Step-by-Step Observation of Secondary-Phase Evolution During the Casting Cracking Process in Mg–Ce–Al Alloys
Source abstract
Abstract
Secondary phases are key factors affecting cracking behavior during casting, but it is still unclear how exactly cracks form. The cracking susceptibility of die-cast Mg–Ce–Al series alloys, which are used in heat-dissipating components in the communication industry, varies greatly with the evolution of the secondary phase. In this paper, a high-temperature tensile test was employed to simulate the tensile behavior during the casting cracking process according to the load–temperature–cooling rate–time curves, to study the effects of secondary-phase evolution on crack nucleation and propagation step by step. Based on the Mg–Ce–Al alloy system, three alloys with the same secondary-phase fraction (~ 7 pct) were designed using the Pandat software: Mg–3.0Ce (Mg12Ce), Mg–7.5Al (Mg17Al12), and Mg–9Ce–6.5Al (Al11Ce3 + Al2Ce). The high-temperature tensile test results showed that Mg12Ce was relatively brittle and cracks easily nucleated with it; Mg17Al12 easily dissolved and then promoted crack nucleation and propagation. In addition, cracks also propagated along the weak Mg12Ce/Mg and Mg17Al12/Mg interfaces. The bulk Al2Ce particles easily cracked or detached from the α-Mg matrix to induce crack nucleation. Fortunately, the fine and dispersed Al11Ce3 significantly improved the high-temperature mechanical properties to help resist cracking and did not induce crack nucleation or propagation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. X. Peng, W.C. Liu, G.H. Wu, H. Ji, and W.J. Ding: J. Mater. Sci. Technol., 2022, vol. 99, pp. 193–206.10.1016/j.jmst.2021.04.072 ↗
2. Y. Yang, X.M. Xiong, J. Chen, X.D. Peng, D.L. Chen, and F.S. Pan: J. Magnes. Alloys, 2021, vol. 9(3), pp. 705–47.10.1016/j.jma.2021.04.001 ↗
3. J.F. Song, J. She, D.L. Chen, and F.S. Pan: J. Magnes. Alloys, 2020, vol. 8(1), pp. 1–41.10.1016/j.jma.2020.02.003 ↗
4. T.C. Xu, Y. Yang, X.D. Peng, J.F. Song, and F.S. Pan: J. Magnes. Alloys, 2019, vol. 7(3), pp. 536–44.10.1016/j.jma.2019.08.001 ↗
5. Z.Y. Zhao, R.G. Guan, Y.F. Shen, and P.K. Bai: J. Mater. Sci. Technol., 2021, vol. 91, pp. 251–61.10.1016/j.jmst.2021.02.052 ↗
6. H. Zhang, Y.X. Li, Y.X. Liu, Q.C. Zhu, X.X. Qi, G.M. Zhu, J.H. Wang, P.P. Jin, and X.Q. Zeng: J. Mater. Sci. Technol., 2021, vol. 81, pp. 212–18.10.1016/j.jmst.2020.11.062 ↗
7. A.A. Luo: J. Magnes. Alloys, 2013, vol. 1, pp. 2–2.10.1016/j.jma.2013.02.002 ↗
8. Y.K. Li, M. Zha, J. Rong, H.L. Jia, Z.Z. Jin, H.M. Zhang, P.K. Ma, H. Xu, T.T. Feng, and H.Y. Wang: J. Mater. Sci. Technol., 2021, vol. 88, pp. 215–25.10.1016/j.jmst.2021.01.050 ↗
9. B. Hu, D.J. Li, J.Y. Wang, Z.X. Li, X.Y. Wang, and X.Q. Zeng: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6658–69.10.1007/s11661-020-06046-y ↗
10. B. Hu, W.J. Zhu, Z.X. Li, S.B. Lee, D.J. Li, X.Q. Zeng, and Y.S. Choi: J. Magnes. Alloy., 2021, https://doi.org/10.1016/j.jma.2021.08.031.10.1016/j.jma.2021.08.031 ↗
11. C.Y. Su, D.J. Li, J. Wang, R.H. Shi, A.A. Luo, X.Q. Zeng, Z.H. Lin, and J. Chen: Mater. Sci. Eng. A, 2020, vol. 773, p. 138870.10.1016/j.msea.2019.138870 ↗
12. T. Zhu, P.H. Fu, L.M. Peng, X. Hu, S. Zhu, and W.J. Ding: J. Magnes. Alloys, 2014, vol. 2, pp. 27–35.10.1016/j.jma.2014.01.003 ↗
13. C.J. Yan, Y.C. Xin, C. Wang, H. Liu, and Q. Liu: J. Mater. Sci. Technol., 2020, vol. 52, pp. 89–99.10.1016/j.jmst.2020.04.021 ↗
14. G.H. Wu, C.L. Wang, M. Sun, and W.J. Ding: J. Magnes. Alloys, 2021, vol. 9(1), pp. 1–20.10.1016/j.jma.2020.06.021 ↗
15. Z.Z. Shi, H.T. Chen, K. Zhang, F.Z. Dai, and X.F. Liu: J. Magnes. Alloys, 2021, vol. 9(2), pp. 416–31.10.1016/j.jma.2020.06.013 ↗
16. J.S. Suh, B.C. Suh, S.E. Lee, J.H. Bae, and B.G. Moon: J. Mater. Sci. Technol., 2022, vol. 107, pp. 52–63.10.1016/j.jmst.2021.07.045 ↗
17. X.Y. Wang, Y.F. Wang, C. Wang, S. Xu, J. Rong, Z.Z. Yang, J.G. Wang, and H.Y. Wang: J. Mater. Sci. Technol., 2020, vol. 49, pp. 117–25.10.1016/j.jmst.2019.04.048 ↗
18. T.L. Chia, M. Easton, S.M. Zhu, M. Gibson, N. Birbilis, and J.F. Nie: Intermetallics, 2009, vol. 17, pp. 481–90.10.1016/j.intermet.2008.12.009 ↗
19. S. Zhu, M.A. Easton, T.B. Abbott, J.F. Nie, M.S. Dargusch, N. Hort, and M.A. Gibson: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3543–54.10.1007/s11661-015-2946-9 ↗
20. C.Y. Su, D.J. Li, A.A. Luo, R.H. Shi, and X.Q. Zeng: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1970–84.10.1007/s11661-019-05136-w ↗
21. J. Campbell: Castings, Butterworth-Heinemann, Oxford, 2003.
22. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2388–2400.10.1007/s11661-009-9941-y ↗
23. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
24. B. Hu, Z.X. Li, D.J. Li, T. Ying, X.Q. Zeng, and W.J. Ding: J. Mater. Sci. Technol., 2022, vol. 105, pp. 68–80.10.1016/j.jmst.2021.06.071 ↗
25. W.J. Liu, B. Jiang, Q.S. Yang, J.Q. Tao, B. Liu, and F.S. Pan: Prog. Nat. Sci.-Mater., 2019, vol. 29, pp. 453–56.10.1016/j.pnsc.2019.07.002 ↗
26. F. Wang, H.K. Dong, Z. Wang, P.L. Mao, and Z. Liu: Acta Metall. Sin., 2017, vol. 53, pp. 211–19.
27. B. Tang, S.S. Li, X.S. Wang, D.B. Zeng, and R. Wu: Scr. Mater., 2005, vol. 53, pp. 1077–82.10.1016/j.scriptamat.2005.06.039 ↗
28. Y.S. Wang, Q.D. Wang, C.J. Ma, W.J. Ding, and Y.P. Zhu: Mater. Sci. Eng. A, 2003, vol. 342, pp. 178–82.10.1016/S0921-5093(02)00315-5 ↗
29. R. Mahmudi, F. Kabirian, and Z. Nematollahi: Mater. Des., 2011, vol. 32, pp. 2583–89.10.1016/j.matdes.2011.01.040 ↗
30. M.A. Easton, H. Wang, J. Grandfield, C.J. Davidson, D.H. StJohn, L.D. Sweet, and M.J. Couper: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3227–38.10.1007/s11661-012-1132-6 ↗
31. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, K.U. Kainer, and N. Hort: Mater. Sci. Forum, 2013, vol. 765, pp. 306–10.10.4028/www.scientific.net/MSF.765.306 ↗
32. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3647–63.10.1007/s11661-006-1059-x ↗
33. T.W. Clyne and G.J. Davies: Solidification and casting of metals, The Metals Society, London, 1979, pp. 275–78.
34. J.F. Song, F.S. Pan, B. Jiang, A. Atrens, M.X. Zhang, and Y. Lu: J. Magnes. Alloys, 2016, vol. 4, pp. 151–72.10.1016/j.jma.2016.08.003 ↗
35. T.W. Clyne and G.J. Davies: Br. Foundryman, 1981, vol. 74, pp. 65–73.
36. B. Hu, D.J. Li, Z.X. Li, J.K. Xu, X.Y. Wang, and X.Q. Zeng: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 789–805.10.1007/s11661-020-06101-8 ↗
37. W. Fu, R. Wang, H. Xue, J. Kuang, J. Zhang, G. Liu, and J. Sun: J. Alloys Compd., 2018, vol. 747, pp. 197–210.10.1016/j.jallcom.2018.02.328 ↗
38. S.M. Baek, H.K. Park, J.I. Yoon, J. Jung, J.H. Moon, S.G. Lee, J.H. Kim, T.S. Kim, S. Lee, N.J. Kim, and H.S. Kim: Mater. Sci. Eng. A, 2018, vol. 735, pp. 288–94.10.1016/j.msea.2018.08.050 ↗
39. Q. Wang, C.H. Caceres, and J.R. Griffiths: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2901–12.10.1007/s11661-003-0190-1 ↗
40. D. Argo, M. Pekguleryuz, P. Vermette and M. Lefebvre: Die Casting, Cincinnati, OH, 2001, pp. 181–186. Oct. 29-Nov. 1, 2001.
41. B. Hu, D.J. Li, and X.Q. Zeng: Solid State Phenom., 2022, vol. 327, pp. 98–104.10.4028/www.scientific.net/SSP.327.98 ↗
42. G. Vinodh, H.R. Jafari Nodooshan, D.J. Li, X.Q. Zeng, B. Hu, J.T. Carter, and A.K. Sachdev: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1897–1910.10.1007/s11661-020-05657-9 ↗
43. H. Zhang, S.L. Shang, Y. Wang, A. Saengdeejing, L.Q. Chen, and Z.K. Liu: Acta Mater., 2010, vol. 58, pp. 4012–18.10.1016/j.actamat.2010.03.020 ↗
44. Z.T. Jiang, B. Jiang, Y. Zeng, J.H. Dai, and F.S. Pan: Mater. Sci. Eng. A, 2015, vol. 645, pp. 57–64.10.1016/j.msea.2015.08.002 ↗
45. J. Dai, M.A. Easton, M. Zhang, D. Qiu, X. Xiong, W. Liu, and G. Wu: Metal. Mater. Trans. A, 2014, vol. 45A, pp. 4665–78.10.1007/s11661-014-2390-2 ↗
46. D. Qiu and M. Zhang: J. Alloys Compd., 2014, vol. 586, pp. 39–44.10.1016/j.jallcom.2013.10.042 ↗
47. J. Dai, M. Easton, S. Zhu, G. Wu, and W. Ding: J. Mater. Res., 2012, vol. 27, pp. 2790–97.10.1557/jmr.2012.313 ↗
48. C. Wang, J. Dai, W. Liu, L. Zhang, and G. Wu: J. Alloys Compd., 2015, vol. 620, pp. 172–79.10.1016/j.jallcom.2014.09.025 ↗
49. Z. Wang, Y.D. Huang, A. Srinivasan, Z. Liu, F. Beckmann, K.U. Kainer, and N. Hort: Mater. Des., 2013, vol. 47, pp. 90–100.10.1016/j.matdes.2012.12.044 ↗
50. J.F. Song, Z. Wang, Y.D. Huang, A. Srinivasan, F. Beckmann, K.U. Kainer, and N. Hort: Mater. Des., 2015, vol. 87, pp. 157–70.10.1016/j.matdes.2015.08.026 ↗
51. R.R. Kulkarni, N. Prabhu, P.D. Hodgson, and B.P. Kashyap: J. Mater. Eng. Perform., 2016, vol. 25, pp. 4145–56.10.1007/s11665-016-2269-z ↗
52. C. Zhang, Y.F. Wang, H.Y. Lv, H.Y. Gao, and B.D. Sun: Mater. Sci. Eng. A, 2021, vol. 821, p. 141591.10.1016/j.msea.2021.141591 ↗
53. I.H. Jung, M. Sanjari, J. Kim, and S. Yue: Scr. Mater., 2015, vol. 102, pp. 1–6.10.1016/j.scriptamat.2014.12.010 ↗
54. M.X. Zeng, R.N. Wang, B.Y. Tang, L.M. Peng, and W.J. Ding: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, p. 035018.10.1088/0965-0393/20/3/035018 ↗
55. W.J. Ding, J.X. Yi, P. Chen, D.L. Li, and B.Y. Tang: Solid State Sci., 2012, vol. 14, pp. 555–61.10.1016/j.solidstatesciences.2012.02.006 ↗
56. F. Czerwinski: Mater. Sci. Eng. A, 2021, vol. 809, p. 140973.10.1016/j.msea.2021.140973 ↗
57. J.X. Yi: Theory Computational Study of the Typical Precipitates of Mg-Al-Ce and Mg-Y-Zn Alloys, Xiangtan University, Jiangxi, 2010.
58. S.Y. Jiang and S.H. Li: Rare Met. Mater. Eng., 2013, vol. 42, pp. 397–400.
59. Y.Q. Liu: Calculation Research of Phase Structure Stability and Elastic Properties for Mg-A1-Ce Alloy Metal Compound, Hunan university, Hunan, 2016, pp. 31–41.
60. X.M. Yang, H. Hou, Y.H. Zhao, L. Yang, and P.D. Han: Rare Met. Mater. Eng., 2014, vol. 43(4), pp. 875–80.
61. W.Y. Yu, N. Wang, X.B. Xiao, B.Y. Tang, L.M. Peng, and W.J. Ding: Solid State Sci., 2009, vol. 11, pp. 1400–07.10.1016/j.solidstatesciences.2009.04.017 ↗
62. J. Ragani, P. Donnadieu, C. Tassin, and J.J. Blandin: Scr. Mater., 2011, vol. 65, pp. 253–56.10.1016/j.scriptamat.2011.04.022 ↗
63. K. Hagihara and K. Hayakawa: Mater. Sci. Eng. A, 2018, vol. 737, pp. 393–400.10.1016/j.msea.2018.09.056 ↗
64. H.N. Mathur, V.K. Maier, and K.S. Korte: Acta Mater., 2016, vol. 113, pp. 221–29.10.1016/j.actamat.2016.05.001 ↗
65. Q. Zhang: Effect of Rare Earth on Properties of Mg-Al Based Alloy via First-Principles Calculation, North University of China, Shanxi, 2016.
66. L. Cao, Z.Q. Li, W.C. Liu, G.H. Wu, and W.J. Ding: Light Met., 2013, vol. 6, pp. 48–53.
67. M. Stopyra and J. Adamiec: Arch. Foundry Eng., 2013, vol. 13, pp. 181–84.