Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening
Source abstract
Abstract
Abstract A forced flow was experimentally shown to influence the solidification microstructure of metal alloys by modifying the coarsening/ripening law. In some technical alloys (AlSi7Fe1), this flow effect can also be significantly suppressed due to the formation of intermetallic precipitates (β-Al5FeSi) that can block the flow in the mushy region. The forced flow was induced by a rotating magnetic field (RMF). Herein, a three-phase volume-average-based solidification model is introduced to reproduce the above experiment. The three phases are the melt, the primary solid phase of columnar dendrites, and the second solid phase of intermetallic precipitates. The dynamic precipitation of the intermetallic phase is modelled, and its blocking effect on the flow is considered by a modified permeability. Dendrite coarsening, which influences the permeability, is also considered. The RMF induces a strong azimuthal flow and a relatively weak meridional flow (Ekman effect) at the front of the mushy zone during unidirectional solidification. This forced flow reduces the mushy zone thickness, induces the central segregation channel, affects the distribution of the intermetallic precipitates, and influences dendrite coarsening, which in turn modifies the interdendritic flow. Both interdendritic flow and the microstructure formation are strongly coupled. The modelling results support the explanation of Steinbach and Ratke—the formed intermetallic precipitates (β-Al5FeSi) can block the interdendritic flow, and hence influence the coarsening law. The distribution of β-Al5FeSi is dominantly influenced by the flow-induced macrosegregation. The simulation results of the Si and Fe distribution across the sample section are compared with the experimental results, showing good simulation–experiment agreement. Graphic Abstract During alloy solidifications the flow can influence the mushy zone by inducing macrosegregation, modifying the solidification microstructure, and influencing the formation of intermetallic precipitates. The resulting microstructural features can in turn affect the melt flow by changing the flow intensity and flow pattern. A three-phase volume-average-based solidification model is introduced to study the flow-solidification interaction, and hence to improve the knowledge on the formation mechanism of intermetallics and their effect on solidification. (a) Schematic for the flow pattern and formation of different phases; (b) experiment–simulation comparison of macrosegregation (Fe) across the diameter of as-solidified sample.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 1 M.C. Flemings: ISIJ Int., 2000, vol. 40, pp. 833–41.10.2355/isijinternational.40.833 ↗
2. 2 S. Steinbach and L. Ratke: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 200–410.1016/j.msea.2005.09.010 ↗
3. T. Campanella, C. Charbon, and M. Rappaz (2004) Metall. Mater. Trans., vol. 35, pp. 3201–10.10.1007/s11661-004-0064-1 ↗
4. P. Mikolajczak and L. Ratke (2015) Metall. Mater. Trans., vol. 46, pp. 1312–27.10.1007/s11661-014-2692-4 ↗
5. 5 H. Zhang, M. Wu, Y. Zheng, A. Ludwig, and A. Kharicha: Mater. Today Commun., 2020, vol. 22, p. 100842.10.1016/j.mtcomm.2019.100842 ↗
6. S. Steinbach, L. Ratke, G. Zimmermann, L. Sturz, A. Roósz, J. Kovács, Y. Fautrelle, O. Budenkova, L. J., S. Dost, G. G.-U, N. Warnken, M. Wu, and W.H. Sillekens: Proceedings of the 5th Decennial International Conference on Solidification Processing, Old Windsor, 2017, pp. 267–71.
7. W. Kurz and D.J. Fisher: in Metallography and Microstructures, second., Trans Tech Publications Ltd, Zuerich, 2018, pp. 71–92.
8. 8 D.H. Kirkwood: Mater. Sci. Eng., 1985, vol. 73, pp. L1–4.10.1016/0025-5416(85)90319-2 ↗
9. S. Steinbach and L. Ratke (2009) International Journal of Cast Metals Research 22:290–9310.1179/136404609X367920 ↗
10. 10 C. Puncreobutr, A.B. Phillion, J.L. Fife, and P.D. Lee: Acta Mater., 2014, vol. 64, pp. 316–25.10.1016/j.actamat.2013.10.044 ↗
11. J.C. Ramirez and C. Beckermann (2003) Metall. Mater. Trans. 34: 1525–36.10.1007/s11661-003-0264-0 ↗
12. 12 H. Neumann-Heyme, K. Eckert, and C. Beckermann: Acta Mater., 2017, vol. 140, pp. 87–96.10.1016/j.actamat.2017.08.021 ↗
13. Q. Li and C. Beckermann: Phys. Rev. E, 1998, vol. 57, pp. 3176–88.
14. 14 Y. Zheng, M. Wu, E. Karimi-Sibaki, A. Kharicha, and A. Ludwig: Int. J. Heat Mass Transf., 2018, vol. 122, pp. 939–53.10.1016/j.ijheatmasstransfer.2018.02.012 ↗
15. 15 M. Wu, A. Ludwig, and A. Kharicha: Metals (Basel)., 2019, vol. 9, pp. 229.10.3390/met9020229 ↗
16. 16 O. Budenkova, F. Baltaretu, S. Steinbach, L. Ratke, A. Roósz, A. Rónaföldi, J. Kovács, A.M. Bianchi, and Y. Fautrelle: Mater. Sci. Forum, 2014, vol. 790–791, pp. 46–51.10.4028/www.scientific.net/MSF.790-791.46 ↗
17. M. Wu and A. Ludwig: Metall. Mater. Trans., 2007, vol. 38, pp. 1465–75.10.1007/s11661-007-9175-9 ↗
18. 18 J. Lipton, M.E. Glicksman, and W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–63.10.1016/0025-5416(84)90199-X ↗
19. 19 G. Sha, K.A.Q. O’Reilly, B. Cantor, J.M. Titchmarsh, and R.G. Hamerton: Acta Mater., 2003, vol. 51, pp. 1883–97.10.1016/S1359-6454(02)00595-5 ↗
20. 20 J. Wang, P.D. Lee, R.W. Hamilton, M. Li, and J. Allison: Scr. Mater., 2009, vol. 60, pp. 516–9.10.1016/j.scriptamat.2008.11.048 ↗
21. 21 C. Puncreobutr, A.B. Phillion, J.L. Fife, P. Rockett, A.P. Horsfield, and P.D. Lee: Acta Mater., 2014, vol. 79, pp. 292–303.10.1016/j.actamat.2014.07.018 ↗
22. 22 D. Ferdian, B. Suharno, B. Duployer, C. Tenailleau, L. Salvo, and J. Lacaze: Trans. Indian Inst. Met., 2012, vol. 65, pp. 821–5.10.1007/s12666-012-0182-1 ↗
23. A. Ludwig and M. Wu: Metall. Mater. Trans., 2002, vol. 33, pp. 3673–83.10.1007/s11661-002-0241-z ↗
24. 24 M.C. Schneider and C. Beckermann: Int. J. Heat Mass Transf., 1995, vol. 38, pp. 3455–73.10.1016/0017-9310(95)00054-D ↗
25. 25 P. Mikolajczak and L. Ratke: Int. J. Cast Met. Res., 2013, vol. 26, pp. 339–53.10.1179/1743133613Y.0000000069 ↗
26. 26 J.K. Roplekar and J.A. Dantzig: Int. J. Cast Met. Res., 2001, vol. 14, pp. 79–95.10.1080/13640461.2001.11819428 ↗
27. 27 A. Rónaföldi, J. Kovács, and A. Roósz: Trans. Indian Inst. Met., 2009, vol. 62, pp. 475–7.10.1007/s12666-009-0078-x ↗
28. O. Budenkova, F. Baltaretu, J. Kovács, A. Roósz, A. Rónaföldi, A.M. Bianchi, and Y. Fautrelle: IOP Conference Series: Materials Science and Engineering, 2012, pp. 012046.10.1088/1757-899X/33/1/012046 ↗
29. 29 Y.W. Lee, R.N. Smith, M.E. Glicksman, and M.B. Koss: Annu. Rev. Heat Transf., 1996, vol. 7, pp. 59–139.10.1615/AnnualRevHeatTransfer.v7.40 ↗
30. 30 Q. Li and C. Beckermann: J. Cryst. Growth, 2002, vol. 236, pp. 482–98.10.1016/S0022-0248(01)02390-9 ↗
31. D.N. Miller, L. Lu, and A.K. Dahle: Metall. Mater. Trans, 2006, vol. 37, pp. 873–8.10.1007/BF02735008 ↗
32. 32 G. Sigworth, J. Campbell, and J. Jorstad: Int. J. Met., 2009, vol. 3, pp. 65–78.
33. X. Cao and J. Campbell: Metall. Mater. Trans, 2003, vol. 34, pp. 1409–20.10.1007/s11661-003-0253-3 ↗
34. Y.H. Cho, H.C. Lee, K.H. Oh, and A.K. Dahle: Metall. Mater. Trans., 2008, vol. 39, pp. 2435–48.10.1007/s11661-008-9580-8 ↗
35. 35 S. Terzi, J.A. Taylor, Y.H. Cho, L. Salvo, M. Suéry, E. Boller, and A.K. Dahle: Acta Mater., 2010, vol. 58, pp. 5370–80.10.1016/j.actamat.2010.06.012 ↗