journal article·2023-08

Effects of Niobium on Microstructure, Hardness and Wear Behavior for High-Speed Steel Rolls

Hao-nan Li, Shi-chao Han, Bo-han Zhang, Gui-ying Qiao, Jie-bing Liu, Fu-ren Xiao

Publisher page

Abstract

In order to refine the microstructure and improve the performance of high-speed steel (HSS) roll, the effects of Nb addition on the microstructure, hardness, and wear behavior were evaluated. The results show that adding Nb raises the precipitation temperature of NbC, which is even higher than the liquidus temperature. The NbC precipitates are accompanied by alloying elements such as Mo and V, which decreases the C and alloying element contents in the liquid phase. The variation of the content of C and alloying elements and refined austenite dendrites further refine the microstructure of the eutectic carbides of M6C, M2C, and Cr7C3. The refined as-cast microstructure increases the hardness of cast HSS rolls. However, a decrease in the content of C in austenite weakens the precipitation strengthening effect after heat treatment and results in a slight decrease of the hardness of HSS rolls with the increase of the addition of Nb. The refinement of microstructure, especially primary carbides, improves the continuity and uniformity of oxide film formed on the wear surface, which efficiently retards the wear of the matrix and improves the wear resistance of HSS rolls.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. C.K. Kim, Y.C. Kim, J.I. Park, S. Lee, N.J. Kim, and J.S. Yang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 87–97.10.1007/s11661-005-0141-0 ↗
2. G.Y. Deng, H.T. Zhu, A.K. Tieu, L.H. Su, M. Reid, L. Zhang, P.T. Wei, X. Zhao, H. Wang, J. Zhang, J.T. Li, T.D. Ta, Q. Zhu, C. Kong, and Q. Wu: Int. J. Mech. Sci., 2017, vol. 131–132, pp. 811–26.10.1016/j.ijmecsci.2017.08.024 ↗
3. L. Ma, W. Zhao, Z. Liang, X. Wang, L. Xie, L. Jiao, and T. Zhou: Mater. Sci. Eng. A, 2014, vol. 609, pp. 16–25.10.1016/j.msea.2014.04.100 ↗
4. L. Xu, S. Wei, F. Xiao, H. Zhou, G. Zhang, and J. Li: Wear, 2017, vol. 376–377, pp. 968–74.10.1016/j.wear.2017.01.021 ↗
5. A.S. Chaus: Met. Sci. Heat Treat., 2005, vol. 47, pp. 53–61.10.1007/s11041-005-0031-5 ↗
6. E. Franco, C.E. da Costa, J.C.G. Milan, S.A. Tsipas, and E. Gordo: Surf. Coat. Technol., 2020, vol. 384, p. 125306.10.1016/j.surfcoat.2019.125306 ↗
7. M. Kalantar, H. Najafi, and M.R. Afshar: Met. Mater. Int., 2018, vol. 25, pp. 229–37.10.1007/s12540-018-0154-z ↗
8. S. Kheirandish and A. Noorian: J. Iron Steel Res. Int., 2008, vol. 15, pp. 61–66.10.1016/S1006-706X(08)60145-4 ↗
9. H. Wang, L. Hou, J. Zhang, L. Lu, H. Cui, and J. Zhang: Mater. Charact., 2015, vol. 106, pp. 245–54.10.1016/j.matchar.2015.06.006 ↗
10. J. Yoo, W.M. Choi, B.J. Lee, G.Y. Kim, H. Kim, W.D. Choi, Y.J. Oh, and S. Lee: Met. Mater. Int., 2019, vol. 26, pp. 1506–14.10.1007/s12540-019-00418-9 ↗
11. Y. Sano, T. Hattori, and M. Haga: ISIJ Int., 1992, vol. 32, pp. 1194–1201.10.2355/isijinternational.32.1194 ↗
12. M.M. Serna and J.L. Rossi: Mater. Lett., 2009, vol. 63, pp. 691–93.10.1016/j.matlet.2008.11.035 ↗
13. A.S. Chaus and M. Dománková: J. Mater. Eng. Perform., 2012, vol. 22, pp. 1412–20.10.1007/s11665-012-0407-9 ↗
14. M. Boccalini and H. Goldenstein: Int. Mater. Rev., 2001, vol. 46, pp. 92–115.10.1179/095066001101528411 ↗
15. Y.W. Luo, H.J. Guo, X.L. Sun, J. Guo, and F. Wang: JOM, 2018, vol. 72, pp. 326–32.10.1007/s11837-018-3173-9 ↗
16. H. Zhou, J.G. Wang, and S.S. Jia: Acta Metall. Sin., 1997, vol. 33, pp. 838–43.
17. S. Kheirandish, Y.H.K. Kharrazi, and S. Mirdammadi: ISIJ Int., 1997, vol. 37, pp. 721–25.10.2355/isijinternational.37.721 ↗
18. H. Halfa, M. Eissa, K. El-Fawakhry, and T. Mattar: Steel Res. Int., 2012, vol. 83, pp. 32–42.10.1002/srin.201100094 ↗
19. S. Kheirandish: ISIJ Int., 2001, vol. 41, pp. 1502–09.10.2355/isijinternational.41.1502 ↗
20. M. Pellizzari, D. Cescato, and M.G. De Flora: Wear, 2009, vol. 267, pp. 467–75.10.1016/j.wear.2009.01.049 ↗
21. M. Pellizzari, A. Molinari, and G. Straffelini: Wear, 2005, vol. 259, pp. 1281–89.10.1016/j.wear.2004.12.006 ↗
22. L. Hao, H. Wu, D. Wei, X. Cheng, J. Zhao, S. Luo, L. Jiang, and Z. Jiang: Wear, 2017, vol. 376–377, pp. 1580–85.10.1016/j.wear.2017.02.037 ↗
23. H. Pourasiabi and J.D. Gates: Wear, 2022, vol. 498–499, p. 204312.10.1016/j.wear.2022.204312 ↗
24. W.H. Kan, G. Proust, V. Bhatia, L. Chang, K. Dolman, T. Lucey, X. Tang, and J. Cairney: Wear, 2019, vol. 420–421, pp. 149–62.10.1016/j.wear.2018.09.013 ↗
25. H. Pourasiabi and J.D. Gates: Mater. Des., 2021, vol. 212, p. 110261.10.1016/j.matdes.2021.110261 ↗
26. A.S.O. Pimentel, W.L. Guesser, W.J.R.C. Silva, P.D. Polabella, M. Woydt, and J. Burbank: Wear, 2019, vol. 440–441, p. 203065.10.1016/j.wear.2019.203065 ↗
27. J.P. Perdew and A. Zunger: Phys. Rev. B, 1981, vol. 23, pp. 5048–79.10.1103/PhysRevB.23.5048 ↗
28. M.D. Segall, P.J.D. Linda, M.J. Probert, C.J. Pickard, P.J. Hasnip, S.J. Clark, and M.C. Payne: J. Phys.: Condens. Matter, 2002, vol. 14, pp. 2717–44.
29. M. Kang and Y.K. Lee: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3365–74.10.1007/s11661-016-3536-1 ↗
30. J. Guo, L. Ai, T. Wang, Y. Feng, D. Wan, and Q. Yang: Mater. Sci. Eng. A, 2018, vol. 715, pp. 359–69.10.1016/j.msea.2018.01.024 ↗
31. X.F. Zhou, F. Fang, F. Li, and J.Q. Jiang: J. Mater. Sci., 2010, vol. 46, pp. 1196–1202.10.1007/s10853-010-4895-4 ↗
32. C. Vergne, C. Boher, R. Gras, and C. Levaillant: Wear, 2006, vol. 260, pp. 957–75.10.1016/j.wear.2005.06.005 ↗
33. A. Molinari, A. Tremea, M. Pellizzari, A. Biggi, and G. Corbo: Mater. Sci. Technol., 2013, vol. 18, pp. 1574–80.10.1179/026708302225007664 ↗
34. H.W. Zhu, W.J. Ke, Z.P. Zhao, S. Qin, F.R. Xiao, and B. Liao: Mater. Des., 2018, vol. 139, pp. 531–40.10.1016/j.matdes.2017.11.038 ↗
35. W.Y. Guo, X.Q. Hu, X.P. Ma, and D.Z. Li: Acta Metall. Sin., 2016, vol. 52, pp. 769–77.
36. W. Liu, Y. Guo, Y. Cao, J. Wang, Z. Hou, M. Sun, B. Xu, and D. Li: J. Alloys Compd., 2021, vol. 889, p. 161755.10.1016/j.jallcom.2021.161755 ↗
37. Y. Zhang, R. Song, Y. Wang, C. Cai, K. Guo, Z. Zhao, S. Songchuan, X. Wang, and K. Wang: Mater. Charact., 2022, vol. 183, p. 111611.10.1016/j.matchar.2021.111611 ↗
38. Y. Wang, S. Chu, B. Mao, H. Xing, J. Zhang, and B. Sun: J. Mater. Res. Technol., 2022, vol. 18, pp. 1521–33.10.1016/j.jmrt.2022.03.053 ↗
39. Y.W. Luo, H.J. Guo, X.L. Sun, J. Guo, and F. Wang: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5976–86.10.1007/s11661-018-4924-5 ↗
40. Y. Pan, Z. Pi, B. Liu, W. Xu, C. Zhang, X. Qu, and X. Lu: Mater. Sci. Eng. A, 2020, vol. 787, p. 139480.10.1016/j.msea.2020.139480 ↗
41. G.F. Sun, K. Wang, R. Zhou, A.X. Feng, and W. Zhang: Mater. Des., 2015, vol. 65, pp. 606–16.10.1016/j.matdes.2014.09.058 ↗
42. S. Zhou, Y. Shen, H. Zhang, and D. Chen: Chin. J. Mech. Eng., 2014, vol. 28, pp. 140–47.10.3901/CJME.2014.0620.116 ↗
43. X. Song, Y. Wang, X. Zhao, J. Zhang, Y. Li, Y. Wang, and Z. Chen: J. Alloys Compd., 2022, vol. 911, p. 164959.10.1016/j.jallcom.2022.164959 ↗
44. Q. Zhu, H.T. Zhu, A.K. Tieu, M. Reid, and L.C. Zhang: Corros. Sci., 2010, vol. 52, pp. 2707–15.10.1016/j.corsci.2010.04.027 ↗
45. F. Delaunois, V.I. Stanciu, A. Megret, and M. Sinnaeve: Int. J. Adv. Manuf. Technol., 2021, vol. 119, pp. 677–89.10.1007/s00170-021-08031-0 ↗
46. L. Xu, S. Wei, J. Xing, and R. Long: Tribol. Int., 2014, vol. 70, pp. 34–41.10.1016/j.triboint.2013.09.021 ↗