Hot-Working Characteristics and Dynamic Recrystallization Behavior of Hot Isostatically Pressed FGH4096 Superalloy
Source abstract
Abstract
Hot-working characteristics, microstructure evolution, and dynamic recrystallization (DRX) of hot isostatically pressed (HIPed) FGH4096 superalloy compressed at the temperature range of 1040 °C to 1130 °C and strain rate range of 0.01 to 10 s−1 were studied. Based on the flow stress curves obtained by friction–temperature correction, a new constitutive equation has been established to predict the flow stresses under different deformation conditions accurately. Also, the hot working maps under different strains were established to optimize the hot working parameters. Different recrystallization behaviors dominate in different hot working regions, and the DRX behavior is sensitive to deformation temperature rather than strain rate. Both continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX) are activated for HIPed FGH4096 superalloy under low deformation temperature, while the DDRX dominates under high deformation temperature. The adiabatic shear bands, voids, and cracks along grain boundaries are the main factors of flow instability in the instability regions. The optimized hot working window of T = 1080 °C to 1107 °C and ( dot{varepsilon } ) = 10−0.2 to 10−1.3 s−1 was obtained by combining the hot working map and microstructure evolution.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. H.L. Huang, G.Q. Liu, H. Wang, A. Ullah, and B.F. Hu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1075–84.10.1007/s11661-019-05581-7 ↗
2. R. Jiang, L.C. Zhang, W.T. Zhang, Y. Zhang, Y. Chen, J.T. Liu, Y.W. Zhang, and Y.D. Song: Mater. Sci. Eng. A, 2021, vol. 817, p. 141421.10.1016/j.msea.2021.141421 ↗
3. S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649–61.10.1007/s11661-011-1035-y ↗
4. C. Zhang, L.W. Zhang, M.F. Li, W.F. Shen, and S.D. Gu: J. Mater. Res., 2014, vol. 29, pp. 2799–808.10.1557/jmr.2014.349 ↗
5. Z.P. Wan, L.X. Hu, Y. Sun, T. Wang, and Z. Li: J. Alloys Compd., 2018, vol. 769, pp. 367–75.10.1016/j.jallcom.2018.08.010 ↗
6. J. Liu, G. Liu, B. Hu, Y. Song, Z. Qin, and Y. Zhang: Sci. Technol. B, 2006, vol. 13, pp. 319–23.
7. W. Xu, L.W. Zhang, S.D. Gu, and J.L. Zhang: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 66–71.10.1016/S1003-6326(11)61141-2 ↗
8. Y. Ning, Z. Yao, H. Li, H. Guo, Y. Tao, and Y. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 961–6.10.1016/j.msea.2009.09.011 ↗
9. M.J. Zhang, F.G. Li, S.Y. Wang, and C.Y. Liu: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4030–9.10.1016/j.msea.2011.01.118 ↗
10. I. Mejía, G. Altamirano, A. Bedolla-Jacuinde, and J.M. Cabrera: Mater. Sci. Eng. A, 2014, vol. 610, pp. 116–25.10.1016/j.msea.2014.04.105 ↗
11. J.S. Zhang, Y.F. Xia, G.Z. Quan, X. Wang, and J. Zhou: J. Alloys Compd., 2018, vol. 743, pp. 464–78.10.1016/j.jallcom.2018.01.399 ↗
12. S. Gourdet and F. Montheillet: Mater. Sci. Eng. A, 2000, vol. 283, pp. 274–88.10.1016/S0921-5093(00)00733-4 ↗
13. S.V. Mehtonen, L.P. Karjalainen, and D.A. Porter: Mater. Sci. Eng. A, 2013, vol. 571, pp. 1–2.10.1016/j.msea.2013.01.077 ↗
14. J.C. Lee, H.K. Seok, and J.Y. Suh: Acta Mater., 2002, vol. 50, pp. 4005–19.10.1016/S1359-6454(02)00200-8 ↗
15. Y. Liu, Z. Yao, Y. Ning, and Y. Nan: J. Alloys Compd., 2017, vol. 691, pp. 554–63.10.1016/j.jallcom.2016.08.216 ↗
16. S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G. Appa Rao, and U. Borah: Mater. Charact., 2018, vol. 146, pp. 217–36.10.1016/j.matchar.2018.10.008 ↗
17. Y. Ning, Z. Yao, M.W. Fu, and H. Guo: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6968–74.10.1016/j.msea.2010.07.018 ↗
18. H. Wu, M. Liu, Y. Wang, Z. Huang, G. Tan, and L. Yang: J. Mater. Res. Technol., 2020, vol. 9, pp. 5090–104.10.1016/j.jmrt.2020.03.026 ↗
19. S. Mitsche, C. Sommitsch, D. Huber, M. Stockinger, and P. Poelt: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3754–60.10.1016/j.msea.2011.01.044 ↗
20. L. Tan, Y. Li, C. Liu, C. Yang, H. Ding, L. Huang, F. Liu, Z. Qin, and L. Jiang: Mater. Charact., 2018, vol. 140, pp. 30–8.10.1016/j.matchar.2018.03.039 ↗
21. H.Z. Li, L. Yang, Y. Wang, G. Tan, S.C. Qiao, Z.Q. Huang, and M.X. Liu: Mater. Charact., 2020, vol. 163, p. 110285.10.1016/j.matchar.2020.110285 ↗
22. L. Tan, Y. Li, F. Liu, Y. Nie, and L. Jiang: J. Alloys Compd., 2019, vol. 789, pp. 506–17.10.1016/j.jallcom.2019.03.080 ↗
23. P. Zhang, C. Hu, Q. Zhu, C.G. Ding, and H.Y. Qin: Mater. Des., 2015, vol. 65, pp. 1153–60.10.1016/j.matdes.2014.08.045 ↗
24. G. Tan, H.Z. Li, Y. Wang, L. Yang, S.C. Qiao, Z.Q. Huang, and M.X. Liu: Trans. Nonferrous Met. Soc. China, 2020, vol. 30, pp. 2709–23.10.1016/S1003-6326(20)65414-0 ↗
25. Y. Wang, W.Z. Shao, L. Zhen, and X.M. Zhang: Mater. Sci. Eng. A, 2008, vol. 486, pp. 321–32.10.1016/j.msea.2007.09.008 ↗
26. H. Zhang, K. Zhang, Z. Lu, C. Zhao, and X. Yang: Mater. Sci. Eng. A, 2014, vol. 604, pp. 1–8.10.1016/j.msea.2014.03.015 ↗
27. H. Jiang, Q. Zhang, X. Chen, Z. Chen, Z. Jiang, X. Wu, and J. Fan: Acta Mater., 2007, vol. 55, pp. 2219–28.10.1016/j.actamat.2006.10.029 ↗
28. B. Avitzur: Metal Forming Processes and Analysis, McGraw-Hill, New York, 1968, pp. 102–11.
29. R. Ebrahimi and A. Najafizadeh: J. Mater. Process. Technol., 2004, vol. 152, pp. 136–43.10.1016/j.jmatprotec.2004.03.029 ↗
30. C. Zhang, L. Zhang, W. Shen, C. Liu, Y. Xia, and R. Li: Mater. Des., 2016, vol. 90, pp. 804–14.10.1016/j.matdes.2015.11.036 ↗
31. Y.P. Li, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1203–9.10.1007/s11661-009-9811-7 ↗
32. M. Wang, W. Wang, Z. Liu, C. Sun, and L. Qian: Mater. Today Commun., 2018, vol. 14, pp. 188–98.10.1016/j.mtcomm.2018.01.009 ↗
33. H. Jiang, J.X. Dong, M.C. Zhang, L. Zheng, and Z.H. Yao: J. Alloys Compd., 2015, vol. 647, pp. 338–50.10.1016/j.jallcom.2015.05.192 ↗
34. R.L. Goetz and S.L. Semiatin: J. Mater. Eng. Perform., 2001, vol. 10, pp. 710–17.10.1361/105994901770344593 ↗
35. C. Devadas, D. Baragar, G. Ruddle, I.V. Samarasekera, and E.B. Hawbolt: Metall. Trans. A, 1991, vol. 22, pp. 321–33.10.1007/BF02656801 ↗
36. H. Shi, A.J. McLaren, C.M. Sellars, R. Shahani, and R. Bolingbroke: Mater. Sci. Technol., 1997, vol. 13, pp. 210–16.10.1179/mst.1997.13.3.210 ↗
37. J.J. Jonas, C.M. Sellars, and W.J.M. Tegart: Metall. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
38. A. He, G. Xie, H. Zhang, and X. Wang: Mater. Des., 2013, vol. 52, pp. 677–85.10.1016/j.matdes.2013.06.010 ↗
39. S.F. Medina and C.A. Hernandez: Sin. Engl. Lett., 1996, vol. 44, pp. 137–48.
40. C. Shi, W. Mao, and X.G. Chen: Mater. Sci. Eng. A, 2013, vol. 571, pp. 83–91.10.1016/j.msea.2013.01.080 ↗
41. L. Chen, G. Zhao, J. Yu, and W. Zhang: Mater. Des., 2015, vol. 66, pp. 129–36.10.1016/j.matdes.2014.10.045 ↗
42. D. Huang and W. Feng: J. Mater. Eng. Perform., 2019, vol. 28, pp. 2281–91.10.1007/s11665-019-03974-8 ↗
43. Z. Shi, X. Yan, and C. Duan: J. Alloys Compd., 2015, vol. 652, pp. 30–8.10.1016/j.jallcom.2015.08.118 ↗
44. Y.V.R.K. PrasadR, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1983, vol. 15, pp. 1883–92.10.1007/BF02664902 ↗
45. Y.V.R.K. Prasad: J. Mater. Eng. Perform., 2003, vol. 12, pp. 638–45.10.1361/105994903322692420 ↗
46. F. Montheillet, J.J. Jonas, and K.W. Neale: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 232–5.10.1007/BF02647764 ↗
47. Y.V.R.K. Prasad: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 235–6.10.1007/BF02647765 ↗
48. M.C. Somani, K. Muraleedharan, Y.V.R.K. Prasad, and V. Singh: Mater. Sci. Eng. A, 1998, vol. 245, pp. 88–99.10.1016/S0921-5093(97)00698-9 ↗
49. N. Srinivasan and Y.V.R.K. Prasad: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2275–84.10.1007/BF02652327 ↗
50. Y. Liu, Y. Ning, Z. Yao, H. Guo, and Y. Nan: J. Alloys Compd., 2014, vol. 612, pp. 56–63.10.1016/j.jallcom.2014.05.165 ↗
51. Y. Liu, Y. Ning, Y. Nan, H. Liang, Y. Li, and Z. Zhao: J. Alloys Compd., 2015, vol. 633, pp. 505–15.10.1016/j.jallcom.2015.02.010 ↗
52. X. Ma, W. Zeng, K. Wang, Y. Lai, and Y. Zhou: Mater. Sci. Eng. A, 2012, vol. 550, pp. 131–7.10.1016/j.msea.2012.04.045 ↗
53. K. Wang, W. Zeng, Y. Zhao, Y. Lai, and Y. Zhou: J. Mater. Sci., 2010, vol. 45, pp. 5883–91.10.1007/s10853-010-4667-1 ↗
54. B. Fang, G.F. Tian, Z. Ji, M.Y. Wang, C.C. Jia, and S.W. Yang: Int. J. Met. Mater., 2019, vol. 26, pp. 657–63.10.1007/s12613-019-1774-0 ↗
55. S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G.A. Rao, and U. Borah: J. Alloys Compd., 2015, vol. 681, pp. 28–42.10.1016/j.jallcom.2016.04.185 ↗
56. H. Zhang, K. Zhang, H. Zhou, Z. Lu, C. Zhao, and X. Yang: Mater. Des., 2015, vol. 80, pp. 51–62.10.1016/j.matdes.2015.05.004 ↗
57. A. Nicolaÿ, G. Fiorucci, J.M. Franchet, J. Cormier, and N. Bozzolo: Acta Mater., 2019, vol. 174, pp. 406–17.10.1016/j.actamat.2019.05.061 ↗
58. X. Peng, H. Guo, Z. Shi, C. Qin, Z. Zhao, and Z. Yao: Mater. Sci. Eng. A, 2014, vol. 605, pp. 80–8.10.1016/j.msea.2014.03.047 ↗
59. P. Liu, R. Zhang, Y. Yuan, C. Cui, Y. Zhou, and X. Sun: J. Alloys Compd., 2020, vol. 831, p. 154618.10.1016/j.jallcom.2020.154618 ↗
60. J.F. Jiang, G.F. Xiao, Y. Wang, Y.Z. Liu, and Y. Zhang: Trans. Nonferrous Met. Soc. China, 2020, vol. 30, pp. 710–26.10.1016/S1003-6326(20)65248-7 ↗
61. D. Ponge and G. Gottstein: Acta Mater., 1998, vol. 46, pp. 69–80.10.1016/S1359-6454(97)00233-4 ↗
62. S.W. Xu, S. Kamado, N. Matsumoto, T. Honma, and Y. Kojima: Mater. Sci. Eng. A, 2009, vol. 527, pp. 52–60.10.1016/j.msea.2009.08.062 ↗
63. Y.C. Lin, X.Y. Wu, X.M. Chen, J. Chen, D.X. Wen, J.L. Zhang, and L.T. Li: J. Alloys Compd., 2015, vol. 640, pp. 101–13.10.1016/j.jallcom.2015.04.008 ↗
64. H. Zhang, K. Zhang, S. Jiang, H. Zhou, C. Zhao, and X. Yang: J. Alloys Compd., 2015, vol. 623, pp. 374–85.10.1016/j.jallcom.2014.11.056 ↗
65. S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G.A. Rao, and U. Borah: J. Alloys Compd., 2017, vol. 709, pp. 394–409.10.1016/j.jallcom.2017.03.158 ↗
66. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd, Oxford, 2004.
67. Q. Guo, D. Li, S. Guo, H. Peng, and J. Hu: J. Nucl. Mater., 2011, vol. 414, pp. 440–50.10.1016/j.jnucmat.2011.05.029 ↗
68. M. Detrois, S. Antonov, S. Tin, P.D. Jablonski, and J.A. Hawk: Mater. Charact., 2019, vol. 157, p. 109915.10.1016/j.matchar.2019.109915 ↗
69. B. Nithin, K. Chattopadhyay, and G. Phanikumar: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4895–905.10.1007/s11661-018-4795-9 ↗
70. C. Gupta, J.S. Jha, B. Jayabalan, R. Gujrati, A. Alankar, and S. Mishra: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 4714–31.10.1007/s11661-019-05380-0 ↗