journal article·2023-11Open access

On the Temperature-Dependence of Deformation-Induced Martensite Formation in AISI 304L Type Steel

G. Egels, M. Bussmann, S. Benito, S. Weber

Abstract

Abstract In this study, the deformation-induced α-martensite formation in AISI 304L steel was investigated in the temperature range between 75 °C and − 196 °C in the light of the temperature-dependence of hydrogen embrittlement phenomena. For this purpose, tensile tests with in-situ and ex-situ magnetic measurement of the α-martensite volume content as a function of plastic strain were carried out. In addition, a theoretical assessment of the temperature-dependence of the austenite stability was undertaken, evaluating chemical and non-chemical driving force contributions to the martensitic γ → α transformation as proposed by Ghosh and Olson. The experimental results clearly show an increase in the α-martensite volume content and a shifting of the phase transformation to lower strain levels upon reducing the temperature to − 75 °C. A further reduction of the temperature to − 196 °C revealed to have no significant impact on the α-martensite formation. The theoretical assessments indicate a similar temperature-dependence of the austenite stability as observed experimentally and suggest contributions of the thermal friction work at the fcc/bcc interface to be responsible for a constant austenite stability in low-temperature regimes. Additional investigations of deformed microstructures showed that element segregation effects on the local austenite stability are pronounced around room temperature, but become less relevant at low temperatures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. T. Michler, J. Naumann, M. Hock, K. Berreth, M.P. Balogh, and E. Sattler: Mater. Sci. Eng. A, 2015, vol. 628, pp. 252–61.10.1016/j.msea.2015.01.054 ↗
2. T. Michler, J. Naumann, S. Weber, M. Martin, and R. Pargeter: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 9935–41.10.1016/j.ijhydene.2013.05.145 ↗
3. M. Martin, S. Weber, W. Theisen, T. Michler, and J. Naumann: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 15888–98.10.1016/j.ijhydene.2011.09.013 ↗
4. S. Weber, M. Martin, and W. Theisen: J. Mater. Sci., 2012, vol. 47, pp. 6095–6107.10.1007/s10853-012-6526-8 ↗
5. T. Michler, M. Lindner, U. Eberle, and J. Meusinger: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies: Volume 1: The Problem, Its Characterisation and Effects on Particular Alloy Classes, Woodhead Publishing Ltd, Cambridge, 2012, pp. 94–125.
6. L. Zhang, M. Wen, M. Imade, S. Fukuyama, and K. Yokogawa: Acta Mater., 2008, vol. 56, pp. 3414–21.10.1016/j.actamat.2008.03.022 ↗
7. C. Izawa, S. Wagner, M. Deutges, M. Martín, S. Weber, R. Pargeter, T. Michler, H.-H. Uchida, R. Gemma, and A. Pundt: Int. J. Hydrogen Energy, 2019, vol. 44, pp. 25064–75.10.1016/j.ijhydene.2019.07.179 ↗
8. B.S. Kumar, V. Kain, M. Singh, and B. Vishwanadh: Mater. Sci. Eng. A, 2017, vol. 700, pp. 140–51.10.1016/j.msea.2017.05.086 ↗
9. G. Han, J. He, S. Fukuyama, and K. Yokogawa: Acta Mater., 1998, vol. 46, pp. 4559–70.10.1016/S1359-6454(98)00136-0 ↗
10. L. Kaufman and M. Cohen: Prog. Met. Phys., 1958, vol. 7, pp. 165–246.10.1016/0502-8205(58)90005-4 ↗
11. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–53.10.1179/030634582790427316 ↗
12. C. Quitzke, C. Schröder, C. Ullrich, M. Mandel, L. Krüger, O. Volkova, and M. Wendler: Mater. Sci. Eng. A, 2021, vol. 808, p. 140930.10.1016/j.msea.2021.140930 ↗
13. U. Krupp, C. West, and H.-J. Christ: Mater. Sci. Eng. A, 2008, vol. 481–482, pp. 713–17.10.1016/j.msea.2006.12.211 ↗
14. A. Zergani, H. Mirzadeh, and R. Mahmudi: Steel Res. Int., 2020, vol. 91, p. 2000114.10.1002/srin.202000114 ↗
15. N. Tsuchida, Y. Morimoto, T. Tonan, Y. Shibata, K. Fukaura, and R. Ueji: ISIJ Int., 2011, vol. 51, pp. 124–29.10.2355/isijinternational.51.124 ↗
16. C. Zheng and W. Yu: Mater. Sci. Eng. A, 2018, vol. 710, pp. 359–65.10.1016/j.msea.2017.11.003 ↗
17. A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1875–86.10.1007/s11661-006-0130-y ↗
18. G.R. Caskey: Hydrogen Degradation of Ferrous Alloys, Noyes Publications, Park Ridge, NJ, 1985, pp. 822–62.
19. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
20. T. Michler, A.A. Yukhimchuk, and J. Naumann: Corros. Sci., 2008, vol. 50, pp. 3519–26.10.1016/j.corsci.2008.09.025 ↗
21. V.Y. Ilichev, L.V. Skibina, and M.M. Chernik: Austenitic Steels at Low Temperatures, Springer, Boston, MA, 1983, pp. 69–82.10.1007/978-1-4613-3730-0_4 ↗
22. M. Hauser, M. Wendler, O. Fabrichnaya, O. Volkova, and J. Mola: Mater. Sci. Eng. A, 2016, vol. 675, pp. 415–20.10.1016/j.msea.2016.08.080 ↗
23. Z. Wang and M.X. Huang: Metall. Trans. A, 2019, vol. 50, pp. 5650–55.10.1007/s11661-019-05465-w ↗
24. I. Janeiro, O. Hubert, and J.-H. Schmitt: Int. J. Plast., 2022, vol. 154, p. 103248.10.1016/j.ijplas.2022.103248 ↗
25. K. Nohara, Y. Ono, and N. Ohashi: ISIJ Int., 1977, vol. 63, pp. 772–82.
26. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
27. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, vol. 183, pp. 349–59.
28. H.-S. Yang, J.H. Jang, H. Bhadeshia, and D.W. Suh: Calphad, 2012, vol. 36, pp. 16–22.10.1016/j.calphad.2011.10.008 ↗
29. S. Martin, O. Fabrichnaya, and D. Rafaja: Mater. Lett., 2015, vol. 159, pp. 484–88.10.1016/j.matlet.2015.06.087 ↗
30. M. Martin, S. Weber, and W. Theisen: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 14887–95.10.1016/j.ijhydene.2013.08.133 ↗
31. A. Borgenstam and M. Hillert: J. Phys. IV France, 1997, vol. 07, pp. C5-23–C5-28.10.1051/jp4:1997503 ↗
32. M. Hauser, M. Wendler, A. Weiß, O. Volkova, and J. Mola: Adv. Eng. Mater., 2019, vol. 21, p. 1800676.10.1002/adem.201800676 ↗
33. S. Benito, G. Egels, A. Hartmaier, and S. Weber: Mater. Today Commun., 2023, vol. 34, p. 105016.10.1016/j.mtcomm.2022.105016 ↗
34. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
35. G. Ghosh and G.B. Olson: JPE, 2001, vol. 22, pp. 199–207.10.1361/105497101770338653 ↗
36. G. Egels, L. Mujica Roncery, R. Fussik, W. Theisen, and S. Weber: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 5206–16.10.1016/j.ijhydene.2018.01.062 ↗
37. T. Michler, Y. Lee, R.P. Gangloff, and J. Naumann: Int. J. Hydrogen Energy, 2009, vol. 34, pp. 3201–09.10.1016/j.ijhydene.2009.02.015 ↗
38. M. Martin, S. Weber, C. Izawa, S. Wagner, A. Pundt, and W. Theisen: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 11195–206.10.1016/j.ijhydene.2011.05.133 ↗
39. M. Radajewski, R. Eckner, S. Decker, M. Wendler, and L. Krüger: Adv. Eng. Mater., 2019, vol. 21, p. 1800617.10.1002/adem.201800617 ↗
40. M. Martin, S. Weber, W. Theisen, T. Michler, and J. Naumann: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 5989–6001.10.1016/j.ijhydene.2013.02.127 ↗
41. C. Müller-Bollenhagen. Verformungsinduzierte Martensitbildung bei mehrstufiger Umformung und deren Nutzung zur Optimierung der HCF- und VHCF-Eigenschaften von austenitischem Edelstahlblech. Dissertation, Siegen, 2011.
42. R. Fussik. Untersuchung der mikrostrukturellen Stabilität in Relation mit der Wasserstoffversprödung von austenitischen FeCrNi-Legierungen. Dissertation, Bergische Universität Wuppertal, 2020.
43. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1905–14.
44. F.C. Nascimento, C.E. Foerster, S.L.R. Da Silva, C.M. Lepienski, C.J. de Mesquita Siqueira, and C. Alves Junior: Mater. Res., 2009, vol. 12, pp. 173–80.10.1590/S1516-14392009000200011 ↗
45. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
46. G. Ghosh and G.B. Olson: Acta Metall. Mater., 1994, vol. 42, pp. 3371–79.10.1016/0956-7151(94)90469-3 ↗
47. R.L. Tobler, D.H. Beekman, and R.P. Reed: Austenitic Steels at Low Temperatures, Springer, Boston, MA, 1983, pp. 135–57.10.1007/978-1-4613-3730-0_8 ↗
48. L. Krüger, T. Halle, L.W. Meyer, U. Brüx, and G. Frommeyer: Mat.-wiss. u. Werkstofftech., 2005, vol. 36, pp. 299–306.10.1002/mawe.200500882 ↗
49. J. Talonen. Effect of Strain-Induced α′-Martensite Transformation on Mechanical Properties of Metastable Austenitic Stainless Steels. Dissertation, Espoo, Finland, 2007.
50. G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6, pp. 791–95.10.1007/BF02672301 ↗
51. T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165–74.
52. P.M. Ahmedabadi, V. Kain, and A. Agrawal: Mater. Des., 2016, vol. 109, pp. 466–75.10.1016/j.matdes.2016.07.106 ↗
53. H.M. Ledbetter and E.W. Collings: Mater. Sci. Eng., 1985, vol. 68, pp. 233–37.10.1016/0025-5416(85)90412-4 ↗
54. H. Ledbetter: Physica B, 1990, vol. 161, pp. 91–95.10.1016/0921-4526(89)90111-7 ↗
55. S. Chen, C. Chung, C. Yan, and T. Hsu: Mater. Sci. Eng. A, 1999, vol. 264, pp. 262–68.10.1016/S0921-5093(98)01105-8 ↗
56. L. Warnes and H.W. King: Cryogenics, 1976, vol. 16, pp. 659–67.10.1016/0011-2275(76)90038-2 ↗
57. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
58. D. San Martín, K. Aarts, P. Rivera-Díaz-del-Castillo, N.H. van Dijk, E. Brück, and S. van der Zwaag: J. Magn. Magn. Mater., 2008, vol. 320, pp. 1722–28.10.1016/j.jmmm.2008.02.002 ↗
59. R. Fussik and S. Weber: J. Mater. Sci. Eng. A, 2016, vol. 6, pp. 243–53.
60. R. Fussik, G. Egels, W. Theisen, and S. Weber: MSF, 2018, vol. 941, pp. 263–68.10.4028/www.scientific.net/MSF.941.263 ↗
61. F. Sadeghi, T. Zargar, J.W. Kim, Y.-U. Heo, J.S. Lee, and C.H. Yim: Mater. Charact., 2021, vol. 175, p. 111063.10.1016/j.matchar.2021.111063 ↗
62. J. Man, M. Smaga, I. Kuběna, D. Eifler, and J. Polák: Eng. Fract. Mech., 2017, vol. 185, pp. 139–59.10.1016/j.engfracmech.2017.04.041 ↗
63. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
64. J.L. Wang, M.H. Huang, X.H. Xi, C.C. Wang, and W. Xu: Mater. Charact., 2020, vol. 163, p. 110234.10.1016/j.matchar.2020.110234 ↗
65. J. Venables: J. Phys. Chem. Solids, 1964, vol. 25, pp. 693–700.10.1016/0022-3697(64)90178-7 ↗
66. O. Grässel, L. Krüger, G. Frommeyer, and L. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
67. S. Ahmadi, H. Arabi, A. Shokuhfar, and A. Rezaei: J. Mater. Sci. Technol., 2009, vol. 25, pp. 592–96.