Impact of Annealing Prior to Solution Treatment on Aging Precipitates and Intergranular Corrosion Behavior of Al-Cu-Li Alloy 2050
Source abstract
Abstract
The influences of annealing prior to solution treatment on the grain structure, subsequent aging precipitates, and intergranular corrosion (IGC) of Al-Cu-Li alloy (AA2050) sheet with T6 aging at 448 K (175 °C) were investigated. Annealing impedes the full recrystallization during solution treatment, increasing the population density of T1 (Al2CuLi) precipitates, but decreasing that of θ′ (Al2Cu) precipitates, of the aged alloy. Meanwhile, annealing leads to the heterogeneous distribution of T1 precipitates, increasing the alloy hardness, and decreasing the open-circuit potential of the aged alloy. With prolonged aging time, the corrosion mode of the aged AA2050 samples with and without annealing evolved in a similar manner. The corrosion mode as a function of aging may be summarized as local IGC with pitting and general IGC with pitting (following initial aging and under the underaged condition), pitting corrosion (later in the under-aging stage), pitting with slight IGC (near the peak-aged condition), and pitting with local IGC (under the overaging condition). The annealing treatment hinders IGC propagation on the rolling surface while accelerating the IGC on transverse surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. J.P. Immarigeon, R.T. Holt, A.K. Koul, L. Zhao, W. Wallace, and J.C. Beddoes: Mater. Charact., 1995, vol. 35, pp. 41-67.10.1016/1044-5803(95)00066-6 ↗
2. R.J. Rioja, and J. Liu: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3325-3337.10.1007/s11661-012-1155-z ↗
3. T. Warner: Mater. Sci. Forum, 2006, vols. 519-521, pp. 1271-1278.10.4028/www.scientific.net/MSF.519-521.1271 ↗
4. N.E. Prasad, A. Gokhale, and R.J.H Wanhill: Aluminum-Lithium Alloys: Processing, Properties, and Applications, Elsevier, Waltham, MA. 2014, pp. 63–65 and 261.
5. J.F. Nie, B.C. Muddle, and I.J. Polmear: Mater. Sci. Forum, 1996, vols. 217-222, pp. 1257-1262.10.4028/www.scientific.net/MSF.217-222.1257 ↗
6. J.C. Huang, and A.J. Ardell: Acta Metall., 1988, vol. 36, pp. 2995-3006.10.1016/0001-6160(88)90182-4 ↗
7. B. Decreus, A. Deschamps, F.D. Geuser, P. Donnadieu, C. Sigli, and M. Weyland: Acta Mater., 2013, vol. 61, pp. 2207-2218.10.1016/j.actamat.2012.12.041 ↗
8. Q. Liu, R.H. Zhu, D.Y. Liu, Y. Xu, J.F. Li, Y.L. Chen, Z.H. Zhang, and Z.Q. Zheng: Mater. Corros., 2017, vol. 68, pp. 65-76.10.1002/maco.201609090 ↗
9. J.F. Li, P.L. Liu, Y.L. Chen, X.H. Zhang, and Z.Q. Zheng: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 2103−2112.10.1016/S1003-6326(15)63821-3 ↗
10. W.A. Cassada, G.J. Shiflet, and E.A. Starke: Metall. Mater. Trans. A, 1991, vol. 22, pp. 287-297.10.1007/BF02656798 ↗
11. W.A. Cassada, G.J. Shiflet, and E.A. Starke: Metall. Mater. Trans. A, 1991, vol. 22, pp. 299-306.10.1007/BF02656799 ↗
12. B.M. Gable, A.W. Zhu, A.A. Csontos, and E. Starke: J. Light Met., 2001, vol. 1, pp. 1-14.10.1016/S1471-5317(00)00002-X ↗
13. T. Dorin, A. Deschamps, F.D. Geuser, and F. Robaut: Mater. Sci. Eng. A, 2014, vol. 627, pp. 51-55.10.1016/j.msea.2014.12.073 ↗
14. R.G. Buchheit, J.P. Moran, and G.E. Stoner: Corrosion, 1994, vol. 50, pp. 120-130.10.5006/1.3293500 ↗
15. J.F. Li, Z.Q. Zheng, S.C. Li, W.J. Chen, W.D. Ren, and X.S. Zhao: Corros. Sci., 2007, vol. 49, pp. 2436-49.10.1016/j.corsci.2006.12.002 ↗
16. R.G. Buchheit, J.P. Moran, and G.E. Stoner: Corrosion, 2012, vol. 46, pp. 610-617.10.5006/1.3585156 ↗
17. M. Guérin, J. Alexis, E. Andrieu, L. Laffont, W. Lefebvre, G. Odemer, and C. Blanc: Corros. Sci., 2016, vol. 102, pp. 291-300.10.1016/j.corsci.2015.10.020 ↗
18. V. Proton, J. Alexis, E. Andrieu, J. Delfosse, A. Deschamps, F.D. Geuser, M.C. Lafont, and C. Blanc: Corros. Sci., 2014, vol. 80, pp. 494–502.10.1016/j.corsci.2013.11.060 ↗
19. V. Proton, J. Alexis, E. Andrieu, J. Delfosse, M.C. Lafont, and C. Blanc: Corros. Sci., 2013, vol. 73, pp. 130-142.10.1016/j.corsci.2013.04.001 ↗
20. Y. Ma, X. Zhou, Y. Liao, Y. Yi, H. Wu, Z. Wang, and W. Huang: Corros. Sci., 2017, vol. 107, pp. 41-48.10.1016/j.corsci.2016.02.018 ↗
21. J.E. Kertz, P.I. Gouma, and R.G. Buchheit: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2561-2573.10.1007/s11661-001-0046-5 ↗
22. W. Huang, Y. Ma, X. Zhou, X. Meng, Y. Liao, L. Chai, Y. Yi, and X. Zhang: Surf. Interface. Anal., 2015, vol. 48, pp. 838-842.10.1002/sia.5817 ↗
23. Y. Ma, X. Zhou, W. Huang, G.E. Thompson, and X. Zhang: Corros. Eng. Sci. Technol., 2015, vol. 50, pp. 420-24.10.1179/1743278214Y.0000000237 ↗
24. N. Ott, S.K. Kairy, Y. Yan, and N. Birbilis: Metall. Mater. Trans. A, 2017, vol. 48, pp. 51-56.10.1007/s11661-016-3848-1 ↗
25. N. Ott, Y.M. Yan, S. Ramamurthy, S. Kairy, and N. Brbilis: Metall. Mater. Trans. A, 2016, vol. 119, pp. 17-20.
26. M.J. Robinson, and N.C. Jackson: Corros. Sci., 1999, vol. 41, pp. 1013-1028.10.1016/S0010-938X(98)00171-1 ↗
27. K.D. Ralston, D. Fabijanic, and N. Birbilis: Electrochim. Acta, 2011, vol. 56, pp. 1729-1736.10.1016/j.electacta.2010.09.023 ↗
28. E. Kus, Z. Lee, S. Nutt, and F. Mansfeld: Corrosion, 2006, vol. 62, pp. 152-161.10.5006/1.3278260 ↗
29. E. Sikora, X.J. Wei, and B.A. Shaw: Corrosion, 2006, vol. 60, pp. 387-389.10.5006/1.3287748 ↗
30. T.C. Tsai, and T.H. Chuang: Mater. Sci. Eng. A, 1997, vol. 225, pp. 135-144.10.1016/S0921-5093(96)10840-6 ↗
31. K.D. Ralston, N. Birbilis, and C.H.J. Davies: Scripta Mater., 2010, vol. 63, pp. 1201-1204.10.1016/j.scriptamat.2010.08.035 ↗
32. S. Ruan, D.A. Wolfe, and G.S. Frankel: J. Statist. Plann. Inference, 2004, vol. 126, pp. 553-568.10.1016/j.jspi.2003.08.008 ↗
33. Z.M. Wang, and R.N. Shenoy: (Microstructural Characterization of Aluminum-Lithium Alloys 1460 and 2195) Report No. NASA/CR-1998-206914, Analytical Services and Materials, Inc., Hampton, VA, February 1998.
34. T. Dorin, P. Donnadieu, J.M. Chaix, W. Lefebvre, F.D. Geuser, and A. Deschamps: Micron., 2015, vol. 78, pp. 19-27.10.1016/j.micron.2015.06.002 ↗
35. J. Murray, A. Peruzzi, and J.P. Abriata: J. Phase Equilib., 1992, vol. 13, pp. 277-291.10.1007/BF02667556 ↗
36. E. Anselmino, A. Miroux, and S.V.D. Zwaag: Mater. Charact., 2004, vol. 52, pp. 289-300.10.1016/j.matchar.2004.06.003 ↗
37. K.P. Mingard, B. Cantor, I.G. Palmer, I.R. Hughes, P.W. Alexander, T.C. Willis, and J. White: Acta Mater. 2000, vol. 48, pp. 2435-2449.10.1016/S1359-6454(00)00075-6 ↗
38. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater Sci., 2008, vol. 53, pp. 421-480.10.1016/j.pmatsci.2007.10.001 ↗
39. D. Tsivoulas, J.D. Robson, C. Sigli, and P.B. Prangnell: Acta Mater., 2012, vol. 60, pp. 5245-5259.10.1016/j.actamat.2012.06.012 ↗
40. F.J. Humphreys, and M. Hatherly: Recrystallisation and Related Annealing Phenomena, Elsevier, New York, NY, 2004, pp. 215-267.10.1016/B978-008044164-1/50011-6 ↗
41. J.F. Humphreys: Mater. Sci. Forum, 2004, vols. 467-470, pp. 107-116.10.4028/www.scientific.net/MSF.467-470.107 ↗
42. G. Gottstein, D.A. Molodov, and L.S. Shvindlerman: Interf. Sci., 1998, vol. 126, pp. 7-22.10.1023/A:1008641617937 ↗
43. P.A. Beck, and P.R. Sperry: J. Appl. Phys., 1950, vol. 21, pp. 150-152.10.1063/1.1699614 ↗
44. P. Bate, and B. Hutchinson: Scripta Mater., 1997, vol. 36, pp. 195-198.10.1016/S1359-6462(96)00361-2 ↗
45. M.C. Theyssier, and J.H. Driver: Mater. Sci. Eng. A, 1999, vol. 272, pp. 73-82.10.1016/S0921-5093(99)00469-4 ↗
46. M. Winning: Scripta Mater., 2008, vol. 58, pp. 85-88.10.1016/j.scriptamat.2007.09.034 ↗
47. K. Kashihara, and F. Inoko: Acta Mater., 2001, vol. 49, pp. 3051-3061.10.1016/S1359-6454(01)00211-7 ↗
48. X.F. Luo, Z.Q. Zheng, J.F. Zhong, H.F. Zhang, S.C. Li, and J.F. Li: Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 1833-1842.
49. J.F. Li, N. Birbilis, D.Y. Liu, Y.L. Chen, X.H. Zhang, and C. Cai: Corros. Sci., 2016, vol. 105, pp. 44-57.10.1016/j.corsci.2016.01.001 ↗
50. J.F. Li, Z.Q. Zheng, W.D. Ren, W.J. Chen, X.S. Zhao, and S.C. Li: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 1268-1273.10.1016/S1003-6326(07)60005-3 ↗
51. J.F. Li, C.X. Li, Z.W. Peng, W.J. Chen, and Z.Q. Zheng: J. Alloys. Compd., 2008, vol. 460, pp. 688-693.10.1016/j.jallcom.2007.06.072 ↗
52. F.L. Jin, Z. Zheng, N. Jiang, and C. Tan: Mater. Chem. Phys., 2005, vol. 91, pp. 325-329.10.1016/j.matchemphys.2004.11.034 ↗