shankar, T.P. Gill: Report No. IGC-175, Indira Gandhi Centre for Atomic Research, 1996.
18. Y. Zhu, S. Zhang, T. Zhang, L. Lou, Y. Tong, X. Ning, Z. Hu, X. Xie: Sup. 718, 625, 706 and Var. Der., 1994, pp. 89–98.10.7449/1994/Superalloys_1994_89_98 ↗
19. J.T. Guo and L.Z. Zhou: Superalloys, 1996, pp. 451–55.10.7449/1996/Superalloys_1996_451_455 ↗
20. T.J. Kelly: Weld. J, 1989, vol. 68, no. 2, pp. 44s–51s.
21. J. N. DuPont, C. V. Robino, and A. R. Marder: Weld. Res. Supp., 1998, 64: 417-431.
22. S. Benhadad, N. L. Richards, and M. C. Chaturvedi: Metall. Mater. Trans. A, 2002, vol. 33, no. 7, pp. 2005–2017.10.1007/s11661-002-0033-5 ↗
23. M. S. A. Karunaratne and R. C. Reed: Defect and Diffusion forum, 2005, Vol. 237, pp. 420-425.10.4028/www.scientific.net/DDF.237-240.420 ↗
24. D.A. Porter, K.E. Easterling, and M.Y. Sherif: Phase Transformations in Metals and Alloys, (Revised reprint) 2009, pp. 105–06.10.1201/9781439883570 ↗
25. P.G. Shewmon: Diffusion in Solids, 2 ed. Warrendale,, 1989, pp. 189–222.
26. B. Radhakrishnan and R. G. Thompson, Met. and Mat. Trans. A, vol. 23, no. 6, pp. 1783–1799, 1992.10.1007/BF02804371 ↗