journal article·2024-01Open access

High-Strength Dissimilar Welds Between a NiTi Shape Memory Alloy and Titanium Obtained by Intermixing Niobium Using Pulsed Laser Beam Welding

M. Wiegand, N. Sommer, L. Marks, S. Böhm

Abstract

Abstract Joining of NiTi shape memory alloys with commercially pure titanium (Ti) is of great interest for manifold industrial applications. However, dissimilar fusion welding of these materials is associated with the formation of extremely brittle intermetallic compounds, e.g., Ti2Ni and TiNi3, which drastically limit the mechanical properties of NiTi/Ti joints. The present investigation seeks to improve both chemical compatibility and mechanical performance through intermixing of a niobium foil as filler material into a NiTi/Nb/Ti butt-joint configuration by means of pulsed laser beam welding. Different pulse durations are applied to tailor intermixing and evaluate the deviating chemical compositions of the weld metal. It is demonstrated that intermixing of niobium significantly increases the weldability of the material combination NiTi/Ti compared to autogenous welding. However, the proportion of intermixed filler material exerts a substantial impact on the microstructural evolution and mechanical properties. Ultimate tensile strengths of up to 679 MPa with fracture occurring in the titanium base metal at an elongation at break of 18.7 pct is obtained by a reduction of the pulse duration, which represents a major improvement over previous studies focusing on fusion welding of NiTi to titanium and its alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. D.J. Hartl and D.C. Lagoudas: Proc. Inst. Mech. Eng. Part G, 2007, vol. 221, pp. 535–52.10.1243/09544100JAERO211 ↗
2. J. MohdJani, M. Leary, A. Subic, and M.A. Gibson: Mater. Des. (1980-2015), 2014, vol. 56, pp. 1078–13.10.1016/j.matdes.2013.11.084 ↗
3. L. Petrini and F. Migliavacca: J. Metall., 2011, vol. 2011, pp. 1–5.10.1155/2011/501483 ↗
4. S. Saadat, J. Salichs, M. Noori, Z. Hou, H. Davoodi, I. Bar-on, Y. Suzuki, and A. Masuda: Smart Mater. Struct., 2002, vol. 11, pp. 218–29.10.1088/0964-1726/11/2/305 ↗
5. M. Wiegand, L. Marks, N. Sommer, and S. Böhm: Weld World., 2022, vol. 67(1), pp. 77–88.10.1007/s40194-022-01412-3 ↗
6. B. Li, L. Wang, B. Wang, D. Li, J.P. Oliveira, R. Cui, J. Yu, L. Luo, R. Chen, Y. Su, J. Guo, and H. Fu: Mater. Sci. Eng. A, 2022, vol. 843, 143135.10.1016/j.msea.2022.143135 ↗
7. S. Hellberg, J. Hummel, P. Krooß, T. Niendorf, and S. Böhm: Weld World, 2020, vol. 64, pp. 2159–68.10.1007/s40194-020-00991-3 ↗
8. C. Veiga, J.P. Davim, and A. Loureiro: Rev. Adv. Mater. Sci., 2012, vol. 32, pp. 133–48.
9. P. Kah, M. Shrestha, and J. Martikainen: AMM, 2013, vol. 440, pp. 269–76.10.4028/www.scientific.net/AMM.440.269 ↗
10. M.M. Quazi, M. Ishak, M.A. Fazal, A. Arslan, S. Rubaiee, A. Qaban, M.H. Aiman, T. Sultan, M.M. Ali, and S.M. Manladan: Opt. Laser Technol., 2020, vol. 126, 106090.10.1016/j.optlastec.2020.106090 ↗
11. T. Deepan Bharathi Kannan, T. Ramesh, and P. Sathiya: JOM, 2016, vol. 68, pp. 1227–45.10.1007/s11837-016-1836-y ↗
12. A. Ascari, E.P. Zapico, V. Dimatteo, and A. Fortunato: Procedia CIRP, 2022, vol. 111, pp. 770–73.10.1016/j.procir.2022.08.125 ↗
13. G.R. Joshi, V.J. Badheka, R.S. Darji, A.D. Oza, V.J. Pathak, D.D. Burduhos-Nergis, D.P. Burduhos-Nergis, G. Narwade, and G. Thirunavukarasu: Materials (Basel, Switzerland), 2022, vol. 15, p. 7234.10.3390/ma15207234 ↗
14. B. Ma, X. Gao, Y. Huang, P.P. Gao, and Y. Zhang: Opt. Laser Technol., 2023, vol. 167, 109721.10.1016/j.optlastec.2023.109721 ↗
15. C.A.F. Salvador, E.L. Maia, F.H. Costa, J.D. Escobar, and J.P. Oliveira: Sci. Data, 2022, vol. 9, p. 188.10.1038/s41597-022-01283-9 ↗
16. H. Hermawan, D. Ramdan, and J. R. P. Djuansjah: Biomedical Engineering - From Theory to Applications, Ed. by R. Fazel, InTech, 2011.
17. M. Peters, J. Kumpfert, C.H. Ward, and C. Leyens: Adv. Eng. Mater., 2003, vol. 5, pp. 419–27.10.1002/adem.200310095 ↗
18. L. Hu, Y. Xue, and F. Shi: Mater. Des., 2017, vol. 130, pp. 175–82.10.1016/j.matdes.2017.05.055 ↗
19. S. Datta, M.S. Raza, S. Kumar, and P. Saha: Adv. Mater. Process. Technol., 2018, vol. 4, pp. 614–25.
20. A. Shojaei Zoeram and S. Akbari Mousavi: Mater. Des., 2014, vol. 61, pp. 185–90.10.1016/j.matdes.2014.04.078 ↗
21. Z. Sun and J.C. Ion: J. Mater. Sci., 1995, vol. 33(3), pp. 4205–14.10.1007/BF00361499 ↗
22. R.M. Miranda, E. Assunção, R.J.C. Silva, J.P. Oliveira, and L. Quintino: Int. J. Adv. Manuf. Technol., 2015, vol. 81, pp. 1533–538.10.1007/s00170-015-7307-8 ↗
23. F.B. Teshome, B. Peng, J.P. Oliveira, and Z. Zeng: Mater. Manuf. Process., 2022, vol. 17, pp. 1942–954.
24. F.B. Teshome, B. Peng, J.P. Oliveira, S. Ao, W. Ke, F. Ge, and Z. Zeng: J. Mater. Eng. Perform., 2022, vol. 31, pp. 9777–790.10.1007/s11665-022-07064-0 ↗
25. F.B. Teshome, B. Peng, J.P. Oliveira, J. Shen, S. Ao, H. Li, L. Chen, C. Tan, X. Song, N. Zhou, and Z. Zeng: Mater. Des., 2023, vol. 228, 111845.10.1016/j.matdes.2023.111845 ↗
26. J.L. Murray: Bull. Alloy Phase Diagr., 1981, vol. 2, pp. 55–61.10.1007/BF02873704 ↗
27. M.J. Torkamany, F. Malek Ghaini, and R. Poursalehi: Mater. Des. (1980-2015), 2014, vol. 53, pp. 915–20.10.1016/j.matdes.2013.07.094 ↗
28. J.P. Oliveira, B. Panton, Z. Zeng, C.M. Andrei, Y. Zhou, R.M. Miranda, and F.B. Fernandes: Acta Mater., 2016, vol. 105, pp. 9–15.10.1016/j.actamat.2015.12.021 ↗
29. F. Ge, B. Peng, J.P. Oliveira, W. Ke, F.B. Teshome, Y. Li, and Z. Zeng: Metals, 2021, vol. 11, p. 1578.10.3390/met11101578 ↗
30. NDC® Nitinol Devices & Components, Superelastic Nitinol Alloys - Material Data Sheet. https://confluentmedical.com/wp-content/uploads/2016/01/Material-Data-Sheet-Superelastic.pdf. Accessed 15 Mar 2023
31. WHS Sondermetalle GmbH & Co. KG, Datenblatt Niob (NB, NbZr1). https://www.whs-sondermetalle.de/images/pdf/Nb-Niob.pdf. Accessed 15 Mar 2023
32. METALCOR GmbH, Datenblatt: Titan-Grade 4 (3.7065). http://www.metalcor.de/datenblatt/124/. Accessed 15 Mar 2023
33. N. Sommer, F. Stredak, M. Wiegand, and S. Böhm: Weld World, 2023, vol. 67, pp. 51–62.10.1007/s40194-022-01398-y ↗
34. M. Čalkovský, E. Müller, and D. Gerthsen: J. Microsc., 2023, vol. 289, pp. 32–47.10.1111/jmi.13148 ↗
35. K.P. Gupta: J Phs Eqil and Diff, 2008, vol. 29, pp. 194–97.10.1007/s11669-007-9016-y ↗
36. T. Guangxiang, G. Na, Z. Ming, L. Xionggang, Z. Jieyu, W. Guangxin, and L. Chonghe: TMS2013 Supplemental Proceedings, Ed. by TMS, John Wiley & Sons, Inc, Hoboken, NJ, 2013, pp. 361–70.10.1002/9781118663547.ch45 ↗