journal article·2015-07Open access

Assessment of Post-eutectic Reactions in Multicomponent Al-Si Foundry Alloys Containing Cu, Mg, and Fe

Mousa Javidani, Daniel Larouche, X. Grant Chen

Abstract

Post-eutectic reactions occurring in Al-Si hypoeutectic alloys containing different proportions of Cu, Mg, and Fe were thoroughly investigated in the current study. As-cast microstructures were initially studied by optical and electron microscopy to investigate the microconstituents of each alloy. Differential scanning calorimetry (DSC) was then used to examine the phase transformations occurring during the heating and cooling processes. Thermodynamic calculations were carried out to assess the phase formation under equilibrium and in nonequilibrium conditions. The Q-Al5Cu2Mg8Si6 phase was predicted to precipitate from the liquid phase, either at the same temperature or earlier than the θ-Al2Cu phase depending on the Cu content of the alloy. The AlCuFe-intermetallic, which was hardly observed in the as-cast microstructure, significantly increased after the solution heat treatment in the alloys containing high Cu and Fe contents following a solid-state transformation of the β-Al5FeSi phase. After the solution heat treatment, the AlCuFe-intermetallics were mostly identified with the stoichiometry of the Al7Cu2Fe phase. Thermodynamic calculations and microstructure analysis helped in determining the DSC peak corresponding to the melting temperature of the N-Al7Cu2Fe phase. The effect of Cu content on the formation temperature of π-Al8Mg3FeSi6 is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M. Garat: US Patent Application, 0126947 Al, Jun 2, 2011.
2. M. Garat, International Journal of Metalcasting, 2011, Vol.5(3), pp.17-24.10.1007/BF03355515 ↗
3. M. Tash, F. H. Samuel, F. Mucciardi, and H. W. Doty, Materials Science and Engineering: A, 2007, Vol.443(1-2), pp.185-201.10.1016/j.msea.2006.08.054 ↗
4. L. Heusler, F. J. Feikus, and M. O. Otte, AFS Transactions, 2001, Vol.109, pp.443-451.
5. F. J. Feikus, AFS Transactions, 1998, Vol.106, pp.225- 231.
6. C. C. Engler-Pinto, J. V. Lasecki, J. M. Boileau, and J. E. Allison, SAE Technical Paper, 2004, Vol.01-1029, pp.459-464.
7. M. Garat and G. Laslaz, AFS Transactions, 2007, Vol.115, pp.89-96.
8. G. Laslaz: US Patent Application, 0133949 Al, Jun 22, 2006.
9. J.A. Taylor: 35th Australian Foundry Institute National Conference, Adelaide, South Australia, Australian Foundry Institute (AFI), 2004, pp. 148–57.
10. M. Javidani and D. Larouche, International Materials Reviews, 2014, Vol.59(3), pp.132-158.10.1179/1743280413Y.0000000027 ↗
11. A. Wiengmoon, J. T. H. Pearce, T. Chairuangsri, S. Isoda, H. Saito, and H. Kurata, Micron, 2013, Vol.45(0), pp.32-36.10.1016/j.micron.2012.10.009 ↗
12. E. Sjölander and S. Seifeddine, Journal of Materials Processing Technology, 2010, Vol.210(10), pp.1249-1259.10.1016/j.jmatprotec.2010.03.020 ↗
13. G. Wang, X. Bian, W. Wang, and J. Zhang, Materials Letters, 2003, Vol.57(24-25), pp.4083-4087.10.1016/S0167-577X(03)00270-2 ↗
14. L. Backerud, G.Chai, and J.Tamminen: ‘Solidification Characteristics of Aluminum Alloys’, 2-Foundry Alloys, 115-150; 1990, USA, Skan Aluminum
15. M. H. Mulazimoglu, N. Tenekedjev, B. M. Closset, and J. E. Gruzleski, Cast Metals, 1993, Vol.6(1), pp.16-28.10.1080/09534962.1993.11819122 ↗
16. E. Samuel, A. Samuel, and H. Doty, AFS Trans, 1996, Vol.104, pp.893-901.
17. F. H. Samuel, Journal of Materials Science, 1998, Vol.33(9), pp.2283-2297.10.1023/A:1004383203476 ↗
18. P. Ouellet, F. H. Samuel, D. Gloria, and S. Valtierra, International Journal of Cast Metals Research, 1997, Vol.10, pp.67-78.10.1080/13640461.1997.11819221 ↗
19. M.B. Djurdjevic, W. Kasprzak, C.A. Kierkus, W.T. Kierkus, and J.H. Sokolowski: 105th Casting Congress, Dallas, 2001.
20. P.-S. Wang, S.-L. Leea, J.-C. Lina, and M.-T. Jahn, Journal of Materials Research, 2000, Vol.15(09), pp.2027-2035.10.1557/JMR.2000.0291 ↗
21. Q. G. Wang and C. J. Davidson, Journal of Materials Science, 2001, Vol.36(3), pp.739-750.10.1023/A:1004801327556 ↗
22. J. A. Taylor, D. H. St John, J. Barresi, and M. J. Couper, Mater. Sci. Forum, 2000, Vol.331-337, pp.277-282.10.4028/www.scientific.net/MSF.331-337.277 ↗
23. A. LiseDons: J. Light Met., 2001, vol. 1(2), pp. 133–49.10.1016/S1471-5317(01)00007-4 ↗
24. H. R. Ammar, A. M. Samuel, F. H. Samuel, G. K. Sigworth, and J. C. Lin, AFS Transactions, 2010, Vol.118, pp.9-27.
25. M. Javidani, D. Larouche, and X.G. Chen: AFS Trans., 2014, vol. 122 (14–056), pp. 95–104.
26. V.S. Zolotorevsky, N.A. Belov, and M.V. Glazoff: Casting Aluminum Alloy, Elsevier Science, Oxford, 2007, pp. 1–95.10.1016/B978-008045370-5.50003-1 ↗
27. N.A. Belov, D.G. Eskin, and A.A. Aksenov: Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys, Elsevier, , Oxford, 2005.
28. E. Cerri, E. Evangelista, S. Spigarelli, P. Cavaliere, and F. DeRiccardis, Materials Science and Engineering A, 2000, Vol.284(1-2), pp.254-260.10.1016/S0921-5093(00)00748-6 ↗
29. X. Yan and J.C. Lin: US Patent Application, 0105045 A1, May 2013.
30. B. Sundman, B. Jansson, and J.-O. Andersson, Calphad, 1985, Vol.9, pp.153-190.10.1016/0364-5916(85)90021-5 ↗
31. TTAL7: TT Al-Based Alloys Database, Version 7.0, T. Ltd., Surrey Technology Center, Guildford, U.K., 2010.
32. D. Larouche, Calphad, 2007, Vol.31(4), pp.490-504.10.1016/j.calphad.2007.04.002 ↗
33. ‘Oxford Instruments HKL, The HKL Channel 5 software’, 2007 [viewed 2014]. http://caf.ua.edu/wp-content/uploads/docs/JEOL-7000F-Oxford_Channel_5_User_Manual.pdf. Accessed 19 March 2015.
34. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworths, London, 1976
35. L. Lasa and J. M. Rodriguez-Ibabe, Journal of Materials Science, 2004, Vol.39(4), pp.1343-1355.10.1023/B:JMSC.0000013895.72084.c9 ↗
36. E. J. Martínez, M. A. Cisneros, S. Valtierra, and J. Lacaze, Scripta Materialia, 2005, Vol.52(6), pp.439-443.10.1016/j.scriptamat.2004.11.012 ↗
37. K. LIU, X. CAO, and X.-G. CHEN, Metallurgical and Materials Transactions A, 2012, Vol.43A, pp.1097-1101.10.1007/s11661-011-1004-5 ↗
38. K. Liu, X. Cao, and X. G. Chen, Metallurgical and Materials Transactions A, 2013, Vol.44A, pp.3494-3503.10.1007/s11661-013-1726-7 ↗
39. G. Mrówka-Nowotnik and J. Sieniawski, Archives of Materials Science and Engineering, 2011, Vol.47(2), pp.85-94.