Characteristics of Susceptible Microstructure for Hydrogen-Induced Cracking in the Coarse-Grained Heat-Affected Zone of Carbon Steel
Source abstract
Abstract
Hydrogen-induced cracking (HIC) susceptibility of the coarse-grained heat-affected zone (CGHAZ) of carbon steel was evaluated using implant tests and the characteristics of susceptible microstructure to HIC was investigated. Three types of carbon steel with different alloying elements were employed as base metals to vary the microstructure of the CGHAZ and implant test assemblies were prepared using an automatic shielded metal arc welding process. A clear difference in microstructure was observed between the CGHAZs of steel with high and low HIC susceptibility; the formation of the primary ferrite in the CGHAZ of carbon steel plays an important role in decreasing the HIC susceptibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. S. Kou: Welding Metallurgy, John Wiley & Sons, Inc., New Jersey, 2003, pp. 410-17.
2. S. Kim, J.S. Seo and C. Lee: Met. Mater. Int., 2012, vol. 18, pp. 1029-36.10.1007/s12540-012-6015-2 ↗
3. X. Yue: Weld. World, 2015, vol. 59, pp. 77-89.10.1007/s40194-014-0181-4 ↗
4. G. Chakraborty, R. Rejeesh and S.K. Albert: Defence Technol., 2016, vol. 12, pp. 490-95.10.1016/j.dt.2016.09.003 ↗
5. R. Kurji, O. Lavigne and R. Ghomashchi: Weld. World, 2016, vol. 60, pp. 883-97.10.1007/s40194-016-0348-2 ↗
6. A.T. Hanzaei, S.P.H. Marashi and E. Ranjbarnodeh: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 9399-9407.10.1016/j.ijhydene.2018.03.216 ↗
7. I. Maroef, D.L. Olson, M. Eberhart and G.R. Edwards: Int. Mater. Rev., 2002, vol. 47, pp. 191-223.10.1179/095066002225006548 ↗
8. L. Lan, X. Kong, Z. Hu and C. Qiu: Phil. Mag. Lett., 2014, vol. 94, pp. 764-71.10.1080/09500839.2014.976286 ↗
9. H.J. Kang, T.W. Lee, B.H. Yoon, S.J. Park, W.S. Chang, K.M. Cho and N. Kang: Korean J. Met. Mater., 2012, vol. 50, pp. 52-58.10.3365/KJMM.2012.50.1.052 ↗
10. T. Kasuya, Y. Hashoba, H. Inoue, S. Nakamura and K. Takai: Weld. World, 2013, vol. 57, pp. 581-93.10.1007/s40194-013-0056-0 ↗
11. B.-H. Yoon: Journal of Welding and Joining, 2018, vol. 36, pp. 38-44.10.5781/JWJ.2018.36.3.6 ↗
12. J.R. Fekete, J.W. Sowards and R.L. Amaro: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 10547-58.10.1016/j.ijhydene.2015.06.090 ↗
13. B.A. Graville: Weld. World, 1986, vol. 24, pp. 190-98.
14. N. Yurioka and H. Suzuki: Int. Mater. Rev., 1990, vol. 35, pp. 217-49.10.1179/imr.1990.35.1.217 ↗
15. R. Kurji and N. Coniglio: Int. J. Adv. Manuf. Technol., 2015, vol. 77, pp.1581-97.10.1007/s00170-014-6555-3 ↗
16. Y. Zhai, B. Huang, Z. Zhang, X. Mao and Z. Zhao: Fusion Eng. Des., 2018, vol. 133, pp. 32-38.10.1016/j.fusengdes.2018.05.071 ↗
17. H. Granjon: Met. Constr.-Brit. Weld., 1969, vol. 1, pp. 509-15.
18. X. Yue, X.L. Feng and J.C. Lippold: Weld. J., 2013, vol. 92, pp. 265s-73s.
19. G.M. Reddy, T. Mohandas and D.S. Sarma: Sci. Technol. Weld. Joi., 2003, vol. 8, pp. 407-14.10.1179/136217103225005552 ↗
20. H.M. Yun, Y.S. Kim and J.E. Park: Journal of Welding and Joining, 1984, vol. 2, pp. 30-40.
21. J.H. Kiefer: Weld. J., 1996, vol. 75, pp. 155s-61s.
22. J.-H. Kang and S.-H. Kim: Kor. J. Met. Mater., 2010, vol. 48, pp. 730-40.
23. Y. Kang, S. Jeong, J.-H. Kang and C. Lee: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2842-54.10.1007/s11661-016-3456-0 ↗
24. N. Saini, C. Pandey and M.M. Mahapatra: Int. J. Hydrogen Energy, 2017, vol. 42, pp. 17328-38.10.1016/j.ijhydene.2017.05.214 ↗
25. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, J. Hartmann and S.G. Jansto: Mat. Sci. Eng. A-Struct., 2008, vol. 478, pp. 26-37.10.1016/j.msea.2007.06.003 ↗
26. J. Li, X. Gao, L. Du and Z. Liu: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1504-12.10.1016/j.jmst.2017.09.013 ↗
27. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross and K.E. Nygren: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2323-41.10.1007/s11661-015-2836-1 ↗
28. C. Park, N. Kang and S. Liu: Corros. Sci., 2017, vol. 128, pp. 33-41.10.1016/j.corsci.2017.08.032 ↗
29. C. Park, N. Kang, M. Kim and S. Liu: Mater. Lett., 2019, vol. 235, pp. 193-96.10.1016/j.matlet.2018.10.049 ↗
30. Y. Mine, Z. Horita and Y. Murakami: Acta Mater., 2010, vol. 58, pp. 649-57.10.1016/j.actamat.2009.09.043 ↗
31. B.S. Kumar, V. Kain, M. Singh and B. Vishwanadh: Mat. Sci. Eng. A-Struct., 2017, vol. 700, pp. 140-51.10.1016/j.msea.2017.05.086 ↗
32. G.M. Pressouyre: Metall. Trans. A, 1979, vol. 10A, pp. 1571-73.10.1007/BF02812023 ↗
33. E. Van den Eeckhout, T. Depover and K. Verbeken: Metals, 2018, vol. 8, p. 779.10.3390/met8100779 ↗
34. J. Han, J.-H. Nam and Y.-K. Lee: Acta Mater., 2016, vol. 113, pp. 1-10.10.1016/j.actamat.2016.04.038 ↗
35. D. Pérez-Escobar, C. Miñambres, L. Duprez, K. Verbeken and M. Verhaege: : Corros. Sci., 2011, vol. 53, pp. 3166-76.10.1016/j.corsci.2011.05.060 ↗