Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry
Source abstract
Abstract
Abstract Recent studies revealed the excellent high temperature properties of polycrystalline CoNi-base superalloys. However, their underlying deformation behavior has been reported only scarcely so far. In this work, the deformation mechanisms of four polycrystalline compositionally complex CoNi-base superalloys with slightly varying chemical compositions were investigated by compression and creep experiments at temperatures between 750 °C and 850 °C and strain-rates between 10–3 and 10–8 s−1. In the two (Ta + Ti)-rich alloys, a transition of the deformation mechanism from shearing by APB-coupled dislocation pairs to stacking fault shearing and finally also to microtwinning is observed with decreasing strain-rate and increasing temperature. In contrast, APB-based shearing mechanisms represent the dominant mechanism in both (Al + W)-rich alloys in all conditions. At high temperatures and low strain-rates, dislocation glide-climb processes also contribute to plastic deformation in all alloys. By correlating the underlying defect structures with the mechanical properties of these alloys, it becomes evident that a transition to stacking fault shearing and microtwinning leads to a lower strain-rate dependency and superior high-temperature strength in comparison with APB-based mechanisms. Reasons for the different deformation mechanisms, the influence of segregation processes, the consequences for mechanical properties and implications for a mechanism-based alloy design are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90–91.10.1126/science.1121738 ↗
2. A. Suzuki, G.C. DeNolf, and T.M. Pollock: Scr. Mater., 2007, vol. 56, pp. 385–88.10.1016/j.scriptamat.2006.10.039 ↗
3. A. Suzuki and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
4. A. Bauer, S. Neumeier, F. Pyczak, and M. Göken: Scr. Mater., 2010, vol. 63, pp. 1197–1200.10.1016/j.scriptamat.2010.08.036 ↗
5. S. Meher, H.-Y. Yan, S. Nag, D. Dye, and R. Banerjee: Scr. Mater., 2012, vol. 67, pp. 850–53.10.1016/j.scriptamat.2012.08.006 ↗
6. F. Xue, M. Wang, and Q. Feng: in Superalloys 2012, TMS, Warrendale, 2012, pp. 813–21.10.1002/9781118516430.ch90 ↗
7. L. Klein, Y. Shen, M.S. Killian, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2713–20.10.1016/j.corsci.2011.04.020 ↗
8. L. Klein, M.S. Killian, and S. Virtanen: Corros. Sci., 2013, vol. 69, pp. 43–49.10.1016/j.corsci.2012.09.046 ↗
9. M. Knop, P. Mulvey, F. Ismail, A. Radecka, K.M. Rahman, T.C. Lindley, B.A. Shollock, M.C. Hardy, M.P. Moody, T.L. Martin, P.A.J. Bagot, and D. Dye: JOM, 2014, vol. 66, pp. 2495–2501.10.1007/s11837-014-1175-9 ↗
10. M.S. Titus, A. Suzuki, and T.M. Pollock: Scr. Mater., 2012, vol. 66, pp. 574–77.10.1016/j.scriptamat.2012.01.008 ↗
11. S. Neumeier, L.P. Freund, and M. Göken: Scr. Mater., 2015, vol. 109, pp. 104–07.10.1016/j.scriptamat.2015.07.030 ↗
12. N. Volz, C.H. Zenk, R. Cherukuri, T. Kalfhaus, M. Weiser, S.K. Makineni, C. Betzing, M. Lenz, B. Gault, S.G. Fries, J. Schreuer, R. Vaßen, S. Virtanen, D. Raabe, E. Spiecker, S. Neumeier, and M. Göken: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 4099–109.10.1007/s11661-018-4705-1 ↗
13. M.S. Titus, A. Suzuki, and T.M. Pollock: in Superalloys 2012, TMS, Warrendale, 2012, pp. 823–32.10.1002/9781118516430.ch91 ↗
14. M.S. Titus, L.H. Rettberg, and T.M. Pollock: in Superalloys 2016, M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., John Wiley & Sons, Inc., Hoboken, NJ, 2016, pp. 141–8.
15. A. Bezold, N. Volz, F. Xue, C.H. Zenk, S. Neumeier, and M. Göken: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1567–74.10.1007/s11661-020-05626-2 ↗
16. M. Kolb, C.H. Zenk, A. Kirzinger, I. Povstugar, D. Raabe, S. Neumeier, and M. Göken: J. Mater. Res., 2017, vol. 32, pp. 2551–59.10.1557/jmr.2017.242 ↗
17. M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530–39.10.1016/j.actamat.2014.08.033 ↗
18. F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, and M. Göken: Scr. Mater., 2018, vol. 142, pp. 129–32.10.1016/j.scriptamat.2017.08.039 ↗
19. M. Lenz, Y.M. Eggeler, J. Müller, C.H. Zenk, N. Volz, P. Wollgramm, G. Eggeler, S. Neumeier, M. Göken, and E. Spiecker: Acta Mater., 2019, vol. 166, pp. 597–610.10.1016/j.actamat.2018.12.053 ↗
20. L.P. Freund, S. Giese, D. Schwimmer, H.W. Höppel, S. Neumeier, and M. Göken: J. Mater. Res., 2017, vol. 32, pp. 4475–82.10.1557/jmr.2017.315 ↗
21. Y. Zhang, H. Fu, X. Zhou, Y. Zhang, and J. Xie: Intermetallics, 2019, vol. 112, p. 106543.10.1016/j.intermet.2019.106543 ↗
22. X. Zhuang, S. Lu, L. Li, and Q. Feng: Mater. Sci. Eng. A, 2020, vol. 780, p. 139219.10.1016/j.msea.2020.139219 ↗
23. Z. Fan, C. Wang, C. Zhang, Y. Yu, H. Chen, and Z. Yang: Mater. Sci. Eng. A, 2018, vol. 735, pp. 114–20.10.1016/j.msea.2018.07.106 ↗
24. A. Bezold, N. Volz, M. Lenz, N. Karpstein, C.H. Zenk, E. Spiecker, M. Göken, and S. Neumeier: Acta Mater., 2022, vol. 227, p. 117702.10.1016/j.actamat.2022.117702 ↗
25. Y.M. Eggeler, J. Müller, M.S. Titus, A. Suzuki, T.M. Pollock, and E. Spiecker: Acta Mater., 2016, vol. 113, pp. 335–49.10.1016/j.actamat.2016.03.077 ↗
26. M.S. Titus, A. Mottura, G. Babu Viswanathan, A. Suzuki, M.J. Mills, and T.M. Pollock: Acta Mater., 2015, vol. 89, pp. 423–37.10.1016/j.actamat.2015.01.050 ↗
27. T.M. Smith, R.R. Unocic, H. Deutchman, and M.J. Mills: Mater. High Temp., 2016, vol. 33, pp. 372–83.10.1080/09603409.2016.1180858 ↗
28. D. Barba, S. Pedrazzini, A. Vilalta-Clemente, A.J. Wilkinson, M.P. Moody, P.A.J. Bagot, A. Jérusalem, and R.C. Reed: Scr. Mater., 2017, vol. 127, pp. 37–40.10.1016/j.scriptamat.2016.08.029 ↗
29. D. Barba, E. Alabort, S. Pedrazzini, D.M. Collins, A.J. Wilkinson, P.A.J. Bagot, M.P. Moody, C. Atkinson, A. Jérusalem, and R.C. Reed: Acta Mater., 2017, vol. 135, pp. 314–29.10.1016/j.actamat.2017.05.072 ↗
30. T.M. Smith, B.D. Esser, N. Antolin, G.B. Viswanathan, T. Hanlon, A. Wessman, D. Mourer, W. Windl, D.W. McComb, and M.J. Mills: Acta Mater., 2015, vol. 100, pp. 19–31.10.1016/j.actamat.2015.08.053 ↗
31. T.M. Smith, Y. Rao, Y. Wang, M. Ghazisaeidi, and M.J. Mills: Acta Mater., 2017, vol. 141, pp. 261–72.10.1016/j.actamat.2017.09.027 ↗
32. S.K. Makineni, A. Kumar, M. Lenz, P. Kontis, T. Meiners, C. Zenk, S. Zaefferer, G. Eggeler, S. Neumeier, E. Spiecker, D. Raabe, and B. Gault: Acta Mater., 2018, vol. 155, pp. 362–71.10.1016/j.actamat.2018.05.074 ↗
33. N. Volz, F. Xue, C.H. Zenk, A. Bezold, S. Gabel, A.P.A. Subramanyam, R. Drautz, T. Hammerschmidt, S.K. Makineni, B. Gault, M. Göken, and S. Neumeier: Acta Mater., 2021, vol. 214, p. 117019.10.1016/j.actamat.2021.117019 ↗
34. Y.M. Eggeler, M.S. Titus, A. Suzuki, and T.M. Pollock: Acta Mater., 2014, vol. 77, pp. 352–59.10.1016/j.actamat.2014.04.037 ↗
35. L.P. Freund, O.M.D.M. Messé, J.S. Barnard, M. Göken, S. Neumeier, and C.M.F. Rae: Acta Mater., 2017, vol. 123, pp. 295–304.10.1016/j.actamat.2016.10.048 ↗
36. M. Lenz, M. Wu, and E. Spiecker: Acta Mater., 2020, vol. 191, pp. 270–79.10.1016/j.actamat.2020.03.056 ↗
37. D. Barba, T.M. Smith, J. Miao, M.J. Mills, and R.C. Reed: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 4173–185.10.1007/s11661-018-4567-6 ↗
38. S.K. Makineni, M. Lenz, S. Neumeier, E. Spiecker, D. Raabe, and B. Gault: Scr. Mater., 2018, vol. 157, pp. 62–66.10.1016/j.scriptamat.2018.07.042 ↗
39. M. Lenz, M. Wu, J. He, S.K. Makineni, B. Gault, D. Raabe, S. Neumeier, and E. Spiecker: in Superalloys 2020, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., Springer, Cham, 2020, pp. 920–28.10.1007/978-3-030-51834-9_90 ↗
40. T.M. Smith, B.D. Esser, N. Antolin, A. Carlsson, R.E.A. Williams, A. Wessman, T. Hanlon, H.L. Fraser, W. Windl, D.W. McComb, and M.J. Mills: Nat. Commun., 2016, vol. 7, p. 13434.10.1038/ncomms13434 ↗
41. T.M. Smith, B.S. Good, T.P. Gabb, B.D. Esser, A.J. Egan, L.J. Evans, D.W. McComb, and M.J. Mills: Acta Mater., 2019, vol. 172, pp. 55–65.10.1016/j.actamat.2019.04.038 ↗
42. A.J. Egan, Y. Rao, G.B. Viswanathan, T.M. Smith, M. Ghazisaeidi, S. Tin, and M.J. Mills: in Superalloys 2020, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., Springer, Cham, 2020, pp. 640–50.
43. A. Bezold, N. Volz, M. Lenz, C.H. Zenk, E. Spiecker, M. Mills, M. Göken, and S. Neumeier: Scr. Mater., 2021, vol. 200, p. 113928.10.1016/j.scriptamat.2021.113928 ↗
44. V.A. Vorontsov, T.P. McAuliffe, M.C. Hardy, D. Dye, and I. Bantounas: Acta Mater., 2022, vol. 232, p. 117936.10.1016/j.actamat.2022.117936 ↗
45. M.K. Miller and K.F. Russell: Ultramicroscopy, 2007, vol. 107, pp. 761–66.10.1016/j.ultramic.2007.02.023 ↗
46. F.D. León-Cázares, F. Monni, and C.M.F. Rae: Acta Mater., 2020, vol. 199, pp. 209–24.10.1016/j.actamat.2020.08.032 ↗
47. A. Bezold and S. Neumeier: SSRN J., https://doi.org/10.2139/ssrn.4180430.10.2139/ssrn.4180430 ↗
48. L.P. Freund: Doctoral dissertation, University Erlangen-Nürnberg, 2018.
49. L.P. Freund, A. Stark, F. Pyczak, N. Schell, M. Göken, and S. Neumeier: J. Alloy. Compd., 2018, vol. 753, pp. 333–42.10.1016/j.jallcom.2018.04.204 ↗
50. S.C.H. Llewelyn, K.A. Christofidou, V.J. Araullo-Peters, N.G. Jones, M.C. Hardy, E.A. Marquis, and H.J. Stone: Acta Mater., 2017, vol. 131, pp. 296–304.10.1016/j.actamat.2017.03.067 ↗
51. C.H. Zenk, N. Volz, C. Zenk, P.J. Felfer, and S. Neumeier: Crystals, 2020, vol. 10, p. 1058.10.3390/cryst10111058 ↗
52. G.B. Viswanathan, P.M. Sarosi, M.F. Henry, D.D. Whitis, W.W. Milligan, and M.J. Mills: Acta Mater., 2005, vol. 53, pp. 3041–057.10.1016/j.actamat.2005.03.017 ↗
53. R.R. Unocic, G.B. Viswanathan, P.M. Sarosi, S. Karthikeyan, J. Li, and M.J. Mills: Mater. Sci. Eng., A, 2008, vol. 483–484, pp. 25–32.10.1016/j.msea.2006.08.148 ↗
54. D.J. Crudden, A. Mottura, N. Warnken, B. Raeisinia, and R.C. Reed: Acta Mater., 2014, vol. 75, pp. 356–70.10.1016/j.actamat.2014.04.075 ↗
55. T. Kruml, E. Conforto, B. Lo Piccolo, D. Caillard, and J.L. Martin: Acta Materialia, 2002, vol. 50, pp. 5091–5101.10.1016/S1359-6454(02)00364-6 ↗
56. M. Dodaran, A.H. Ettefagh, S.M. Guo, M.M. Khonsari, W.J. Meng, N. Shamsaei, and S. Shao: Intermetallics, 2020, vol. 117, p. 106670.10.1016/j.intermet.2019.106670 ↗
57. K. Vamsi and S. Karthikeyan: in Superalloys 2012 (Twelfth International Symposium), John Wiley & Sons, Inc., 2012, pp. 521–30.10.1002/9781118516430.ch57 ↗
58. A. Breidi, J. Allen, and A. Mottura: Acta Mater., 2018, vol. 145, pp. 97–108.10.1016/j.actamat.2017.11.042 ↗
59. A. Mottura, A. Janotti, and T.M. Pollock: Intermetallics, 2012, vol. 28, pp. 138–43.10.1016/j.intermet.2012.04.020 ↗
60. L. Feng, D. Lv, R.K. Rhein, J.G. Goiri, M.S. Titus, A. Van der Ven, T.M. Pollock, and Y. Wang: Acta Mater., 2018, vol. 161, pp. 99–109.10.1016/j.actamat.2018.09.013 ↗