journal article·2023-05

RETRACTED ARTICLE: Dynamic Precipitation During Forging of a γ–γ′ Nickel-Based Superalloy

Ilusca Soares Janeiro, Jean-Michel Franchet, Jonathan Cormier, Nathalie Bozzolo

This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Publisher page

Abstract

Hot compression and creep tests under different conditions were performed on a typical γ–γ′ polycrystalline nickel base superalloy below the γ′-phase solvus temperature, to shed light on the mechanisms of γ′ precipitation during deformation and the driving forces behind these mechanisms. Scanning Electron Microscopy (SEM) and image analysis were employed to characterize the different populations of γ′ precipitates and their evolutions. The γ′-phase area fractions observed after hot compression are systematically higher than the fraction prior to deformation within the investigated range of thermomechanical conditions. Two new populations of precipitates formed during deformation are identified and characterized. These are interpreted to result from a dynamic precipitation process, the hypothesis of their formation during the quenching step being very unlikely with regards to their size and amount. The fraction of γ′-phase produced during deformation increases with increasing deformation magnitude, decreasing deformation temperature and for slower strain rates. Finally, a scenario for dynamic γ′ precipitate nucleation and growth is proposed to explain the experimental observations and the influence of dislocation density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. A. Devaux, E. Georges, and P. Héritier: Adv. Mater. Res., 2011, vol. 278, pp. 405–10.10.4028/www.scientific.net/AMR.278.405 ↗
2. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
3. T.M. Pollock and S. Tin: J. Propuls. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
4. E.O. Ezugwu, Z.M. Wang, and A.R. Machado: J. Mater. Process. Technol., 1998, vol. 86, pp. 1–6.10.1016/S0924-0136(98)00314-8 ↗
5. H. Taboada Michel, L. Sasaki Reda, G. Effgen Santos, J. Cormier, C. Dumont, P. Villechaise, P. Bocher, D. Texier, E. Georges, F. Bridier, F. Hamon, and A. Devaux: in Proceedings of the 13th Int. Symp. Superalloys (Superalloys 2016), TMS (The Minerals, Metals & Materials Society), Seven Springs, PA, USA, 2016, pp. 539–48.10.1002/9781119075646.ch58 ↗
6. H. Monajati, M. Jahazi, R. Bahrami, and S. Yue: Mater. Sci. Eng. A, 2004, vol. 373, pp. 286–93.10.1016/j.msea.2004.01.027 ↗
7. A. Devaux, B. Picqué, M.F. Gervais, E. Georges, T. Poulain, and P. Héritier: in Proceedings of the 12th Int. Symp. Superalloys (Superalloys 2012), TMS (The Minerals, Metals & Materials Society), Seven Springs, PA, USA, 2012, pp. 911–19.10.1002/9781118516430.ch100 ↗
8. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗
9. A. Devaux, A. Helstroffer, J. Cormier, P. Villechaise, J. Douin, M. Hantcherli, and F. Pettinari-Sturmel: in Proceedings of the 8th Int. Symp. Superalloy 718 & Deriv., TMS (The Minerals, Metals & Materials Society), Pittsburgh, PA, USA, 2014, pp. 521–35.10.1002/9781119016854.ch41 ↗
10. T. Konkova, S. Rahimi, S. Mironov, and T.N. Baker: Mater. Charact., 2018, vol. 139, pp. 437–45.10.1016/j.matchar.2018.03.027 ↗
11. F. Liu, J. Chen, J. Dong, M. Zhang, and Z. Yao: Mater. Sci. Eng. A, 2016, vol. 651, pp. 102–15.10.1016/j.msea.2015.10.099 ↗
12. Z. Wan, L. Hu, Y. Sun, T. Wang, and Z. Li: Vacuum, 2018, vol. 155, pp. 585–93.10.1016/j.vacuum.2018.06.068 ↗
13. B. Sun, T. Zhang, L. Song, and L. Zhang: J. Mater. Res. Technol., 2022, vol. 18, pp. 1436–49.10.1016/j.jmrt.2022.03.033 ↗
14. A. Coyne-Grell, J. Blaizot, S. Rahimi, I. Violatos, S. Nouveau, C. Dumont, A. Nicolaÿ, and N. Bozzolo: J. Alloys Compd., 2022, vol. 916, 165465.10.1016/j.jallcom.2022.165465 ↗
15. K. Alvarado, I. Janeiro, S. Florez, B. Flipon, J.M. Franchet, D. Locq, C. Dumont, N. Bozzolo, and M. Bernacki: Metals, 2021, vol. 11, pp. 1–30.10.3390/met11121921 ↗
16. S. Katnagallu, S. Vernier, M.A. Charpagne, B. Gault, N. Bozzolo, and P. Kontis: Scr. Mater., 2021, vol. 191, pp. 7–11.10.1016/j.scriptamat.2020.09.012 ↗
17. M.A. Charpagne, T. Billot, J.M. Franchet, and N. Bozzolo: J. Alloys Compd., 2016, vol. 688, pp. 685–94.10.1016/j.jallcom.2016.07.240 ↗
18. M.A. Charpagne, J.M. Franchet, and N. Bozzolo: Mater. Des., 2018, vol. 144, pp. 353–60.10.1016/j.matdes.2018.02.048 ↗
19. M.A. Charpagne, A.T. Polonsky, M.P. Echlin, S. Jacomet, J. de Jaeger, M. De Graef, N. Bozzolo, and T.M. Pollock: Scr. Mater., 2020, vol. 186, pp. 109–13.10.1016/j.scriptamat.2020.05.020 ↗
20. A. Seret, C. Moussa, M. Bernacki, and N. Bozzolo: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4199–213.10.1007/s11661-018-4707-z ↗
21. S. Vernier, J.M. Franchet, C. Dumont, P. Vennéguès, and N. Bozzolo: Scr. Mater., 2018, vol. 153, pp. 10–13.10.1016/j.scriptamat.2018.04.037 ↗
22. S.A. Nalawade, M. Sundararaman, J.B. Singh, A. Verma, and R. Kishore: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2906–09.10.1016/j.msea.2010.01.006 ↗
23. H. Zhang, C. Li, Y. Liu, Q. Guo, Y. Huang, H. Li, and J. Yu: J. Alloys Compd., 2017, vol. 716, pp. 65–72.10.1016/j.jallcom.2017.05.042 ↗
24. K. Hou, M. Wang, P. Zhao, M. Ou, H. Li, Y. Ma, and K. Liu: J. Alloys Compd., 2022, vol. 905, 164187.10.1016/j.jallcom.2022.164187 ↗
25. M.-A. Charpagne, P. Vennéguès, T. Billot, J.-M. Franchet, and N. Bozzolo: J. Microsc., 2016, vol. 263, pp. 106–12.10.1111/jmi.12380 ↗
26. S. Vernier, J.M. Franchet, C. Dumont, and N. Bozzolo: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4308–323.10.1007/s11661-018-4734-9 ↗
27. O.T. Ola, O.A. Ojo, and M.C. Chaturvedi: Mater. Sci. Eng. A, 2013, vol. 585, pp. 319–25.10.1016/j.msea.2013.06.088 ↗
28. M. Soucail and Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. 220, pp. 215–22.10.1016/S0921-5093(97)80011-1 ↗
29. C.M. Heaney, M.L. Lasonde, A.M. Powell, B.J. Bond, and C.M. O’Brien: in 8th International Symposium on Superalloy 718 and Derivatives, TMS (The Minerals, Metals & Materials Society), Pittsburgh, PA, USA, 2014, pp. 67–77.10.7449/2014/Superalloys_2014_67_77 ↗
30. M. Brozovic Gariglio, N. Bozzolo, and D. Pino Muñoz: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4125–36.10.1007/s11661-021-06373-8 ↗
31. A. Hansel and T. Spittel: Kraft- und Arbeitsbedarf bildsamer Formgebungsverfahren, VEB Deutscher Verlag für Grundstoffindustrie, Leipzig, 1978.
32. C. Schwalbe, J. Cormier, C.N. Jones, E. Galindo-Nava, and C.M.F. Rae: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3988–4002.10.1007/s11661-018-4764-3 ↗
33. J. Cormier, M. Jouiad, F. Hamon, P. Villechaise, and X. Milhet: Philos. Mag. Lett., 2010, vol. 90, pp. 611–20.10.1080/09500839.2010.489887 ↗
34. R. Wu, M. Zaiser, and S. Sandfeld: Int. J. Plasticity, 2017, vol. 95, pp. 142–62.10.1016/j.ijplas.2017.04.005 ↗
35. K. Maciejewski and H. Ghonem: Int. J. Fatigue, 2014, vol. 68, pp. 123–35.10.1016/j.ijfatigue.2014.05.011 ↗
36. M. Charpagne: PhD. Thesis, PSL Research University, Sophia-Antipolis, France, 2016, https://pastel.archives-ouvertes.fr/tel-01764932v1.
37. L. Xu, C.G. Tian, C.Y. Cui, Y.F. Gu, and X.F. Sun: Mater. Sci. Technol., 2014, vol. 30, pp. 962–67.10.1179/1743284713Y.0000000381 ↗
38. T. Grosdidier, A. Hazotte, and A. Simon: Mater. Sci. Eng. A, 1998, vol. 256, pp. 183–96.10.1016/S0921-5093(98)00795-3 ↗
39. A. Hazotte and J. Lacaze: Scr. Metall., 1989, vol. 23, pp. 1877–82.10.1016/0036-9748(89)90475-4 ↗
40. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
41. F.-H. An, D.-Q. Zhang, and P. Feng: Steel Res. Int., 2021, vol. 92, p. 2000224.10.1002/srin.202000224 ↗
42. A. Foul, C. Aranas, B. Guo, and J.J. Jonas: Mater. Sci. Eng. A, 2018, vol. 722, pp. 156–59.10.1016/j.msea.2018.02.097 ↗
43. B. Guo, S.L. Semiatin, J.J. Jonas, and S. Yue: J. Mater. Sci., 2018, vol. 53, pp. 9305–315.10.1007/s10853-018-2237-0 ↗
44. X. Ji, B. Guo, F. Jiang, H. Yu, D. Fu, J. Teng, H. Zhang, and J.J. Jonas: J. Mater. Sci. Technol., 2020, vol. 36, pp. 160–66.10.1016/j.jmst.2019.08.005 ↗
45. A. Deschamps, G. Fribourg, Y. Bréchet, J.L. Chemin, and C.R. Hutchinson: Acta Mater., 2012, vol. 60, pp. 1905–916.10.1016/j.actamat.2012.01.002 ↗
46. X.L. Ma, S. Eswarappa Prameela, P. Yi, M. Fernandez, N.M. Krywopusk, L.J. Kecskes, T. Sano, M.L. Falk, and T.P. Weihs: Acta Mater., 2019, vol. 172, pp. 185–99.10.1016/j.actamat.2019.04.046 ↗
47. B. Guo, S.L. Semiatin, and J.J. Jonas: Mater. Sci. Eng. A, 2019, vol. 761, 138047.10.1016/j.msea.2019.138047 ↗
48. T. Seshacharyulu, S.C. Medeiros, W.G. Frazier, and Y.V.R.K. Prasad: Mater. Sci. Eng. A, 2002, vol. 325, pp. 112–25.10.1016/S0921-5093(01)01448-4 ↗
49. B. Guo, S.L. Semiatin, J. Liang, B. Sun, and J.J. Jonas: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1450–54.10.1007/s11661-018-4551-1 ↗
50. J.J. Jonas and C. Ghosh: Acta Mater., 2013, vol. 61, pp. 6125–131.10.1016/j.actamat.2013.06.054 ↗
51. C. Poletti, L. Germain, F. Warchomicka, M. Dikovits, and S. Mitsche: Mater. Sci. Eng. A, 2016, vol. 651, pp. 280–90.10.1016/j.msea.2015.10.109 ↗
52. D.L. OuYang, M.W. Fu, and S.Q. Lu: Mater. Sci. Eng. A, 2015, vol. 619, pp. 26–34.10.1016/j.msea.2014.09.067 ↗
53. N. Matan, D.C. Cox, C.M.F. Rae, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 2031–045.10.1016/S1359-6454(99)00093-2 ↗
54. S.Q. Xiao, P.-J. Wilbrandt, and P. Haasen: Scr. Metall., 1989, vol. 23, pp. 295–300.10.1016/0036-9748(89)90370-0 ↗
55. W.P. Sun, M. Militzer, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 821–30.10.1007/BF02675559 ↗
56. M. Militzer, W.P. Sun, and J.J. Jonas: Acta Metall. Mater., 1994, vol. 42, pp. 133–41.10.1016/0956-7151(94)90056-6 ↗
57. M. Legros, G. Dehm, E. Arzt, and T.J. Balk: Science, 2008, vol. 319, pp. 1646–649.10.1126/science.1151771 ↗
58. A. Pineau: Acta Metall., 1976, vol. 24, pp. 559–64.10.1016/0001-6160(76)90101-2 ↗
59. J.D. Eschelby and Edited by I. N. Sneddon: Process Solid Mech., 1961, vol. 2, pp. 89–140.
60. M. Göken and M. Kempf: Acta Mater., 1999, vol. 47, pp. 1043–052.10.1016/S1359-6454(98)00377-2 ↗
61. J. Chen, J. Dong, M. Zhang, and Z. Yao: Mater. Sci. Eng. A, 2016, vol. 673, pp. 122–34.10.1016/j.msea.2016.07.068 ↗
62. P. Kontis, Z. Li, D.M. Collins, J. Cormier, D. Raabe, and B. Gault: Scr. Mater., 2018, vol. 145, pp. 76–80.10.1016/j.scriptamat.2017.10.005 ↗
63. T. Furuhara, B. Poorganji, H. Abe, and T. Maki: JOM, 2007, vol. 59, pp. 64–67.10.1007/s11837-007-0013-8 ↗
64. C.L. Li, P.L. Narayana, N.S. Reddy, S.W. Choi, J.T. Yeom, J.K. Hong, and C.H. Park: J. Mater. Sci. Technol., 2019, vol. 35, pp. 907–16.10.1016/j.jmst.2018.11.018 ↗
65. K. Farmanesh and A. Najafi-Zadeh: J. Mater. Sci. Technol., 2003, vol. 19, pp. 217–20.
66. M.S. Chen, Z.H. Zou, Y.C. Lin, H.B. Li, G.Q. Wang, and Y.Y. Ma: Mater. Charact., 2019, vol. 151, pp. 445–56.10.1016/j.matchar.2019.03.037 ↗
67. C. Ghosh, C. Aranas, and J.J. Jonas: Prog. Mater. Sci., 2016, vol. 82, pp. 151–233.10.1016/j.pmatsci.2016.04.004 ↗
68. I. Weiss and S.L. Semiatin: Mater. Sci. Eng. A, 1999, vol. 263, pp. 243–56.10.1016/S0921-5093(98)01155-1 ↗
69. S.L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng. A, 1999, vol. 263, pp. 257–71.10.1016/S0921-5093(98)01156-3 ↗
70. S.L. Semiatin and G.D. Lahoti: Metall. Trans. A, 1981, vol. 12A, pp. 1719–728.10.1007/BF02643754 ↗
71. J. Koike, Y. Shimoyama, I. Ohnuma, T. Okamura, R. Kainuma, K. Ishida, and K. Maruyama: Acta Mater., 2000, vol. 48, pp. 2059–069.10.1016/S1359-6454(00)00049-5 ↗
72. H. Oikawa and T. Oomori: Mater. Sci. Eng., 1988, vol. 104, p. 125.10.1016/0025-5416(88)90413-2 ↗
73. S.L. Semiatin and T.R. Bieler: Acta Mater., 2001, vol. 49, pp. 3565–73.10.1016/S1359-6454(01)00236-1 ↗
74. H. Mecking, U.F. Kocks, and C. Hartig: Scr. Mater., 1996, vol. 35, pp. 465–71.10.1016/1359-6462(96)00137-6 ↗
75. C.H. Park, J.H. Kim, Y.T. Hyun, J.T. Yeom, and N.S. Reddy: J. Alloys Compd., 2014, vol. 582, pp. 126–29.10.1016/j.jallcom.2013.08.041 ↗
76. G. Liu, K. Wang, B. He, M. Huang, and S. Yuan: Mater. Des., 2015, vol. 86, pp. 146–51.10.1016/j.matdes.2015.07.100 ↗