journal article·2023-02Open access

The Role of Microstructure Morphology on Fracture Mechanisms of Continuously Cooled Bainitic Steel Designed for Rails Application

Aleksandra Królicka, Grzegorz Lesiuk, Roman Kuziak, Krzysztof Radwański, Aleksandra Janik

Abstract

Abstract The low-carbon bainitic steel after a continuous cooling process was subjected to fracture toughness investigations using the J-integral approach. The research was focused on the determination of microstructural factors influencing the fracture processes considering the crystallographic units, as well as dimensions and morphology of phases. It was found that the fracture surface is characterized by complex fracture mechanisms (quasi-cleavage, transcrystalline cleavage–ductile, and ductile mode). It was found that the main features influencing the cracking processes are bainitic ferrite packets and prior austenite grain boundaries. The changes in the crack path were also related to the changes in the misorientation angles, and it was found that changes in the crack path direction occur mainly for the bainitic ferrite packets (HABs). Also, the fracture process zone induced by the crack tip was identified. At a distance of about 4 to 5 µm from the fracture, the retained blocky austenite transformed into martensite was observed. Due to the high carbon content in the retained austenite, the transformed martensite was brittle and was the site of microcracks nucleation. Another origin of microcracks nucleation were M/A constituents occurred in the initial microstructure. In the crack tip area, the reduced dislocation density in the bainitic ferrite, which was caused by the formation of sub-grains, was also determined. Finally, the prospective improvement of the fracture toughness of bainitic steels was determined.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. A. Kumar, S.K. Makineni, A. Dutta, C. Goulas, M. Steenbergen, R.H. Petrov, and J. Sietsma: Mater. Sci. Eng. A, 2019, vol. 759, pp. 210–13.10.1016/j.msea.2019.05.043 ↗
2. M.N. Georgiev and T.V. Simeonova: Met. Sci. Heat Treat., 2018, vol. 60, pp. 464–70.10.1007/s11041-018-0302-6 ↗
3. O. Hajizad, A. Kumar, Z. Li, R.H. Petrov, J. Sietsma, and R. Dollevoet: Metals (Basel), 2019, vol. 9, p. 778.10.3390/met9070778 ↗
4. K. Sawley and J. Kristan: Fatigue Fract. Eng. Mater. Struct., 2003, vol. 26, pp. 1019–29.10.1046/j.1460-2695.2003.00671.x ↗
5. H.A. Aglan, Z.Y. Liu, M.F. Hassan, and M. Fateh: J. Mater. Process. Technol., 2004, vol. 151, pp. 268–74.10.1016/j.jmatprotec.2004.04.073 ↗
6. H. Aglan, M. Hassan, Z. Liu, M. Bhuyan, and M. Fateh: J. Mater. Sci., 2004, vol. 39, pp. 4305–07.10.1023/B:JMSC.0000033413.08154.6d ↗
7. S.M. Hasan, D. Chakrabarti, and S.B. Singh: Wear, 2018, vol. 408–409, pp. 151–59.10.1016/j.wear.2018.05.006 ↗
8. F.H. Çakir and O.N. Çelik: Met. Sci. Heat Treat., 2017, vol. 59, pp. 289–93.10.1007/s11041-017-0144-7 ↗
9. B. Gao, Z. Tan, Y. Tian, Y. Liu, R. Wang, G. Gao, J. Wang, and M. Zhang: Steel Res. Int., 2021, p. 2100494.10.1002/srin.202100494 ↗
10. S.M. Hasan, M. Ghosh, D. Chakrabarti, and S.B. Singh: Mater. Sci. Eng. A, 2020, vol. 771, p. 138590.10.1016/j.msea.2019.138590 ↗
11. B. Adamczyk-Cieślak, M. Koralnik, R. Kuziak, T. Brynk, T. Zygmunt, and J. Mizera: Mater. Sci. Eng. A, 2019, vol. 747, pp. 144–53.10.1016/j.msea.2019.01.043 ↗
12. B. Adamczyk-Cieślak, M. Koralnik, R. Kuziak, K. Majchrowicz, and J. Mizera: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 5429–42.10.1007/s11661-021-06480-6 ↗
13. O. Hajizad, A. Kumar, R.H. Petrov, J. Sietsma, R. Dollevoet, and Z. Li: Comput. Mater. Sci., 2022, vol. 202, p. 110965.10.1016/j.commatsci.2021.110965 ↗
14. S. Das and A. Haldar: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1844–54.10.1007/s11661-013-2173-1 ↗
15. M. Shah, S.K. Das, and S.G. Chowdhury: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2092–102.10.1007/s11661-019-05177-1 ↗
16. A. Królicka, G. Lesiuk, K. Radwański, R. Kuziak, A. Janik, R. Mech, and T. Zygmunt: Int. J. Fatigue, 2021, vol. 149, p. 106280.10.1016/j.ijfatigue.2021.106280 ↗
17. B. Adamczyk-Cieślak, M. Koralnik, R. Kuziak, K. Majchrowicz, T. Zygmunt, and J. Mizera: J. Mater. Eng. Perform., 2021, https://doi.org/10.1007/s11665-021-06547-w.10.1007/s11665-021-06547-w ↗
18. H. Terasaki and Y. Komizo: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2683–89.10.1007/s11661-013-1610-5 ↗
19. H. Terasaki, Y. Shintome, Y. Komizo, M. Ohata, K. Moriguchi, and Y. Tomio: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2035–39.10.1007/s11661-015-2817-4 ↗
20. Y. Huang, A. Zhao, J. He, X. Wang, Z. Wang, and L. Qi: Int. J. Miner. Metall. Mater., 2013, vol. 20, pp. 1155–63.10.1007/s12613-013-0849-6 ↗
21. K. Radwański: Arch. Civ. Mech. Eng., 2016, vol. 16, pp. 282–93.10.1016/j.acme.2015.12.001 ↗
22. T. Furuhara, H. Kawata, S. Morito, and T. Maki: Mater. Sci. Eng. A, 2006, vol. 431, pp. 228–36.10.1016/j.msea.2006.06.032 ↗
23. F.G. Caballero, H. Roelofs, S. Hasler, C. Capdevila, J. Chao, J. Cornide, and C. Garcia-Mateo: Mater. Sci. Technol., 2012, vol. 28, pp. 95–102.10.1179/1743284710Y.0000000047 ↗
24. S.B. Zhou, F. Hu, W. Zhou, L. Cheng, C.Y. Hu, and K.M. Wu: J. Mater. Res. Technol., 2021, vol. 14, pp. 1021–34.10.1016/j.jmrt.2021.07.011 ↗
25. X.Z. Zhang and J.F. Knott: Acta Mater., 1999, vol. 47, pp. 3483–95.10.1016/S1359-6454(99)00200-1 ↗
26. P. Zhao, B. Zhang, C. Cheng, R.D.K. Misra, G. Gao, B. Bai, and Y. Weng: Mater. Sci. Eng. A, 2015, vol. 645, pp. 116–21.10.1016/j.msea.2015.07.095 ↗
27. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425–33.10.1016/j.actamat.2014.05.055 ↗
28. P. Zhao, G. Gao, R.D.K. Misra, and B. Bai: Mater. Sci. Eng. A, 2015, vol. 630, pp. 1–7.10.1016/j.msea.2015.02.015 ↗
29. X. Gui, K. Wang, G. Gao, R.D.K. Misra, Z. Tan, and B. Bai: Mater. Sci. Eng. A, 2016, vol. 657, pp. 82–85.10.1016/j.msea.2016.01.052 ↗
30. J.P. Liu, Y.Q. Li, J. Jin, Y.H. Zhang, F.S. Liu, R. Su, B. Narayanaswamy, and Q.Y. Zhou: Mater. Today Commun., 2020, vol. 25, p. 101531.10.1016/j.mtcomm.2020.101531 ↗
31. V.T.T. Miihkinen and D.V. Edmonds: Mater. Sci. Technol., 1987, vol. 3, pp. 441–49.10.1179/mst.1987.3.6.441 ↗
32. B. Guo, L. Fan, Q. Wang, Z. Fu, Q. Wang, and F. Zhang: Metals (Basel), 2016, vol. 6, p. 256.10.3390/met6110256 ↗
33. B.B. Wu, X.L. Wang, Z.Q. Wang, J.X. Zhao, Y.H. Jin, C.S. Wang, C.J. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2019, vol. 745, pp. 126–36.10.1016/j.msea.2018.12.057 ↗
34. B. Chhajed, K. Mishra, K. Singh, and A. Singh: Mater. Charact., 2022, vol. 192, p. 112214.10.1016/j.matchar.2022.112214 ↗
35. L. Morales-Rivas, A. Azadi, and E. Kerscher: Int. J. Fatigue, 2023, vol. 166, p. 107219.10.1016/j.ijfatigue.2022.107219 ↗
36. R. Kuziak: Hybrid Technology of the Production of Standard Gauge Rails Characterised by Enhanced Durability in Service, Accounting for the Future Trends. Final Report., 2018.
37. F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, and P. Brown: Mater. Sci. Technol., 2001, vol. 17, pp. 512–16.10.1179/026708301101510348 ↗
38. H.K.D.H. Bhadeshia: Proc. R. Soc. A, 2010, vol. 466, pp. 3–18.10.1098/rspa.2009.0407 ↗
39. A. Królicka, K. Radwański, R. Kuziak, T. Zygmunt, and A. Ambroziak: J. Constr. Steel Res., 2020, vol. 175, p. 106372.10.1016/j.jcsr.2020.106372 ↗
40. A. Królicka, A. Żak, R. Kuziak, K. Radwański, and A. Ambroziak: Mater. Sci., 2021, vol. 39, pp. 615–25.
41. ASTM International, West Conshohocken, PA, 2018.
42. A. Khorsand Zak, W.H. Abd. Majid, M.E. Abrishami, and R. Yousefi: Solid State Sci., 2011, vol. 13, pp. 251–56.10.1016/j.solidstatesciences.2010.11.024 ↗
43. G.K. Williamson and R.E. Smallman: Philos. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
44. P. Thirathipviwat, G. Song, J. Bednarcik, U. Kühn, T. Gemming, K. Nielsch, and J. Han: Prog. Nat. Sci. Mater. Int., 2020, vol. 30, pp. 545–51.10.1016/j.pnsc.2020.07.002 ↗
45. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
46. A. Małachowska, P. Sokołowski, G. Paczkowski, T. Lampke, and A. Sajbura: J. Therm. Spray Technol., 2022, vol. 31, pp. 1330–41.10.1007/s11666-022-01355-7 ↗
47. P.I. Christodoulou, A.T. Kermanidis, and G.N. Haidemenopoulos: Theor. Appl. Fract. Mech., 2016, vol. 83, pp. 51–59.10.1016/j.tafmec.2015.12.017 ↗
48. H.A. Aglan: Fatigue Crack Growth and Fracture Behavior of Bainitic Rail Steels, DOT/FRA/ORD-11/17, 2011, Washington, 2011.
49. U.P. Singh, B. Roy, S. Jha, and S.K. Bhattacharyya: Mater. Sci. Technol., 2001, vol. 17, pp. 33–38.10.1179/026708301101509098 ↗
50. Progr. MAP_STEEL_MUCG83, https://www.phase-trans.msm.cam.ac.uk/map/steel/programs/mucg83.html.
51. H.K.D.H. Bhadeshia: Bainite in Steels. Theory and Practice, 3rd ed. CRC Press, Taylor & Francis Group, Boca Raton, 2015.
52. F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251–57.10.1016/j.cossms.2004.09.005 ↗
53. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. 378, pp. 34–39.10.1016/j.msea.2003.10.328 ↗
54. C. Capdevila, F.G. Caballero, and C.G. de Andrés: ISIJ Int., 2002, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
55. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
56. K. Shi, H. Hou, J.-B. Chen, L.-T. Kong, H.-Q. Zhang, and J.-F. Li: Steel Res. Int., 2016, vol. 87, pp. 165–72.10.1002/srin.201400596 ↗
57. Y. Wang, Q. Wang, L. Liu, and W. Xu: Mech. Adv. Mater. Struct., 2015, vol. 22, pp. 591–96.10.1080/15376494.2013.828808 ↗
58. T. Tagawa, T. Kawabata, T. Sakimoto, Y. Kayamori, M. Ohata, Y. Yamashita, E. Tamura, H. Yoshinari, S. Aihara, F. Minami, H. Mimura, and Y. Hagihara: Eng. Fract. Mech., 2014, vol. 128, pp. 157–70.10.1016/j.engfracmech.2014.07.012 ↗
59. A. Królicka, A. Janik, A. Żak, and K. Radwański: Mater. Sci., 2021, vol. 39, pp. 188–99.
60. J.R. Rice and G.F. Rosengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1–2.10.1016/0022-5096(68)90013-6 ↗
61. C.F. Shih: J. Mech. Phys. Solids, 1981, vol. 29, pp. 305–26.10.1016/0022-5096(81)90003-X ↗
62. G. Lacroix, T. Pardoen, and P.J. Jacques: Acta Mater., 2008, vol. 56, pp. 3900–13.10.1016/j.actamat.2008.04.035 ↗
63. P. Jacques: Acta Mater., 2001, vol. 49, pp. 139–52.10.1016/S1359-6454(00)00215-9 ↗
64. C. Garcia-Mateo, F.G. Caballero, M.K. Miller, and J.A. Jimenez: J. Mater. Sci., 2012, vol. 47, pp. 1004–10.10.1007/s10853-011-5880-2 ↗
65. A. Królicka, A.M. Żak, and F.G. Caballero: Mater. Des., 2021, vol. 211, p. 110143.10.1016/j.matdes.2021.110143 ↗
66. C. Garcia-Mateo, J.A. Jimenez, B. Lopez-Ezquerra, R. Rementeria, L. Morales-Rivas, M. Kuntz, and F.G. Caballero: Mater. Charact., 2016, vol. 122, pp. 83–89.10.1016/j.matchar.2016.10.023 ↗
67. J. Fellows: Metals Handbook, Fractography and Atlas of Fractogrphs, 8th ed. American Society for Metals, Ohio, 1974.
68. L. Cho, P.E. Bradley, D.S. Lauria, M.L. Martin, M.J. Connolly, J.T. Benzing, E.J. Seo, K.O. Findley, J.G. Speer, and A.J. Slifka: Acta Mater., 2021, vol. 206, p. 116635.10.1016/j.actamat.2021.116635 ↗
69. K.F. Rodríguez-Galeano, R. Rodríguez-Baracaldo, A. Mestra-Rodríguez, J.M. Cabrera-Marrero, and J.J. Olaya-Florez: Theor. Appl. Fract. Mech., 2016, vol. 86, pp. 351–60.10.1016/j.tafmec.2016.09.010 ↗
70. L. Morales-Rivas: Metals (Basel), 2022, vol. 12, p. 195.10.3390/met12020195 ↗