Revealing the Unexpected Two Variant Pairing Shifts Due to Temperature Change in a Single Bainitic Medium Carbon Steel
Source abstract
Abstract
Abstract The microstructure of a low alloy medium carbon bainitic steel, austempered in the temperature range 275 °C to 450 °C has been investigated by detailed electron backscatter diffraction and variant pairing analysis. It is observed that the variant pairing tendency has two distinct changes with varying temperature. At low temperature V1-V6 is the most frequent, whereas V1-V2 is the most frequent at intermediate temperature and at the highest temperature, V1-V4 dominates. This is distinct from the literature on low carbon steel where only two dominant variants pairs, related to the common distinction of bainite into lower and upper bainite, are typically reported. The change of the variant pairing in bainite also has many similarities with the change of variant pairing in martensite when its carbon content changes. Another observation is that the morphological orientation of cementite in the bainite has a strong relation with the variant pairing at lower austempering temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. M. Hillert: Jernkontorets Ann., 1957, vol. 141, pp. 757–89. .
2. A. Borgenstam, M. Hillert, and J. Ågren: Acta Mater., 2009, vol. 57, pp. 3242–52. .10.1016/j.actamat.2009.03.026 ↗
3. A. Borgenstam, P. Hedstroem, M. Hillert, P. Kolmskog, A. Stormvinter, and J. Aagren: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 1558–74. .10.1007/s11661-010-0539-1 ↗
4. P. Kolmskog, PhD thesis, Royal Institute of Technology, SWE, 2013.
5. M. Hillert, L. Höglund, and J. Ågren: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 3693–700. .10.1007/s11661-004-0275-5 ↗
6. H.I. Aaronson, W.T. Reynolds Jr., G.J. Shiflet, and G. Spanos: Metall. Mater. Trans. A., 1990, vol. 21A, pp. 1343–80. .10.1007/BF02672557 ↗
7. L. Fielding: University of Cambridge, UK, 2013.
8. L.C.D. Fielding: Mater. Sci. Technol., 2013, vol. 29, pp. 383–99. .10.1179/1743284712Y.0000000157 ↗
9. F.G. Caballero, C. Garcia-Mateo, M.J. Santofimia, M.K. Miller, and C. Garcia de Andres: Acta Mater., 2008, vol. 57, pp. 8–17. .10.1016/j.actamat.2008.08.041 ↗
10. F.G. Caballero, M.K. Miller, and C. Garcia-Mateo: Acta Mater., 2010, vol. 58, pp. 2338–43. .10.1016/j.actamat.2009.12.020 ↗
11. H.K.D.H. Bhadeshia and D.V. Edmonds: Acta Metall., 1980, vol. 28, pp. 1265–73. .10.1016/0001-6160(80)90082-6 ↗
12. F.G. Caballero, M.K. Miller, and C. Garcia-Mateo: Mater. Chem. Phys., 2014, vol. 146, pp. 50–7. .10.1016/j.matchemphys.2014.02.041 ↗
13. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 1444–58. .10.1007/s11661-016-3902-z ↗
14. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 5294–303. .10.1007/s11661-017-4316-2 ↗
15. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 1425–43. .10.1007/s11661-016-3903-y ↗
16. M. Hillert: Interscience, NY, 1962, 197-237.
17. H. I. Aaronson, The Proeutectoid Ferrite and the Proeutectoid Cementite Reaction, 1962, 387.
18. J. Yin, M. Hillert, and A. Borgenstam: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 4006–24. .10.1007/s11661-017-4208-5 ↗
19. R. Mehl: ASM, Metals Park, OH, 1939, 1.
20. Y. Ohmori, H. Ohtani, and T. Kunitake: Trans. Iron Steel Inst. Jpn., 1971, vol. 11, pp. 250–9. .10.2355/isijinternational1966.11.250 ↗
21. M. Takahashi and H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, pp. 592–603. .10.1179/mst.1990.6.7.592 ↗
22. G. Spanos, H. Fang, and H. Aaronson: Metall. Mater. Trans. A., 1990, vol. 21A, pp. 1381–90. .10.1007/BF02672558 ↗
23. S. Matas and R. Hehemann: Trans. Metall. Soc. AIME., 1961, vol. 221, pp. 179–85. .
24. T. Furuhara, in Phase Transformations in Steels, eds. E. Pereloma and D. V. Edmonds, Woodhead Publishing, 2012, pp. 417-35.10.1533/9780857096104.3.417 ↗
25. F. B. Pickering, Transformation and Hardenability in Steels, Climax Molybdenum Company 1967.
26. G. Kurdjumow and G. Sachs: Z. Phys., 1930, vol. 64, pp. 325–43. .10.1007/BF01397346 ↗
27. A.B. Greninger and A.R. Troiano: JOM., 1949, vol. 1, pp. 590–8. .10.1007/BF03398900 ↗
28. Z. Nishiyama: Sci. Rep. Tohoku Univ., 1934, vol. 23, p. 637. .
29. G. Wassermann, Über den Mechanismus der α-γ Umwandlung des Eisens, Verlag Stahleisen, 1935.
30. G.R. Purdy and M. Hillert: Acta Metall., 1984, vol. 32, pp. 823–8. .10.1016/0001-6160(84)90018-X ↗
31. T. Moritani, N. Miyajima, T. Furuhara, and T. Maki: Scr. Mater., 2002, vol. 47, pp. 193–9. .10.1016/S1359-6462(02)00128-8 ↗
32. S. Morito, H. Tanaka, and R. Konishi: T. Furuhara and Maki. Acta Mater., 2003, vol. 51, pp. 1789–99. .10.1016/S1359-6454(02)00577-3 ↗
33. A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedström, and A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265–74. .10.1016/j.actamat.2012.09.046 ↗
34. T. Kaneshita, G. Miyamoto, and T. Furuhara: Acta Mater., 2017, vol. 127, pp. 368–78. .10.1016/j.actamat.2017.01.035 ↗
35. T. Furuhara, H. Kawata, S. Morito and T. Maki: Mater. Sci. Eng., A, 2006, 431, 228-36.10.1016/j.msea.2006.06.032 ↗
36. H. Kawata, K. Sakamoto, T. Moritani, S. Morito, T. Furuhara, and T. Maki: Mater. Sci. Eng. A., 2006, vol. 438A, pp. 140–4. .10.1016/j.msea.2006.02.175 ↗
37. A. Ståhlkratnz, P. Hedström, N. Sarius, H.-Å. Sundberg, S. Kahl, M. Thuvander, and A. Borgenstam: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 6470–81. .10.1007/s11661-020-06030-6 ↗
38. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024–37. .10.1107/S0021889808030112 ↗
39. F. Bachmann, R. Hielscher and H. Schaeben, Solid State Phenom., 2010, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
40. T. Nyyssönen, M. Isakov, P. Peura, and V.-T. Kuokkala: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 2587–90. .10.1007/s11661-016-3462-2 ↗
41. S. M. Van Dongen, PhD thesis, Utrecht University, NL, 2000.
42. E. Gomes and L. Kestens, in IOP conference series: materials science and engineering, IOP Publishing, 2015, p. 012059.10.1088/1757-899X/82/1/012059 ↗
43. T. Nyyssönen, PhD thesis, Tampere University of Technology, FI, 2017.
44. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2010, vol. 58, pp. 6393–403. .10.1016/j.actamat.2010.08.001 ↗
45. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 1139–48. .10.1016/j.actamat.2011.11.018 ↗
46. N. Takayama, G. Miyamoto, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 2387–96. .10.1016/j.actamat.2011.12.018 ↗
47. S. Morito, X. Huang, T. Furuhara, T. Maki, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323–31. .10.1016/j.actamat.2006.07.009 ↗
48. S. Morito, A. Pham, T. Hayashi, and T. Ohba: Mater. Today., 2015, vol. 2, pp. S913–6. .
49. G. Srinivasan and C. Wayman: Acta Metall., 1968, vol. 16, pp. 621–36. .10.1016/0001-6160(68)90136-3 ↗