journal article·2021-04

Mechanical Properties of Intercritically Annealed X80 Line Pipe Steels

Madhumanti Mandal, Warren Poole, Matthias Militzer, Laurie Collins

Publisher page

Abstract

Microalloyed low-carbon steels are used for line pipe applications as they combine high strength and acceptable fracture toughness with good weldability. During multi-pass welding, the strength and impact toughness of the material in the heat-affected zone (HAZ) is potentially degraded, in particular the regions where the thermal fields from multi-pass welds overlap (for example: the intercritically reheated coarse grain heat-affected zone, ICCGHAZ). Using a Gleeble thermomechanical simulator, bulk microstructures were produced that are representative for the ICCGHAZ for two high-strength X80 line pipe steels. Here, the first thermal cycle produces a bainitic microstructure that is characteristic of the coarse grain heat-affected zone (CGHAZ) and the second cycle involves intercritical annealing of this region to form microstructures representative of the ICCGHAZ. The effect of the intercritical austenite fraction and the resulting martensite–austenite (M/A) constituents on the tensile properties and the ductile-brittle transition temperature (DBTT) has been quantified for two steels with different carbon contents, i.e., 0.063 and 0.028 wt. pct. Detailed fractography studies have been conducted to evaluate the fracture mechanisms with respect to the microstructural features. Upon intercritical annealing (relevant to ICCGHAZ), the ductile–brittle transition temperature was above room temperature when a nearly continuous necklace of M/A formed on the prior austenite grain boundaries (for M/A ≈ 10 pct). Finally, the role of carbon content on the yield strength and plasticity of martensite has been considered for the tensile fracture behavior and ductile–brittle transition temperature. It is proposed that as the average carbon content of the M/A decreases (both due to (i) a decrease in the bulk carbon content of the steel and (ii) an increase in the volume fraction of austenite formed during intercritical annealing), martensite plasticity was possible which reduced nucleation of voids or cracks at the M/A–bainite interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. L. Schemmann, C. Stallybrass, J. Schröder, A. Liessem, and S. Zaefferer: in Proceedings of the 2018 12th International Pipeline Conference, ASME Volume 3: Operations, Monitoring, and Maintenance
2. Materials and Joining, 2018, pp. 1-7.
3. L.E. Collins, D. Bai, F. Hamad, and X. Chen: in The Seventeenth International Offshore and Polar Engineering Conference, 2007.
4. 3 B. Hutchinson, J. Komenda, G.S. Rohrer, and H. Beladi: Acta Mater., 2015, vol. 97, pp. 380–91.10.1016/j.actamat.2015.05.055 ↗
5. 4 A. Lambert-Perlade, A.F. Gourgues, and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337–48.10.1016/j.actamat.2004.01.025 ↗
6. 5 M. Mohammadijoo, S. Kenny, L. Collins, H. Henein, and D.G. Ivey: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2247–59.10.1007/s11661-017-4041-x ↗
7. 6 Y. Li and T.N. Baker: Mater. Sci. Technol., 2010, vol. 26, pp. 1029–40.10.1179/026708309X12512744154360 ↗
8. J.A. Gianetto, F. Fazeli, Y. Chen, and T. Smith: in Proceedings of the 2014 10th International Pipeline Conference, ASME Volume 3: Operations, Monitoring, and Maintenance
9. Materials and Joining, 2014, pp. 1-11.
10. 8 X.L. Wang, Z.Q. Wang, L.L. Dong, C.J. Shang, X.P. Ma, and S.V. Subramanian: Mater. Sci. Eng. A, 2017, vol. 704, pp. 448–58.10.1016/j.msea.2017.07.095 ↗
11. 9 N. Takayama, G. Miyamoto, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 2387–96.10.1016/j.actamat.2011.12.018 ↗
12. N. Romualdi, M. Militzer, W. Poole, L. Collins, and R. Lazor: in Proceedings of the 2020 13th International Pipeline Conference, ASME Volume 3: Operations, Monitoring, and Maintenance
13. Materials and Joining, 2020, pp. 1-10.
14. 11 T. Garcin, M. Militzer, W.J. Poole, and L. Collins: Mater. Sci. Technol., 2016, vol. 0836, pp. 1–14.
15. T. Garcin, K. Ueda, and M. Militzer: Metall. Mater. Trans. A, vol. 48, pp. 796–808.10.1007/s11661-016-3855-2 ↗
16. 13 J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3363–75.10.1007/s11661-004-0173-x ↗
17. 14 M. Bellavoine, M. Dumont, M. Dehmas, A. Stark, N. Schell, J. Drillet, V. Hébert, and P. Maugis: Mater. Charact., 2019, vol. 154, pp. 20–30.10.1016/j.matchar.2019.05.020 ↗
18. 15 S. Lee, B.C. Kim, and D. Kwon: Metall. Trans. A, 1992, vol. 23, pp. 2803–16.10.1007/BF02651759 ↗
19. 16 N. Huda, A.R.H. Midawi, J. Gianetto, R. Lazor, and A.P. Gerlich: Mater. Sci. Eng. A, 2016, vol. 662, pp. 481–91.10.1016/j.msea.2016.03.095 ↗
20. 17 J.L.M. Andia, L.F.G. de Souza, and I.S. Bott: Mater. Sci. Forum, 2014, vol. 783–786, pp. 657–62.10.4028/www.scientific.net/MSF.783-786.657 ↗
21. 18 C.L. Davis and J.E. King: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 563–73.10.1007/BF02651598 ↗
22. 19 C.L. Davis and J.E. King: Mater. Sci. Technol., 1993, vol. 9, pp. 8–15.10.1179/mst.1993.9.1.8 ↗
23. 20 Y. Li, D.N. Crowther, M.J.W. Green, P.S. Mitchell, and T.N. Baker: ISIJ Int., 2001, vol. 41, pp. 46–55.10.2355/isijinternational.41.46 ↗
24. 21 E. Bonnevie, G. Ferrière, A. Ikhlef, D. Kaplan, and J.M. Orain: Mater. Sci. Eng. A, 2004, vol. 385, pp. 352–8.10.1016/S0921-5093(04)00859-7 ↗
25. 22 X. Li, C. Shang, X. Ma, S.V. Subramanian, R.D.K. Misra, and J. Sun: Mater. Charact., 2018, vol. 138, pp. 107–12.10.1016/j.matchar.2018.01.042 ↗
26. 23 X. Li, X. Ma, S. V. Subramanian, R.D.K. Misra, and C. Shang: Metall. Mater. Trans. E, 2015, vol. 2, pp. 1–11.
27. 24 P. Mohseni, J.K. Solberg, M. Karlsen, O.M. Akselsen, and E. Østby: Metall. Mater. Trans. A, 2014, vol. 45, pp. 384–94.10.1007/s11661-013-2110-3 ↗
28. 25 N. Huda, Y. Wang, L. Li, and A.P. Gerlich: Mater. Sci. Eng. A, 2019, vol. 765, p. 138301.10.1016/j.msea.2019.138301 ↗
29. 26 A. Lambert-Perlade, J. Drillet, A.F. Gourgues, T. Sturel, and A. Pineau: Sci. Technol. Weld. Join., 2000, vol. 5, pp. 168–73.10.1179/136217100101538164 ↗
30. 27 B.C. Kim, S. Lee, N.J. Kim, and D.Y. Lee: Metall. Trans. A, 1991, vol. 22, pp. 139–49.10.1007/BF03350956 ↗
31. A. Lambert-Perlade, A.F. Gourgues, J. Besson, T. Sturel, and A. Pineau: Metall. Mater. Trans., 2004, vol. 35, pp. 1039–53.10.1007/s11661-004-1007-6 ↗
32. 29 N. Fujita, N. Ishikawa, F. Roters, C.C. Tasan, and D. Raabe: Int. J. Plast., 2018, vol. 104, pp. 39–53.10.1016/j.ijplas.2018.01.012 ↗
33. 30 F. Matsuda, K. Ikeuchi, H. Okada, I. Hrivnak, and H. Park: Trans. JWRI, 1994, vol. 23, pp. 231–8.
34. 31 L. Li, T. Han, and B. Han: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1254–63.10.1007/s11661-018-4480-z ↗
35. 32 K. Banerjee, M. Militzer, M. Perez, and X. Wang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3161–72.10.1007/s11661-010-0376-2 ↗
36. M. Mandal, W.J. Poole, M. Militzer, T. Garcin, and L. Collins: in 2018 12th International Pipeline Conference, ASME Volume 3: Operations, Monitoring, and Maintenance
37. Materials and Joining, 2018, pp. 1-8.
38. M. Mandal: Ph.D. Thesis, The University of British Columbia, Vancouver, 2020.
39. M.J. Gaudet: Ph.D. Thesis, The University of British Columbia, Vancouver, 2015.
40. 36 T.A. Kop, J. Sietsma, and S. van der Zwaag: Mater. Sci. Technol., 2001, vol. 17, pp. 1569–74.10.1179/026708301101509629 ↗
41. 37 F.S. Lepera: Metallography, 1979, vol. 12, pp. 263–8.10.1016/0026-0800(79)90041-7 ↗
42. 38 I. Arganda-Carreras, V. Kaynig, C. Rueden, K.W. Eliceiri, J. Schindelin, A. Cardona, and H.S. Seung: Bioinformatics, 2017, vol. 33, pp. 2424–6.10.1093/bioinformatics/btx180 ↗
43. 39 Y. Sakai, K. Tamanoi, and N. Ogura: Nucl. Eng. Des., 1989, vol. 115, pp. 31–9.10.1016/0029-5493(89)90257-4 ↗
44. 40 M. Maalekian, R. Radis, M. Militzer, A. Moreau, and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015–26.10.1016/j.actamat.2011.11.016 ↗
45. J.M. Reichert, W.J. Poole, M. Militzer, and L. Collins: in Proceedings of the 2014 10th International Pipeline Conference, ASME Volume 3: Operations, Monitoring, and Maintenance
46. Materials and Joining, 2014, pp. 1-7.10.1155/2014/729135 ↗
47. 42 N. Takayama, G. Miyamoto, and T. Furuhara: Acta Mater., 2018, vol. 145, pp. 154–64.10.1016/j.actamat.2017.11.036 ↗
48. 43 H.I. Aaronson, W.T. Reynolds, Jr., G.J. Shiflet, and G. Spanos: Metall. Trans. A, 1990, vol. 21A, pp. 1343–80.10.1007/BF02672557 ↗
49. H.K.D.H. Bhadeshia: Bainite in Steels, 3rd edn., Maney Publishing, 2015.
50. 45 A. Borgenstam, M. Hillert, and J. Ågren: Acta Mater., 2009, vol. 57, pp. 3242–52.10.1016/j.actamat.2009.03.026 ↗
51. 46 X. Li, C. Shang, X. Ma, B. Gault, S.V. Subramanian, J. Sun, and R.D.K. Misra: Scr. Mater., 2017, vol. 139, pp. 67–70.10.1016/j.scriptamat.2017.06.017 ↗
52. M. De Meyer, D. Vanderschueren, K. De Blauwe, and B.C. De Cooman: in 41st MWSP Conference Proceedings, ISS, Vol XXXVII, 1999, pp. 483–91.
53. 48 C.P. Scott and J. Drillet: Scr. Mater., 2007, vol. 56, pp. 489–92.10.1016/j.scriptamat.2006.11.033 ↗
54. 49 C.W. Sinclair, W.J. Poole, and Y. Bréchet: Scr. Mater., 2006, vol. 55, pp. 739–42.10.1016/j.scriptamat.2006.05.018 ↗
55. 50 P.F. Thomason: Ductile Fracture of Metals, Pergamon Press, Oxford, UK, 1990.
56. 51 M. Mazinani and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38, pp. 328–39.10.1007/s11661-006-9023-3 ↗
57. 52 M. Mazinani and W.J. Poole: Adv. Mater. Res., 2007, vol. 15–17, pp. 774–9.
58. 53 S.H. Goods and L.M. Brown: Acta Metall., 1979, vol. 27, pp. 1–15.10.1016/0001-6160(79)90051-8 ↗
59. 54 A.S. Argon, J. Im, and R. Safoglu: Metall. Trans. A, 1975, vol. 6, pp. 825–37.10.1007/BF02672306 ↗
60. 55 F.A. McClintock: Int. J. Fract. Mech., 1968, vol. 4, pp. 101–30.10.1007/BF00188939 ↗
61. 56 R. Iricibar, G. Leroy, and J.D. Embury: Met. Sci., 1980, vol. 14, pp. 337–43.10.1179/msc.1980.14.8-9.337 ↗
62. L.M. Brown and J.D. Embury: in Proc. 3rd Int. Conf. Strengths of Metals and Alloys, Inst. of Metals, London, England, 1973, pp. 164–9.
63. 58 G. Bao, J.W. Hutchinson, and R.M.M. McMeeking: Acta Metall. Mater., 1991, vol. 39, pp. 1871–82.10.1016/0956-7151(91)90156-U ↗
64. W.C. Leslie: The Physical Metallurgy of Steels, Mc-Graw Hill, 1981.
65. 60 W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 5–26.10.1007/BF02680580 ↗
66. 61 G. Krauss: Principles of Heat Treatment of Steels, American Society for Metals, Metals Park, Ohio, 1980.
67. W.A. Backofen: Deformation Processing, Addison-Wesley, 1972.
68. 63 N.N. Davidenkov: Dynamic Testing of Metals, ONTI, Moscow, 1936.
69. 64 E. Orowan: Trans. Inst. Engrs Shipbuild. Scotl., 1945, vol. 89, pp. 165–215.
70. 65 J.F. Knott: Fundamentals of Fracture Mechanics, 1st edn., Butterworth & Co Publishers Ltd., London, 1973.
71. M.A. Meyers and K.K. Chawla: Mechanical Behaviour of Materials, 2nd edn., Cambridge University Press, Cambridge , 2009.
72. S. Winkler, A. Thompson, C. Salisbury, M. Worswick, I. Riemsdijk, and R. Mayer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1350–8.10.1007/s11661-008-9495-4 ↗
73. 68 R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
74. 69 T. Jia and M. Militzer: Metall. Mater. Trans. A, 2015, vol. 46, pp. 614–21.10.1007/s11661-014-2659-5 ↗