Hardness Prediction of the Heat-Affected Zone in Multilayer Welded SUS316 Stainless Steel Based on Dislocation Density Change Behavior
Source abstract
Abstract
Abstract The effects of strain hardening and recovery/recrystallization on the hardness of the heat-affected zone (HAZ) in multilayer welded austenitic stainless steel SUS316 were investigated in this study. The results revealed that strain hardening due to welding strain and softening due to recovery/recrystallization were the dominant factors affecting the hardness change in the HAZ during multilayer welding process. Furthermore, the relationship between the strain and dislocation density and that between the recovery/recrystallization and dislocation density were quantitatively investigated using positron annihilation lifetime spectroscopy. Based on these results, a new hardness prediction method based on the change in dislocation density in the HAZ during multilayer welding was proposed. The hardness values in the HAZ after the multilayer welding were predicted based on the simulated strain and thermal history, and the calculated hardness values agreed well with the measured results. This indicates that the newly proposed hardness prediction method based on the dislocation density change behavior in the HAZ during multilayer welding is valuable and effective for selecting the appropriate welding conditions before actual welding.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Muon and positron interactions and applications · Fusion materials and technologies · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. K. Sieradzki and R.C. Newman: J. Phys. Chem. Solids, 1987, vol. 48, pp. 1101–13.10.1016/0022-3697(87)90120-X ↗
2. X. Xie, D. Ning, B. Chen, S. Lu, and J. Sun: Corros. Sci., 2016, vol. 12, pp. 576–84.10.1016/j.corsci.2016.08.014 ↗
3. K. Takamori, S. Suzuki, and K. Kumagai: Maintenology, 2004, vol. 3, pp. 52–58.
4. M. Koshiishi, M. Okada, H. Fujimori, and A. Hirano: Hitachi Rev., 2009, vol. 91, pp. 214–17.
5. S. Suzuki, K. Takamori, K. Kumagai, S. Ooki, T. Fukuda, H. Yamashita, and T. Futami: Pres. Eng. J. Jpn. High Pres. Inst., 2004, vol. 42, pp. 188–98.
6. The Kansai Electric Power Co., Inc.: Regarding Significant Indications at Ohi Power Station Unit 3 Pressurizer Spray Line Piping Welds. 2020.
7. N. Ishiyama, M. Mayuzumi, Y. Mizutani, and J. Tani: J. Jpn. Inst. Mater., 2005, vol. 69, pp. 1049–52.
8. O. Raquet, E. Herms, F. Vaillant, and T. Couvant: Adv. Mat. Sci., 2007, vol. 7, pp. 33–46.
9. T. Masuoka, M. Mayuzumi, T. Arai, and J. Tani: Zairyo-to-Kankyo, 2007, vol. 56, pp. 93–98.10.3323/jcorr.56.93 ↗
10. M. Aoki, T. Terachi, T. Yamada, and K. Arioka: INSS J., 2012, vol. 19, pp. 118–30.
11. R. Ihara, T. Hashimoto, and M. Mochizuki: J. Soc. Mat. Sci. Japan, 2012, vol. 61, pp. 961–66.10.2472/jsms.61.961 ↗
12. L. Yu, K. Nishimoto, and K. Saida: J. Mat. Sci. Eng. A, 2023, vol. 13, pp. 13–25.
13. K. Kako, J. Ohta, and M. Mayuzumi: J. Jap. Inst. Metals, 2006, vol. 70, pp. 694–99.10.2320/jinstmet.70.694 ↗
14. Y.C. Jean: Microchem. J., 1990, vol. 42, pp. 72–102.10.1016/0026-265X(90)90027-3 ↗
15. O. Shpotyuk, A. Ingram, and Ya. Shpotyuk: Nucl. Instrum. Methods Phys. Res., Sect. B, 2018, vol. 416, pp. 102–109.10.1016/j.nimb.2017.12.012 ↗
16. B. Li, V. Krsjak, J. Degmova, Z. Wang, T. Shen, H. Li, S. Sojak, V. Slugen, and A. Kawasuso: J. Nucl. Mater., 2020, vol. 535, pp. 152–80.10.1016/j.jnucmat.2020.152180 ↗
17. K. Saarinen, P. Hautojärvi, and C. Corbe: Semicond. Semimet, 1998, vol. 51, pp. 209–85.10.1016/S0080-8784(08)63057-4 ↗
18. P. Kirkegaard, M. Eldrup, O.E. Mogensen, and N.J. Pedersen: Comput. Phys. Commun., 1981, vol. 23, pp. 307–35.10.1016/0010-4655(81)90006-0 ↗
19. P. Kirkegaard and M. Eldrup: Comput. Phys. Commun., 1974, vol. 7, pp. 401–409.10.1016/0010-4655(74)90070-8 ↗
20. D. Deng, H. Murakawa, and M. Shibahara: Comp. Mat. Sci., 2010, vol. 48, pp. 187–94.10.1016/j.commatsci.2009.12.027 ↗
21. J. Park, G. An, N. Ma, and S. Kim: J. Manuf. Process., 2023, vol. 102, pp. 182–94.10.1016/j.jmapro.2023.07.043 ↗
22. D. Deng and S. Kiyoshima: Nucl. Eng. Des., 2010, vol. 240, pp. 688–96.10.1016/j.nucengdes.2009.11.049 ↗
23. T. Kuwabara: J. Jap. Inst. Light Met., 2007, vol. 57, pp. 218–25.10.2464/jilm.57.218 ↗
24. P.L. Andresen: Corrosion, 2013, vol. 9, pp. 1024–38.10.5006/0801 ↗
25. S. Suzuki, K. Takamori, K. Kumagai, A. Sakashita, N. Yamashita, C. Shitara, and Y. Okamura: E.-J. Adv. Maint., 2019, vol. 1, pp. 1–29.
26. T. Masumura, Y. Seto, T. Tsuchiyama, and K. Kimura: Mater. Trans., 2019, vol. 59, pp. 222–29.
27. T. Kato, S. Sato, Y. Saito, H. Todoroki, and S. Suzuki: Adv. X-ray. Chem. Anal. Jpn., 2016, vol. 47, pp. 167–72.
28. K. Sawada, K. Maruyama, R. Komine, and Y. Naga: Tetsu-to-Hagane, 1997, vol. 83, pp. 54–59.10.2355/tetsutohagane1955.83.7_466 ↗
29. M. Kumagai, K. Akita, M. Imafuku, and S. Ohya: Mater. Sci. Eng. A, 2014, vol. 608, pp. 21–24.10.1016/j.msea.2014.04.061 ↗
30. W. Li, M. Vittorietti, G. Jongbloed, and J. Sietsma: J. Mater. Sci. Technol., 2020, vol. 45, pp. 35–43.10.1016/j.jmst.2019.11.025 ↗
31. L. Yu, K. Saida, H. Araki, K. Sugita, M. Mizuno, K. Nishimoto, and N. Chigusa: Mater. Sci. Eng. A, 2020, vol. 796, 140221.10.1016/j.msea.2020.140221 ↗
32. W.A. Johnson and K.F. Mehl: Trans. Am. Inst. Min. (Metall.) Eng., 1939, vol. 135, pp. 416–42.
33. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12.10.1063/1.1750380 ↗
34. M. Fanfoni and M. Tomellini: IL NUOVO CIMENTO, 1998, vol. 20D, pp. 1171–82.10.1007/BF03185527 ↗
35. L. Yu, K. Saida, K. Nishimoto, I. Asai, and N. Chigusa: Maintenology, 2022, vol. 20, pp. 83–90.
36. R.V. Patil and B.D. Sharma: Met. Sci., 1982, vol. 16, pp. 389–92.10.1179/030634582790427406 ↗
37. A.F. Smith: Met. Sci., 1975, vol. 9, pp. 375–78.10.1179/030634575790444270 ↗
38. T. Kunitake: J. Jpn. Inst. Met., 1964, vol. 3, pp. 466–76.