Deformation Mechanisms Rationalisation to Design for Creep Resistance in Polycrystalline Ni-Based Superalloys
Source abstract
Abstract
Abstract Creep strength in polycrystalline Ni-based superalloys is influenced by the formation of a rich variety of planar faults forming within the strengthening $$\gamma '$$ phase. The lengthening and thickening rate of these faults – and therefore the creep rate – depends on an intriguing combination of dislocation interactions at the $$\gamma $$-$$\gamma '$$ interface and diffusional processes of the alloying elements at the core of the fault tip. The effect of alloy composition on this process is not fully understood. In this work we use correlative high resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy to study the deformation faults in two different Ni-based superalloys with carefully designed ratios of disordering-to-ordering-promoting elements (Co-Cr against Nb-Ta-Ti). The results show that the additions of ordering-promoting elements reduce the diffusional processes required for the faults to lengthen and thicken thus reducing the creep rates found for the higher Nb-Ta-Ti alloy. These insights provide a path to follow in the design of improved grades of creep-resistant polycrystalline alloys beyond 700 $$^\circ $$C.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. D. Barba, D. Pedrazzini, A. Collins, A.J. Wilkinson, M.P. Moody, P.A.J. Bagot, A. Jérusalem, and R.C. Reed: Acta Mater., 2017, vol. 127, pp. 37–40.
2. A.J. Egan, Y. Rao, G.B. Viswanathan, T.M. Smith, M. Ghazisaeidi, S. Tin, and M.J. Mills: in Superalloys 2020, Springer, Cham, 2020, pp. 640–50. https://link.springer.com/chapter/10.1007/978-3-030-51834-9_62.10.1007/978-3-030-51834-9_62 ↗
3. Y.M. Eggeler, J. Müller, M.S. Titus, A. Suzuki, T.M. Pollock, and E. Spiecker: Acta Mater., 2016, vol. 113, pp. 35–349.10.1016/j.actamat.2016.03.077 ↗
4. L.P. Freund, O.M. Messé, J.S. Barnard, M. Göken, S. Neumeier, and C.M. Rae, Acta Mater., 2017, vol. 123, pp. 295–304.10.1016/j.actamat.2016.10.048 ↗
5. P. Kontis: Scripta Mater., 2021, vol. 194, p. 11362610.1016/j.scriptamat.2020.11.011 ↗
6. P. Kontis, Z. Li, D.M. Collins, J. Cormier, D. Raabe, and B. Gault: Scripta Mater., 2018, vol. 145, pp. 76–80.10.1016/j.scriptamat.2017.10.005 ↗
7. L. Lilensten, S. Antonov, B. Gault, S. Tin, and P. Kontis: Acta Mater., 2021, vol. 202, pp. 232–4210.1016/j.actamat.2020.10.062 ↗
8. S.K. Makineni, A. Kumar, M. Lenz, P. Kontis, T. Meiners, C. Zenk, S. Zaefferer, G. Eggeler, S. Neumeier, E. Spiecker, D. Raabe, and B. Gault: Acta Mater., 2018, vol. 155, pp. 362–71. https://doi.org/10.1016/j.actamat.2018.05.074.10.1016/j.actamat.2018.05.074 ↗
9. T. Smith, Y. Rao, Y. Wang, M. Ghazisaeidi, and M. Mills: Acta Mater., 2017, vol. 141, pp. 261–72.10.1016/j.actamat.2017.09.027 ↗
10. R.C. Reed: The Superalloys: Fundamentals and Applications. Cambridge University Press, 2008. https://www.cambridge.org/core/books/superalloys/00CEE7E1026FA82BBC9F335E75D57AB2.
11. R.C. Reed and C.M.F. Rae: in Physical Metallurgy, 5th ed., D.E. Laughlin and K. Hono, eds., Elsevier, 2014, pp. 2215–90. https://www.sciencedirect.com/science/article/pii/B9780444537706000228.10.1016/B978-0-444-53770-6.00022-8 ↗
12. D. Barba, T. Smith, J. Miao, M. Mills, and R. Reed: Metall. Mater. Trans. A, 2018, vol. 49(9), pp. 4173–85.10.1007/s11661-018-4567-6 ↗
13. A.J. Egan, F. Xue, Y. Rao, G. Sparks, E. Marquis, M. Ghazisaeidi, S. Tin, and M.J. Mills: Acta Mater., 2022, vol. 238, p. 118206.10.1016/j.actamat.2022.118206 ↗
14. Y. Eggeler, K. Vamsi, and T. Pollock: Annu. Rev. Mater. Res., 2021, vol. 51(1), pp. 209–40.10.1146/annurev-matsci-102419-011433 ↗
15. L. Feng, Y. Rao, M. Ghazisaeidi, M.J. Mills, and Y. Wang: Acta Mater., 2020, vol. 200, pp. 223–35.10.1016/j.actamat.2020.08.056 ↗
16. S. Lu, S. Antonov, F. Xue, L. Li, and Q. Feng: Acta Mater., 2021, vol. 215, p. 117099.10.1016/j.actamat.2021.117099 ↗
17. S. Shang, C. Zacherl, H. Fang, Y. Wang, Y. Du, and Z. Liu: J. Phys.: Condens. Matter., 2012, vol. 24(50), p. 505403.
18. D. Wen and M.S. Titus: Acta Mater., 2021, vol. 221, p. 117358.10.1016/j.actamat.2021.117358 ↗
19. D. Barba, S. Pedrazzini, A. Vilalta-Clemente, A.J. Wilkinson, M.P. Moody, P.A.J. Bagot, A. Jérusalem, and R.C. Reed: Scripta Mater., 2017, vol. 127, pp. 37–40.10.1016/j.scriptamat.2016.08.029 ↗
20. L. Kovarik, R.R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang, and M.J. Mills: Progress Mater. Sci., 2009, vol. 54, pp. 839–73.10.1016/j.pmatsci.2009.03.010 ↗
21. J.J. Moverare, S. Johansson, and R.C. Reed: Acta Mater., 2009, vol. 57(7), pp. 2266–76.10.1016/j.actamat.2009.01.027 ↗
22. D. Barba, A.J. Egan, Y. Gong, M.J. Mills, and R.C. Reed: in Superalloys 2020, Springer, Cham, 2020, pp. 260–72. https://link.springer.com/chapter/10.1007/978-3-030-51834-9_25.
23. T.M. Smith, T.P. Gabb, K.N. Wertz, J. Stuckner, L.J. Evans, A.J. Egan, and M.J. Mills: in Superalloys 2020, Springer, Cham, 2020, pp. 726–36. https://link.springer.com/chapter/10.1007/978-3-030-51834-9_70.10.1007/978-3-030-51834-9_70 ↗
24. T.M. Smith, B.D. Esser, N. Antolin, A. Carlsson, R.E.A. Williams, A. Wessman, T. Hanlon, H.L. Fraser, W. Windl, D.W. McComb, and M.J. Mills: Nat. Commun., 2016, vol. 7, p. 1343410.1038/ncomms13434 ↗
25. L. Feng, D. Lv, R. Rhein, J. Goiri, M. Titus, A. Van der Ven, T. Pollock, and Y. Wang: Acta Mater., 2018, vol. 161, pp. 99–109.10.1016/j.actamat.2018.09.013 ↗
26. Y. Rao, T. Smith, M. Mills, and M. Ghazisaeidi: Acta Mater., 2018, vol. 148, pp. 173–84.10.1016/j.actamat.2018.01.055 ↗
27. H. Hisazawa, Y. Terada, F. Adziman, D.J. Crudden, D.M. Collins, D.E. Armstrong, and R.C. Reed: Metals, 2017, vol. 7(3), p. 71.10.3390/met7030071 ↗
28. T.M. Smith, R.R. Unocic, H. Deutchman, and M.J. Mills: Mater. High Temp., 2016, vol. 33(33), pp. 1–12.
29. H. Hoeft and P. Schwaab: X-Ray Spectrom., 1988, vol. 17(5), pp. 201–8.10.1002/xrs.1300170509 ↗
30. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26(2), pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
31. Thermotech Ni-based Superalloys Database v8.0. Accessed Jan 2015.
32. J.-B. Le Graverend, J. Cormier, S. Kruch, F. Gallerneau, and J. Mendez: Metall. Mater. Trans. A, 2012, vol. 43(11), pp. 3988–97.10.1007/s11661-012-1207-4 ↗
33. C. Rae and R. Reed: Acta Mater., 2007, vol. 55(3), pp. 1067–81.10.1016/j.actamat.2006.09.026 ↗
34. Z. Zhu, H. Basoalto, N. Warnken, and R.C. Reed: Acta Mater., 2012, vol. 60(12), pp. 4888–900.10.1016/j.actamat.2012.05.023 ↗
35. A. Fick: The London. Edinb. Dublin Philos. Mag. J Sci., 1855, vol. 10, pp. 30–9.10.1080/14786445508641925 ↗
36. G.J. Jones and R.K. Trivedi: J. Appl. Phys., 1971, vol. 42(11), pp. 4299–304.10.1063/1.1659770 ↗
37. C. Atkinson: Proceedings of the Royal Society of London, Springer, Cham, 1981, pp.351–68.