The Isothermal Oxidation of a New Polycrystalline Turbine Disk Ni-Based Superalloy at 800 °C and Its Modification with Pre-oxidation
Source abstract
Abstract
Abstract Ni-based superalloys with enhanced oxidation resistance at high temperatures are crucial for next-generation gas turbine engines. A new polycrystalline Ni-based superalloy (C19) that combines improved microstructural stability with environmental resistance has been developed. Its oxidation resistance has been determined through measurements of the specific mass change and morphological evolution of the formed oxides following furnace exposures at 800 °C in air for up to 1000 hours; the results of which were benchmarked against Nimonic 105. C19 showed hybrid Type II/Type III behavior as a marginal Al2O3former and performed similarly to established superalloys at 750 °C. The Wagner model for the transition from internal to external oxide formation predicted that C19 should form a continuous Al2O3scale at higher temperatures. A pre-oxidation treatment at 1100 °C for 1 hour was, therefore, selected and shown to dramatically improve the oxidation resistance during subsequent exposure at 800 °C. Oxide cross-sectional analysis showed that C19 formed a continuous and protective Al2O3scale after the pre-oxidation treatment, whereas Nimonic 105 retained discontinuous Al2O3finger-like intrusions beneath a Cr2O3overscale.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. C. Giggins and F. Pettit: J. Electrochem. Soc., 1971, vol. 118, pp. 1782–90.10.1149/1.2407837 ↗
2. B.W. Lagow: JOM, 2016, vol. 68, pp. 2770–75.10.1007/s11837-016-2071-2 ↗
3. T. Sand, J. Liske, T. Helander, J.E. Svensson, and L.G. Johannson: Oxid. Met., 2022, vol. 98, pp. 163–78.10.1007/s11085-022-10117-3 ↗
4. B. Jönsson and A. Westerlund: Oxid. Met., 2017, vol. 88, pp. 315–26.10.1007/s11085-016-9710-4 ↗
5. J.H. Chen, P.M. Rogers, and J.A. Little: Oxid. Met., 1997, vol. 47, pp. 381–410.10.1007/BF02134783 ↗
6. A. Chyrkin, P. Huczkowski, V. Shemet, L. Singheiser, and W.J. Quadakkers: Oxid. Met., 2011, vol. 75, pp. 143–66.10.1007/s11085-010-9225-3 ↗
7. K.A. Christofidou, N.G. Jones, M.C. Hardy, and H.J. Stone: Oxid. Met., 2016, vol. 85, pp. 443–58.10.1007/s11085-015-9606-8 ↗
8. S. Cruchley, M.P. Taylor, H.E. Evans, M.C. Hardy, and D.J. Child: Mater. Sci. Technol., 2014, vol. 30, pp. 1884–89.10.1179/1743284714Y.0000000541 ↗
9. F. Ismail, V. Vorontsov, T. Lindley, M. Hardy, D. Dye, and B. Shollock: Corros. Sci., 2017, vol. 116, pp. 44–52.10.1016/j.corsci.2016.12.009 ↗
10. F. Gesmundo: Mater. Sci. Forum, 1997, vol. 251–254, pp. 3–18.10.4028/www.scientific.net/MSF.251-254.3 ↗
11. T. Perez, D. Monceau, and C. Desgranges: Corros. Sci., 2022, vol. 206, pp. 1–3.10.1016/j.corsci.2022.110485 ↗
12. L.S. Darken: Trans. Am. Inst. Min. Metall. Pet. Eng., 1942, vol. 150, pp. 157–69.
13. C. Wagner: Z. Elektrochem., 1958, vol. 63, pp. 772–82.
14. R.A. Rapp: Acta Metall., 1961, vol. 9, pp. 730–41.10.1016/0001-6160(61)90103-1 ↗
15. J.A. Nesbitt: J. Electrochem. Soc., 1989, vol. 136, pp. 1518–527.10.1149/1.2096954 ↗
16. F. Abe, H. Kutsumi, H. Haruyama, and H. Okubo: Corros. Sci., 2017, vol. 114, pp. 1–9.10.1016/j.corsci.2016.10.008 ↗
17. D. Li, J. Chen, I.P. Etim, Y. Liu, C. Wu, J. Wang, and X. Su: Vacuum, 2021, vol. 194, 110582.10.1016/j.vacuum.2021.110582 ↗
18. S. Mathieu, L. Aranda, L. Portebois, S. Mathieu, and M. Vilasi: Oxid. Met., 2018, vol. 90, pp. 43–63.10.1007/s11085-017-9822-5 ↗
19. M.C. Hardy, K. Christofidou, P.M. Mignanelli, H.J. Stone, N.G. Jones, and C. Argyrakis: Patent No. US 2019/0360077, November 28, 2019.
20. M.C. Hardy, K. Christofidou, P.M. Mignanelli, H.J. Stone, N.G. Jones, and C. Argyrakis: Patent No. US 2019/0360078, November 28, 2019.
21. K. Kawagishi, A. Sato, T. Kobayashi, and H. Harada: J. Jpn. Inst. Met., 2007, vol. 71, pp. 313–19.10.2320/jinstmet.71.313 ↗
22. A. Akhtar, M.S. Hook, and R.C. Reed: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3001–17.10.1007/s11661-005-0073-8 ↗
23. M. Bensch, A. Sato, N. Warnken, E. Affeldt, R.C. Reed, and U. Glatzel: Acta Mater., 2012, vol. 60, pp. 5468–80.10.1016/j.actamat.2012.06.036 ↗
24. A. Sato, J.J. Moverare, M. Hasselqvist, and R.C. Reed: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2302–15.10.1007/s11661-011-0995-2 ↗
25. J.J. Schirra, R.H. Caless, and R.W. Hatala: International Symposium on Superalloys 718, 625 Various Derivatives, 1991, pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
26. J.D. Donaldson and S.J. Clark: Cobalt in Superalloys, Strobel and Sons, London, 1985.
27. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
28. D.J. Young: High Temperature Oxidation and Corrosion of Metals, 1st ed. Elsevier, Amsterdam, 2008.
29. J.W. Park and C.J. Altstetter: Metall. Mater. Trans. A, 1987, vol. 18A, pp. 43–50.10.1007/BF02646220 ↗
30. H.W. Allison and H. Samelson: J. Appl. Phys. (Melville, NY, U. S.), 1959, vol. 30, pp. 1419–24.
31. F.S. Pettit: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1296–305.
32. W. Zhao, Y. Kang, J.M.A. Orozco, and B. Gleeson: Oxid. Met., 2014, vol. 83, pp. 187–201.10.1007/s11085-014-9516-1 ↗
33. J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
34. M.P. Taylor, H.E. Evans, S. Stekovic, and M.C. Hardy: Mater. High Temp., 2014, vol. 29, pp. 145–50.10.3184/096034012X13341417107382 ↗
35. J.B. Johnson, J.R. Nicholls, R.C. Hurst, and P. Hancock: Corros. Sci., 1978, vol. 18, pp. 527–41.10.1016/S0010-938X(78)80027-4 ↗
36. A. Encinas-Oropesa, G.L. Drew, M.C. Hardy, A.J. Leggett, J.R. Nicholls, and N.J. Simms: 11th International Symposium on Superalloys, 2008, pp. 609–18.10.7449/2008/Superalloys_2008_609_618 ↗
37. C.A. Barrett, R.V. Miner, and D.R. Hull: Oxid. Met., 1983, vol. 20, pp. 255–78.10.1007/BF00656844 ↗
38. C.A. Barrett: Report No. 87297, NASA, March 1986.
39. S. Pedrazzini, D. Child, G. West, S. Doak, M. Hardy, M. Moody, and P. Bagot: Scr. Mater., 2016, vol. 113, pp. 51–4.10.1016/j.scriptamat.2015.10.001 ↗
40. E. Anzini, N. Glaenzer, P.M. Mignanelli, M.C. Hardy, H.J. Stone, and S. Pedrazzini: Corros. Sci., 2020, vol. 176, 109042.10.1016/j.corsci.2020.109042 ↗
41. D. Douglass and J. Armijo: Oxid. Met., 1970, vol. 2, pp. 207–31.10.1007/BF00603657 ↗
42. S.J. Park, S.M. Seo, Y.S. Yoo, H.W. Jeong, and H.J. Jang: Materials, 2019, vol. 12, p. 2934.10.3390/ma12182934 ↗
43. A. Encinas-Oropesa, N.J. Simms, J.R. Nicholls, G.L. Drew, J. Leggett, and M.C. Hardy: Mater. High Temp., 2009, vol. 26, pp. 241–49.10.3184/096034009X465202 ↗
44. X.G. Zheng and D.J. Young: Oxid. Met., 1994, vol. 42, pp. 163–89.10.1007/BF01052021 ↗
45. H.T. Pang, F. Li, S. Pahlavanyali, I.M. Edmonds, G. Brewster, and C.M.F. Rae: 13th International Symposium on Superalloys, 2016, pp. 949–58.10.1002/9781119075646.ch101 ↗
46. R.H. Perry: Perry’s Chemical Engineers’ Handbook, 7th ed. McGraw-Hill, New York, 1997.
47. S.R. Hegde: Master of Applied Science Thesis, University of British Columbia, Vancouver, 2005.