journal article·2015-08

Influence of Grain Shape, Size, and Grain Boundary Diffusion on High-Temperature Oxidation of Pure Metal Fe, Cu, and Zn

Sneha Samal, S. K. Mitra

Publisher page

Abstract

Influence of grain shape, size, and grain boundary diffusion on high-temperature oxidation of pure metals such as Fe, Cu, and Zn was investigated in this article. The oxidized scale was developed on the outer layer of the metal surface depending on the geometrical parameter of the metal-scale system as well as diffusion direction through boundary layers towards the base of the material. The creation of the inner layer and the morphological structure developed from the internal stress generated during the growth of the oxide scale and by diffusion of metal/air system. The oxidation rate depends on the cation and anion mobile transport of the metal in the inward and outward direction of the diffusion layer. Oxidation rate was decreased with the decreasing grain size of the pure metal, whereas Zn metal deviated from this principle. A strong correlation between rate of oxidation and grain shape, size was established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. R.E. Hummel, Understanding Materials Science (Springer-Verlag New York, Inc. New York, 2004), p. 36.10.1007/b137957 ↗
2. S.K. Mitra, S.K. Roy, and S.K. Bose: Oxid. Met., (1990), vol. 34 , pp. 101–21.10.1007/BF00664341 ↗
3. P. Kofstad, High Temperature Corrosion, Elsevier Applied Science Publishers, London and New York, 1988, p. 186.
4. I. Anžel: High temperature oxidation of metals and alloys, Association of Metallurgical Engineers of Serbia, AMES, Review paper, UDC:669.01.094.3/169.1-977, pp. 325–36.
5. C.D.S. Tuck, M.E. Whitehead, and R.E. Smallman: Corros. Sci., 1981, vol. 21, pp. 333–52.10.1016/0010-938X(81)90071-8 ↗
6. N. Birks, G.H. Meier, and F.S. Petit: Introduction to the High-Temperature Oxidation of Metals, Cambridge Press, Cambridge, MA, 2006.10.1017/CBO9781139163903 ↗
7. M. Spiegel Zaha, and H.J. Grabke: Corros. Sci., 2000, vol. 42, pp. 1093–122.10.1016/S0010-938X(99)00142-0 ↗
8. A.G. Evans, G.B. Crumley, and R.E. Demaray: Oxid. Met., 1983, vol. 20, pp. 193–216.10.1007/BF00656841 ↗
9. A.G. Evans, and J.W. Hutchinson: Int. J. Solids Struct., 1984, vol. 20, pp. 455–66.10.1016/0020-7683(84)90012-X ↗
10. S. Mrowec: Corros. Sci., 1967, vol. 7, pp. 563–78.10.1016/0010-938X(67)80033-7 ↗
11. H.E. Evans, D.A. Hilton, R.A. Holm, and S.J. Webster: Oxid. Met., 1978, vol. 12, pp. 473–87.10.1007/BF00603805 ↗
12. G.B. Gibbs: Oxid. Met., 1981, vol. 16, pp. 147–58.10.1007/BF00603749 ↗
13. Y. Zhu, K. Mimura, J.-W. Lim, M. Isshiki, and Q. Jiang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1231–37.10.1007/s11661-006-1074-y ↗
14. H. Hindam, and D.P. Whittle: Oxid. Met., 1982, vol. 18, pp. 245–84.10.1007/BF00656571 ↗
15. K. Hoshino, and N.L. Peterson: J. Am. Ceram. Soc., 1983, vol. 66, pp. C202–03.10.1111/j.1151-2916.1983.tb10572.x ↗
16. R. Haugsrud: Corros. Sci., 2003, vol. 45, pp. 211–35.10.1016/S0010-938X(02)00085-9 ↗
17. R. Peraldi, D. Monceau, and B. Pieraggi: Oxid. Met., 2002, vol. 58, pp. 275–95.10.1023/A:1020102604090 ↗
18. Y. Zhu, K. Mimura, and M. Isshiki: Mater. Trans., 2009, vol. 43, no. 9, pp. 2173–6.10.2320/matertrans.43.2173 ↗
19. A. Strawbridge, and R.A. Rapp: J. Electrochem. Soc., 1994, vol. 141, no. 7, pp. 1905–15.10.1149/1.2055025 ↗
20. D.M. Rishel, F.S. Pettit, and N. Birks: Mater. Sci. Eng. A, 1991, vol. A143, pp. 197–211.10.1016/0921-5093(91)90739-A ↗