journal article·2022-04

Evolution of Texture, Grain Boundary Constitution, Strain, and Corrosion Behavior of Electrodeposited Ni–P Coatings as a Function of Deposition Current Density

Atul P. Meshram, Abhay Gupta, Chandan Srivastava

Publisher page

Abstract

Ni–P coatings with low P content (P wt pct < 1.0) were fabricated at different applied current densities of electrodeposition ranging from 5 to 80 mA cm−2. Electrochemical analysis revealed that the Ni–P coating deposited at 60 mA cm−2 exhibited the highest corrosion resistance, while the coating deposited at 5 mA cm−2 exhibited the lowest corrosion resistance. The corrosion analysis results were correlated with the electron backscatter diffraction analysis. Low surface free energy (100) texture, low average grain size, and a high fraction of Σ3 low-energy grain boundaries contributed to the superior corrosion resistance of the 60 mA cm−2 coating. A higher corrosion rate in the case of 5 mA cm−2 coating was primarily due to higher energy surface texture and larger grain size distribution.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D.H. Jeong, U. Erb, K.T. Aust, and G. Palumbo: Scr. Mater., 2003, vol. 48, pp. 1067–72.10.1016/S1359-6462(02)00633-4 ↗
2. P. Peelers, G.V.D. Hoorn, T. Daenen, A. Kurowski, and G. Staikov: Electrochim. Acta., 2001, vol. 47, pp. 161–69.10.1016/S0013-4686(01)00546-1 ↗
3. A.P. Ordine, S.L. Díaz, I.C.P. Margarit, O.E. Barcia, and O.R. Mattos: Electrochim. Acta., 2006, vol. 51, pp. 1480–86.10.1016/j.electacta.2005.02.129 ↗
4. J. Lin and C. Chou: Surf. Coat. Technol., 2019, vol. 368, pp. 126–37.10.1016/j.surfcoat.2019.04.009 ↗
5. M. Crobu, A. Scorciapino, B. Elsener, and A. Rossi: Electrochim. Acta., 2008, vol. 53, pp. 3364–70.10.1016/j.electacta.2007.11.071 ↗
6. A.A. Zuleta, E. Correa, J.G. Castaño, F. Echeverría, A. Baron-wieche, P. Skeldon, and G.E. Thompson: Surf. Coatings Technol., 2017, vol. 321, pp. 309–20.10.1016/j.surfcoat.2017.04.059 ↗
7. C.A. Vlaic, M. Kurniawan, R. Peipmann, C.C. Lalău, M. Stich, U. Schmidt, and A. Bund: Surf. Coatings Technol., 2020, vol. 386, p. 125470.10.1016/j.surfcoat.2020.125470 ↗
8. A. Lelevic and F.C. Walsh: Surf. Coatings Technol., 2019, vol. 369, pp. 198–220.10.1016/j.surfcoat.2019.03.055 ↗
9. B.P. Daly and F.J. Barry: Int. Mater. Rev., 2003, vol. 48, pp. 326–38.10.1179/095066003225008482 ↗
10. A.M. Pillai, A. Rajendra, and A.K. Sharma: J. Coatings Technol. Res., 2012, vol. 9, pp. 785–97.10.1007/s11998-012-9411-0 ↗
11. E. Bredael, B. Blanpain, J.P. Celis, and J.R. Roos: J. Electrochem. Soc., 1994, vol. 141, pp. 294–99.10.1149/1.2054703 ↗
12. B. Bahadormanesh and M. Ghorbani: Appl. Surf. Sci., 2018, vol. 442, pp. 275–87.10.1016/j.apsusc.2018.02.127 ↗
13. H.T. Padmaganesan, S. Banthia, V. Dihari, S. Chhangani, and M.J.N.V. Prasad: Mater. Sci. Eng. A., 2021, vol. 804, p. 140735.10.1016/j.msea.2021.140735 ↗
14. M. Czagány, P. Baumli, and G. Kaptay: Appl. Surf. Sci., 2017, vol. 423, pp. 160–69.10.1016/j.apsusc.2017.06.168 ↗
15. N.N.A. Azli, N.F.M. Amin, S.T. Oluhende, S.N.A. Mohamad, and N.A. Fadil: Mater. Today Proc., 2019, vol. 39, pp. 1071–76.10.1016/j.matpr.2020.06.087 ↗
16. C. Sun, J. Li, S. Shuang, H. Zeng, and J. Luo: Corros. Sci., 2018, vol. 134, pp. 23–37.10.1016/j.corsci.2018.01.041 ↗
17. J. Wang, W. Lei, Y. Deng, Z. Xue, H. Qian, W. Liu, and X. Li: Surf. Coatings Technol., 2019, vol. 358, pp. 765–74.10.1016/j.surfcoat.2018.09.061 ↗
18. Y. Li, K. Zhang, M. Zhang, Y. Zhang, T. Wu, and H. Zhao: Int. J. Electrochem. Sci., 2020, vol. 15, pp. 2752–65.10.20964/2020.03.02 ↗
19. D. Umapathi, A. Devaraju, C. Rathinasuriyan, and A. Raji: Mater. Today Proc., 2020, vol. 22, pp. 1038–42.10.1016/j.matpr.2019.11.283 ↗
20. Y.J. Zhou, Z.H. Huang, and T.T. Nguyen: Surf. Coat. Technol., 2017, vol. 320, pp. 23–27.10.1016/j.surfcoat.2017.02.017 ↗
21. Y. He, W.T. Sun, S.C. Wang, P.A.S. Reed, and F.C. Walsh: Electrochim. Acta., 2017, vol. 245, pp. 872–82.10.1016/j.electacta.2017.05.166 ↗
22. D.K. Mahalingam and P. Bera: Surf. Interfaces., 2021, vol. 22, p. 100769.10.1016/j.surfin.2020.100769 ↗
23. Y. Deng, Y. Yang, L. Ge, W. Yang, and K. Xie: Appl. Surf. Sci., 2017, vol. 425, pp. 261–71.10.1016/j.apsusc.2017.07.021 ↗
24. D. Gilberto, A. Diaz, A. Barba, J. Jairo, O. Florez, J. Rafael, G. Parra, J. Cervantes, I. Angarita, A. Covelo, M. Ángel, and H. Gallegos: Data Br., 2020, vol. 32, p. 106159.10.1016/j.dib.2020.106159 ↗
25. Z.H. Huang, Y.J. Zhou, and T.T. Nguyen: Surf. Coatings Technol., 2019, vol. 364, pp. 323–29.10.1016/j.surfcoat.2019.01.060 ↗
26. A. Bahramian, M. Eyraud, F. Vacandio, and P. Knauth: Surf. Coatings Technol., 2018, vol. 345, pp. 40–52.10.1016/j.surfcoat.2018.03.075 ↗
27. J. Naderi and A.A.D. Sarhan: Meas. J. Int. Meas. Confed., 2019, vol. 139, pp. 490–97.10.1016/j.measurement.2019.03.027 ↗
28. S.T. Chung, Y.C. Chuang, S.Y. Chiu, and W.T. Tsai: Electrochim. Acta., 2011, vol. 58, pp. 571–77.10.1016/j.electacta.2011.10.018 ↗
29. W.E.G. Hansal, G. Sandulache, R. Mann, and P. Leisner: Electrochim. Acta., 2013, vol. 114, pp. 851–58.10.1016/j.electacta.2013.08.182 ↗
30. J. Xian, Z. Shen, Z. Zhang, H. Wu, M. Jin, and M. Jiang: Coatings., 2021, vol. 11(5), p. 527.10.3390/coatings11050527 ↗
31. M.S. Safavi and A. Rasooli: Surf. Coatings Technol., 2019, vol. 372, pp. 252–59.10.1016/j.surfcoat.2019.05.058 ↗
32. T.R. Tamilarasan, U. Sanjith, M.S. Shankar, and G. Rajagopal: Wear., 2017, vol. 390–391, pp. 385–91.10.1016/j.wear.2017.09.004 ↗
33. M.H. Sliem, K. Shahzad, V.N. Sivaprasad, and R.A. Shakoor: Surf. Coat. Technol., 2020, vol. 403, p. 126340.10.1016/j.surfcoat.2020.126340 ↗
34. D. Gilberto, A. Diaz, A. Barba, J. Jairo, O. Florez, J. Rafael, G. Parra, J. Cervantes, I. Angarita, A. Covelo, M. Ángel, and H. Gallegos: Mater. Lett., 2020, vol. 275, p. 128159.10.1016/j.matlet.2020.128159 ↗
35. X. Yang-tao, D. Yu-jie, Z. Wei, and X. Tian-dong: Surf. Coatings Technol., 2017, vol. 330, pp. 170–77.10.1016/j.surfcoat.2017.09.078 ↗
36. X. Fu, F. Wang, X. Chen, J. Lin, and H. Cao: RSC Adv., 2020, vol. 10, pp. 34167–76.10.1039/D0RA06735K ↗
37. C. Liu, Q. Bi, A. Leyland, and A. Matthews: Corros. Sci., 2003, vol. 45, pp. 1243–56.10.1016/S0010-938X(02)00213-5 ↗
38. C. Liu, Q. Bi, A. Leyland, and A. Matthews: Corros. Sci., 2003, vol. 45, pp. 1257–73.10.1016/S0010-938X(02)00214-7 ↗
39. Y.K. Wei, Y.J. Li, Y. Zhang, X.T. Luo, and C.J. Li: Corros. Sci., 2018, vol. 138, pp. 105–15.10.1016/j.corsci.2018.04.018 ↗
40. A.P. Meshram, A. Gupta, and C. Srivastava: Philos. Mag., 2021, vol. 101, pp. 2541–59.10.1080/14786435.2021.1977864 ↗
41. M.D. Sangid, T. Ezaz, H. Sehitoglu, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 283–96.10.1016/j.actamat.2010.09.032 ↗