Origins of Strength, Strain Hardening, and Fracture in B2 Tailored Fe–0.8C–15Mn–10Al–5Ni Wt Pct Austenitic Low Density Steel
Source abstract
Abstract
Low density steel is a future hope for automotive industries with high strength–ductility, concerning passenger safety. To investigate the microstructural contributions, an as-cast Fe–0.8C–15Mn–10Al–5Ni wt pct alloy is fabricated by hot rolling, cold rolling, and thereafter annealing at 900 °C. The phase constituents are austenite (γ) as the matrix, B2 as the second phase, and B2 stringer bands originating from heat-treated deformed δ-ferrite in this high-Al-alloyed steel. The work analyzes the effective contribution of intra-granular B2 to yield strength (YS) through precipitation strengthening. The strain-hardening mechanism is rather complex. One group believes that strain incompatibility between softer γ and hard B2 localizes geometrically necessary dislocations at the phase interface for high-strain hardening in this alloy by back stress; whereas, the other considers planar glide with a restricted cross-slip behind the strain-hardening mechanism. The present work successfully resolves the debate by stating that strain hardening is a matrix’s characteristic, dominated by lattice friction stress and dislocation strengthening. The lattice friction of solute-enriched γ-matrix reduces the width of dislocation core merely to an interplanar spacing. Thereby, a difficulty in dislocation movement during tensile deformation results in extraordinary strain hardening for this steel through a constrained planar glide. The static recrystallization and polygonization of heat-treated cold-rolled B2 stringer band induces intergranular micro-cracks, and thereafter its annihilation as a stress concentration site for tensile failure without necking.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. G.S. Cole and A.M. Sherman: Mater. Charact., 1995, vol. 35, pp. 3–9.10.1016/1044-5803(95)00063-1 ↗
2. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
3. S. Chen, R. Rana, A. Haldar, and R.K. Ray: Prog. Mater Sci., 2017, vol. 89, pp. 345–91.10.1016/j.pmatsci.2017.05.002 ↗
4. M. Sinha, S. Ahad, A.K. Chaudhry, and S. Ghosh: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 809–17.10.1007/s11661-019-05568-4 ↗
5. S.H. Kim, H. Kim, and N.J. Kim: Nature, 2015, vol. 518, pp. 77–79.10.1038/nature14144 ↗
6. I. Gutierrez-Urrutia and D. Raabe: Mater. Sci. Technol., 2014, vol. 30, pp. 1099–1104.10.1179/1743284714Y.0000000515 ↗
7. B. Mishra, R. Sarkar, V. Singh, A. Mukhopadhyay, R.T. Mathew, V. Madhu, and M.J.N.V. Prasad: Materialia, 2021, vol. 20, 101198.10.1016/j.mtla.2021.101198 ↗
8. H. Kim: Scripta Mater., 2019, vol. 160, pp. 29–32.10.1016/j.scriptamat.2018.09.044 ↗
9. G. Park, C.H. Nam, A. Zargaran, and N.J. Kim: Scripta Mater., 2019, vol. 165, pp. 68–72.10.1016/j.scriptamat.2019.02.013 ↗
10. B. Laura and D.V. Aken: JOM, 2014, vol. 66, pp. 1770–84.10.1007/s11837-014-1068-y ↗
11. W. Korter and W. Ton: Arch. Eisenhuettenwes, 1933, vol. 365, p. 7.
12. J.L. Ham and J.R. Carin: Product. Eng., 1958, vol. 29, p. 51.
13. U. Prakash, R.A. Buckley, H. Jones, and C.M. Sellars: ISIJ Int., 1991, vol. 31, pp. 111–13.10.2355/isijinternational.31.1113 ↗
14. I. Baker and P.R. Munroe: Int. Mater. Rev., 1997, vol. 42, pp. 181–205.10.1179/imr.1997.42.5.181 ↗
15. K. Choi, C.H. Seo, H. Lee, S.K. Kim, J.H. Kwak, K.G. Chin, K.T. Park, and N.J. Kim: Scripta Mater., 2010, vol. 63, pp. 1028–31.10.1016/j.scriptamat.2010.07.036 ↗
16. Z.Q. Wu, H. Ding, X.H. An, D. Han, and X.Z. Liao: Mater. Sci. Eng. A, 2015, vol. 639, pp. 187–91.10.1016/j.msea.2015.05.002 ↗
17. M. Piston, L. Bartlett, K.R. Limmer, and D.M. Field: Metals, 2020, vol. 10, pp. 1–4.10.3390/met10101305 ↗
18. A. Rahnama, H. Kotadia, and S. Sridhar: Acta Mater., 2017, vol. 132, pp. 627–43.10.1016/j.actamat.2017.03.043 ↗
19. J.H. Hwang, T.T.T. Trang, O. Lee, G. Park, A. Zargaran, and N.J. Kim: Acta Mater., 2020, vol. 191, pp. 1–2.10.1016/j.actamat.2020.03.022 ↗
20. A. Rahanama, H. Kotadia, S. Clark, V. Janik, and S. Sridhar: Nat. Sci. Rep., 2018, vol. 8, pp. 1–2.
21. M.X. Yang, F.P. Yuan, Q.G. Xie, Y.D. Wang, E. Ma, and X.L. Wu: Acta Mater., 2016, vol. 109, pp. 213–22.10.1016/j.actamat.2016.02.044 ↗
22. B. Mishra, V. Singh, R. Sarkar, A. Mukhopadhyay, K. Gopinath, V. Madhu, and M.J.N.V. Prasad: Mater. Sci. Eng. A, 2022, vol. 842, 143095.10.1016/j.msea.2022.143095 ↗
23. D. Tourret, M.M. Francois, and A.J. Clarke: Comput. Mater. Sci., 2019, vol. 162, pp. 206–27.10.1016/j.commatsci.2019.02.031 ↗
24. B.G. Zhang, X.M. Zhang, and H.T. Liu: Mater. Charact., 2021, vol. 178, 111291.10.1016/j.matchar.2021.111291 ↗
25. W. Gąsior, A. Dębski, and Z. Moser: Intermetallics, 2012, vol. 24, pp. 99–105.10.1016/j.intermet.2012.02.001 ↗
26. C. Colinet, A. Bessoud, and A. Pasturel: J. Phys.: Condens. Matter, 1989, vol. 1, pp. 5837–45.
27. M.J. Yao, E. Welsch, D. Ponge, S.M.H. Haghighat, S. Sandlöbes, P. Choi, M. Herbig, I. Bleskov, T. Hickel, M. Lipinska-Chwalek, P. Shanthraj, C. Scheu, S. Zaefferer, B. Gault, and D. Raabe: Acta Mater., 2017, vol. 140, pp. 258–73.10.1016/j.actamat.2017.08.049 ↗
28. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Chapman & Hall, London, 1992.10.1007/978-1-4899-3051-4 ↗
29. G.E. Dieter: Mechanical Metallurgy, 3rd ed. Mc Graw-Hill, New York, 1986.
30. N. Bhowmik, S. Ghosh, S. Mandal, A. Haldar, and P.P. Chattopadhyay: CALPHAD, 2022, vol. 77, 102425.10.1016/j.calphad.2022.102425 ↗
31. X.G. Wang, C.H. Liu, B.B. He, C. Jiang, and M.X. Huang: Mater. Sci. Eng. A, 2019, vol. 761, 138050.10.1016/j.msea.2019.138050 ↗
32. B. Sun, Y. Ma, N. Vanderesse, R.S. Varanasi, W. Song, P. Bocher, D. Ponge, and D. Raabe: Acta Mater., 2019, vol. 178, pp. 10–25.10.1016/j.actamat.2019.07.043 ↗
33. S.D. Antolovich and R.W. Armstrong: Prog. Mater Sci., 2014, vol. 59, pp. 1–60.10.1016/j.pmatsci.2013.06.001 ↗
34. B.C. De Cooman, Y. Estrin, and S. Kyu: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗
35. K.M. Rahman, V.A. Vorontsov, and D. Dye: Acta Mater., 2015, vol. 89, pp. 247–57.10.1016/j.actamat.2015.02.008 ↗
36. S. Hu, Z. Zheng, W. Yang, and H. Yang: Steel Res. Int., 2022, vol. 93, pp. 1–3.
37. E. Welsch, D. Ponge, S.M.H. Haghighat, S. Sandlöbes, P. Choi, M. Herbig, S. Zaefferer, and D. Raabe: Acta Mater., 2016, vol. 116, pp. 188–99.10.1016/j.actamat.2016.06.037 ↗
38. I. Gutierrez-Urrutia and D. Raabe: Mater. Sci. Technol. (U.K.), 2014, vol. 30, pp. 1099–104.10.1179/1743284714Y.0000000515 ↗
39. P.P. Singh, S. Ghosh, and S. Mula: Mater. Sci. Eng. A, 2022, vol. 859, 144210.10.1016/j.msea.2022.144210 ↗
40. B. Clausen, T. Lorentzen, and T. Leffers: Acta Mater., 1998, vol. 46, pp. 3087–98.10.1016/S1359-6454(98)00014-7 ↗
41. M. Sinha, B. Syed, A. Karmakar, and S. Ghosh: Mater. Sci. Eng. A, 2020, vol. 787, 139519.10.1016/j.msea.2020.139519 ↗
42. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
43. D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, and J.E. Wittig: Acta Mater., 2015, vol. 100, pp. 178–90.10.1016/j.actamat.2015.08.030 ↗
44. X.L. Liu, Q.Q. Xue, W. Wang, L.L. Zhou, P. Jiang, H.S. Ma, F.P. Yuan, Y.G. Wei, and X.L. Wu: Materialia, 2019, vol. 7, 100376.10.1016/j.mtla.2019.100376 ↗
45. O. Bouaziz, S. Allain, and C. Scott: Scripta Mater., 2008, vol. 58, pp. 484–87.10.1016/j.scriptamat.2007.10.050 ↗
46. K. Tanaka and T. Mori: Acta Metall., 1970, vol. 18, pp. 931–41.10.1016/0001-6160(70)90020-9 ↗
47. S. Sarkar, Y. Gao, S. Huang, S. Bhattacharya, S. Patil, and R. Oruganti: Crystals, 2020, vol. 10, p. 306.10.3390/cryst10040306 ↗
48. Y.Y. Zhao and T.G. Nieh: Intermetallics, 2017, vol. 86, pp. 45–50.10.1016/j.intermet.2017.03.011 ↗
49. W. Guo, W. Dmowski, J.Y. Noh, P. Rack, P.K. Liaw, and T. Egami: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 1994–97.10.1007/s11661-012-1474-0 ↗
50. C. Lee, Y. Chou, G. Kim, M.C. Gao, K. An, J. Brechtl, C. Zhang, W. Chen, J.D. Poplawsky, G. Song, Y. Ren, Y.C. Chou, and P.K. Liaw: Adv. Mater., 2020, vol. 32, pp. 1–9.
51. G.E. Nevill: Effect of vibrations on the yield strength of a low carbon steel, Master’s thesis, The RICE Institute, Houstan, TX, 1957.
52. D. Roylance: The dislocation basis of yield and creep, https://web.mit.edu/course/3/3.11/www/modules/dn.pdf.
53. G.B. Olson and M. Cohen: Metall. Trans. A, 1976, vol. 7A, pp. 1897–904.
54. A.K. Patra, C.N. Athreya, S. Mandal, K.C. Hari Kumar, and V. Subramanya Sarma: Mater. Sci. Eng. A, 2021, vol. 810, pp. 140756–57.10.1016/j.msea.2021.140756 ↗
55. J. Nakano and P.J. Jacques: CALPHAD, 2010, vol. 34, pp. 167–75.10.1016/j.calphad.2010.02.001 ↗
56. A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40, pp. 3076–90.10.1007/s11661-009-0050-8 ↗
57. P.P. Singh, S. Mula, A. Malakar, and S. Ghosh: Mater. Today Commun., 2022, vol. 31, 103519.10.1016/j.mtcomm.2022.103519 ↗
58. M. Sinha, A. Karmakar, B. Syed, and S. Ghosh: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 3435–46.10.1007/s11661-020-05799-w ↗
59. T. Imao, S. Hiroshi, T. Tomo, and O. Chiaki: Thermomechanical Processing of High-Strength Low-Alloy Steels, 1st ed. Butterworth, London, 1988.
60. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗