Tools for the Assessment of the Laser Printability of Nickel Superalloys
Source abstract
Abstract
Additive Manufacturing (AM) is a revolutionary technology with great interest from the aerospace sector, due to the capability of manufacturing complex geometries and repairing of damaged components. A significant volume of research is being conducted with high-temperature alloys, particularly nickel superalloys. However, the high-temperature properties of nickel superalloys are derived from the high fraction of strengthening precipitates, which in turn, lead to poor amenability to additive manufacture. Various cracking modes are common in nickel superalloys, primarily as a result of the high level of alloying and the extreme thermal conditions experienced in AM. Herein, crack susceptibility calculations from literature were critically analyzed and combined, resulting in a simple failure susceptibility that correlates with literature. Currently, the range of alloys which have been tested in AM and reported in literature is limited and lacks a standard methodology, making accurate assessment of printability difficult. Scheil solidification calculations were performed, testing solute trapping (ST) and back diffusion models for both the cooling rates associated with laser powder bed fusion (L-PBF) and laser-directed energy deposition (L-DED). The results confirm that L-PBF exhibits cooling rates that can result in ST, unlike in L-DED. These differences mean that alloys cannot be developed more generally for AM, but must be developed with a specific AM process in mind.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. W.T. Carter and M.G. Jones: Proc. SFF Symp., 1993, pp. 51–59.
2. L.N. Carter, M.M. Attallah, and R.C. Reed: Superalloys 2012, 2012, pp. 577–86.10.1002/9781118516430.ch64 ↗
3. J.F.S. Markanday: Mater. Sci. Technol., 2022, https://doi.org/10.1080/02670836.2022.2068759.10.1080/02670836.2022.2068759 ↗
4. H.L. Wei, T. Mukherjee, W. Zhang, J.S. Zuback, G.L. Knapp, A. De, and T. DebRoy: Prog. Mater. Sci., 2020, https://doi.org/10.1016/j.pmatsci.2020.100703.10.1016/j.pmatsci.2020.100703 ↗
5. T. Mukherjee, J.S. Zuback, A. De, and T. DebRoy: Sci. Rep., 2016, vol. 6, p. 19717.10.1038/srep19717 ↗
6. L. Johnson, M. Mahmoudi, B. Zhang, R. Seede, J.T. Maier, H.J. Maier, I. Karaman, and A. Elwany: Acta Mater., 2019, vol. 176, pp. 1–25.10.1016/j.actamat.2019.07.005 ↗
7. American Welding Society (AWS): Standard Welding Terms and Definitions, AWS, Miami, 2010.
8. R.D. Campbell and D.W. Walsh: ASM Handbook: Welding, Brazing, and Soldering, vol. 6, ASM, Metals Park, 1993, pp. 603–13.10.31399/asm.hb.v06.a0001431 ↗
9. J.N. DuPont, J.C. Lippold, and S.D. Kiser: Welding Metallurgy and Weldability of Nickel-Base Alloys, Wiley, Hoboken, 2009.10.1002/9780470500262 ↗
10. E.F. Nippes and W.F. Savage: Weld. J., 1949, vol. 28, pp. 534–46.
11. S.D. Kiser: ASM Handbook: Welding, Brazing, and Soldering, vol. 6, ASM, Metals Park, 1993.
12. H.N. Moosavy, M.R. Aboutalebi, S.H. Seyedein, M. Khodabakhshi, and C. Mapelli: Int. J. Miner. Metall. Mater., 2013, vol. 20, pp. 1183–191.10.1007/s12613-013-0853-x ↗
13. D. Dye, O. Hunziker, and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 683–97.10.1016/S1359-6454(00)00361-X ↗
14. N.L. Richards and M.C. Chaturvedi: Int. Mater. Rev., 2000, vol. 45, pp. 109–29.10.1179/095066000101528331 ↗
15. M. Durand-Charre: The Microstructure of Superalloys, Gordon and Breach Science Publishers, London, 1997.
16. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, 2nd ed. ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
17. R.C. Reed: The Superalloys Fundamentals and Applications, vol. 9780521859042, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
18. A.T. Clare, R.S. Mishra, M. Merklein, H. Tan, I. Todd, L. Chechik, J. Li, and M. Bambach: J. Mater. Process. Technol., 2021, https://doi.org/10.1016/j.jmatprotec.2021.117358.10.1016/j.jmatprotec.2021.117358 ↗
19. Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J.W.G. Clark, A.A.N. Németh, D.G. McCartney, and R.C. Reed: Acta Mater., 2021, vol. 202, pp. 417–36.10.1016/j.actamat.2020.09.023 ↗
20. B.D. Conduit, T. Illston, S. Baker, D.V. Duggappa, S. Harding, H.J. Stone, and G.J. Conduit: Mater. Des., 2019, vol. 168, 107644.10.1016/j.matdes.2019.107644 ↗
21. M.M. Attallah, R. Jennings, X. Wang, and L.N. Carter: MRS Bull., 2016, vol. 41, pp. 758–64.10.1557/mrs.2016.211 ↗
22. H. Naffakh Moosavy, M.R. Aboutalebi, S.H. Seyedein, and C. Mapelli: Mater. Charact., 2013, vol. 82, pp. 41–9.10.1016/j.matchar.2013.04.018 ↗
23. Q. Han, R. Mertens, M.L. Montero-Sistiaga, S. Yang, R. Setchi, K. Vanmeensel, B. Van Hooreweder, S.L. Evans, and H. Fan: Mater. Sci. Eng. A, 2018, vol. 732, pp. 228–39.10.1016/j.msea.2018.07.008 ↗
24. Oxmet Technologies: ABD-900AM, Oxmet Technologies, Oxon, 2021.
25. T.M. Pollock, A.J. Clarke, and S.S. Babu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6000–019.10.1007/s11661-020-06009-3 ↗
26. M.C. Hardy, C. Argyrakis, H.S. Kitaguchi, A.S. Wilson, R.C. Buckingham, K. Severs, S. Yu, C. Jackson, E.J. Pickering, S.C.H. Llewelyn, C. Papadaki, K.A. Christofidou, P.M. Mignanelli, A. Evans, D.J. Child, H.Y. Li, N.G. Jones, C.M.F. Rae, P. Bowen, and H.J. Stone: Proc. 14th Int. Symp. Superalloys. https://doi.org/10.1007/978-3-030-51834-9_210.1007/978-3-030-51834-9_2 ↗
27. Haynes International: HAYNES® 282® Alloy Brochure, Haynes International, Kokomo, 2021.
28. ATI: ATI 718Plus® Technical Data Sheet, ATI, 2013.
29. M. Prager and C.S. Shira: WRC Bull., 1968, vol. 6, pp. 1–55.
30. M.H. Haafkens and J.H.G. Matthey: Maintenance in Service of High Temperature Parts. Agard Conference Proceedings No. 317, vol. 317, 1981.
31. B. Wahlmann, D. Leidel, M. Markl, and C. Körner.
32. N. Kwabena Adomako, N. Haghdadi, and S. Primig: Mater. Des., 2022, vol. 223, p. 111245.10.1016/j.matdes.2022.111245 ↗
33. S. Catchpole-Smith, N. Aboulkhair, L. Parry, C. Tuck, I.A. Ashcroft, and A. Clare: Addit. Manuf., 2017, vol. 15, pp. 113–22.
34. M.B. Henderson, D. Arrell, R. Larsson, M. Heobel, and G. Marchant: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 13–21.10.1179/136217104225017099 ↗
35. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
36. N. Wang, S. Mokadem, M. Rappaz, and W. Kurz: Acta Mater., 2004, vol. 52, pp. 3173–182.10.1016/j.actamat.2004.03.047 ↗
37. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1511–519.10.1007/s11661-007-9169-7 ↗
38. N. Coniglio and C.E. Cross: Int. Mater. Rev., 2013, vol. 58, pp. 375–97.10.1179/1743280413Y.0000000020 ↗
39. T.W. Clyne and G.J. Davies: in Solidification and Casting of Metals, Sheffield, 1977, pp. 275–78.
40. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
41. E.A. Ott, J. Groh, and H. Sizek: Proc. Int. Symp. Superalloys Var. Deriv., 2005, pp. 35–45.10.7449/2005/Superalloys_2005_35_45 ↗
42. L.N. Carter, C. Martin, P.J. Withers, and M.M. Attallah: J. Alloys Compd., 2014, vol. 615, pp. 338–47.10.1016/j.jallcom.2014.06.172 ↗
43. G.A. Young, T.E. Capobianco, M.A. Penik, B.W. Morris, and J.J. McGee: Weld. J., 2008, vol. 87, pp. 31S-43S.
44. C.T. Sims, N.S. Stoloff, and W.C. Hagel: Superalloys II: High-Temperature Materials for Aerospace and Industrial Power, Wiley, Hoboken, 1987.
45. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
46. W. Kurz and R. Trivedi: Mater. Sci. Eng. A, 1994, vol. 179–180, pp. 46–51.10.1016/0921-5093(94)90162-7 ↗
47. R. Deffley: University of Sheffield, 2012.
48. J. Hunt, F. Derguti, and I. Todd: Ironmak. Steelmak., 2014, vol. 41, pp. 254–56.10.1179/0301923314Z.000000000269 ↗
49. R.L. Dreshfield: NASA Tech. Note, 1970.
50. H.J. Murphy, C.T. Sims, and A.M. Beltran: Superalloys 1968, 1968, pp. 47–66.10.1002/j.1538-7305.1968.tb02481.x ↗
51. C.L. Frederick: University of Tennessee, Knoxville, 2018.
52. F. Tancret and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2003, vol. 19, p. 291.10.1179/026708303225009797 ↗
53. R.C. Reed, T. Tao, and N. Warnken: Acta Mater., 2009, vol. 57, pp. 5898–913.10.1016/j.actamat.2009.08.018 ↗
54. M.A. Charpagne, K.V. Vamsi, Y.M. Eggeler, S.P. Murray, C. Frey, S.K. Kolli, and T.M. Pollock: Acta Mater., 2020, vol. 194, pp. 224–35.10.1016/j.actamat.2020.05.003 ↗
55. S.P. Murray, K.M. Pusch, A.T. Polonsky, C.J. Torbet, G.G.E. Seward, N. Zhou, S.A.J. Forsik, P. Nandwana, M.M. Kirka, R.R. Dehoff, W.E. Slye, and T.M. Pollock: Nat. Commun., 2020, vol. 11, pp. 1–1.10.1038/s41467-019-13993-7 ↗
56. T.M. Smith, A.C. Thompson, T.P. Gabb, C.L. Bowman, and C.A. Kantzos: Sci. Rep., 2020, vol. 10, pp. 1–9.10.1038/s41598-019-56847-4 ↗
57. F. Markanday, G. Conduit, B. Conduit, J. Pürstl, K. Christofidou, L. Chechik, G. Baxter, C. Heason, and H. Stone: Data-Centric Eng., 2022, https://doi.org/10.1017/dce.2022.31.10.1017/dce.2022.31 ↗
58. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD Comput. Coupling Phase Diagrams Thermochem., 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
59. J.N. Ghoussoub, Y.T. Tang, W.J.B. Dick-Cleland, A.A.N. Németh, Y. Gong, D.G. McCartney, A.C.F. Cocks, and R.C. Reed: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 962–83.10.1007/s11661-021-06568-z ↗
60. S. Griffiths, H. Ghasemi Tabasi, T. Ivas, X. Maeder, A. De Luca, K. Zweiacker, R. Wróbel, J. Jhabvala, R.E. Logé, and C. Leinenbach: Addit. Manuf., 2020, https://doi.org/10.1016/j.addma.2020.101443.10.1016/j.addma.2020.101443 ↗
61. J. Xu, P. Kontis, R.L. Peng, and J. Moverare: Acta Mater., 2022, vol. 240, 118307.10.1016/j.actamat.2022.118307 ↗
62. N. Zhou, A.D. Dicus, S.A.J. Forsik, T. Wang, G.A. Colombo, and M.E. Epler: in Superalloys 2020, Springer, 2020, pp. 1046–54.10.1007/978-3-030-51834-9_102 ↗
63. J.U. Park, S.Y. Jun, B.H. Lee, J.H. Jang, B.S. Lee, H.J. Lee, J.H. Lee, and H.U. Hong: Addit. Manuf., 2022, vol. 52, 102680.
64. H. Yu, J. Liang, Z. Bi, J. Li, and W. Xu: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 1945–954.10.1007/s11661-022-06653-x ↗
65. Y. Sato: Jpn. J. Appl. Phys., 2011, vol. 50, pp. 15–8.
66. Y. Sato, K. Sugisawa, D. Aoki, and T. Yamamura: 17th Eur. Conf. Thermophys. Prop., 2005, pp. 1–5.
67. T. Illston: Int. Conf. Addit. Manuf. 2012, 2012.
68. D. Liu, J.C. Lippold, J. Li, S.R. Rohklin, J. Vollbrecht, and R. Grylls: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4454–469.10.1007/s11661-014-2397-8 ↗
69. A.J. Pinkerton, M. Karadge, W. Ul Haq Syed, and L. Li: J. Laser Appl., 2006, vol. 18, pp. 216–26.10.2351/1.2227018 ↗
70. K.A. Mumtaz, P. Erasenthiran, and N. Hopkinson: J. Mater. Process. Technol., 2008, vol. 195, pp. 77–87.10.1016/j.jmatprotec.2007.04.117 ↗
71. J. Grodzki, N. Hartmann, R. Rettig, E. Affeldt, and R.F. Singer: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2914–926.10.1007/s11661-016-3416-8 ↗