journal article·2021-01

Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium

Sumeet Mishra, K. U. Yazar, Amlan Kar, R. Lingam, N. V. Reddy, Om Prakash, Satyam Suwas

Publisher page

Abstract

In the present investigation, the evolution of texture and microstructure during incremental sheet forming was investigated. Hot-rolled sheets of commercially pure titanium were subjected to single-point incremental forming to obtain truncated pyramid geometries. It was observed from texture measurements that there was splitting of basal poles along the transverse direction. Moreover, a significant number of twins was observed in the deformed microstructure with the fraction of extension twins being highest compared to other variants. The crossing of deformation twins, formation of twin lamellar structure and formation of secondary extension twins within primary contraction twins were additionally observed. The state of deformation in the pyramid walls was analyzed via finite element method which in turn was used as input for carrying out crystallographic texture simulations via visco-plastic self-consistent simulations. It was observed that the state of deformation in the wall regions is plain strain compression plus through-thickness shear.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. L. Filicel, L. Fratin, and F. Micari: CIRP Ann., 2002, vol. 51, pp. 199–202.10.1016/S0007-8506(07)61499-1 ↗
2. K. Jackson and J. Allwood: J. Mater. Process. Technol., 2009, vol. 209, pp. 1158–74.10.1016/j.jmatprotec.2008.03.025 ↗
3. Y. H. Kim and J.. J. Park: J. Mater. Process. Technol., 2002, vol. 130–131, pp. 42–6.10.1016/S0924-0136(02)00788-4 ↗
4. B. Lu, Y. Fang, D.K. Xu, J. Chen, S. Ai, H. Long, H. Ou, and J. Cao: Int. J. Mach. Tools Manuf., 2015, vol. 93, pp. 37–48.10.1016/j.ijmachtools.2015.03.007 ↗
5. P.A.F. Martins, N. Bay, M. Skjoedt, and M.B. Silva: CIRP Ann. - Manuf. Technol., 2008, vol. 57, pp. 247–52.10.1016/j.cirp.2008.03.047 ↗
6. M. Shim and J. Park: J. Mater. Process. Technol., 2001, vol. 113, pp. 654–8.10.1016/S0924-0136(01)00679-3 ↗
7. J. Smith, R. Malhotra, and W.K.L. Jian: Int. J. Adv. Manuf. Technol., 2013, pp. 1185–1201.10.1007/s00170-013-5053-3 ↗
8. J.J. Park and Y.H. Kim: J. Mater. Process. Technol., 2003, vol. 140, pp. 447–53.10.1016/S0924-0136(03)00768-4 ↗
9. K.U. Yazar, S. Mishra, K. Narasimhan, and P.P. Date: Int. J. Adv. Manuf. Technol, 2018, vol. 101, pp. 2355-2366.10.1007/s00170-018-3131-2 ↗
10. J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, and J. Allwood: CIRP Ann., 2005, vol. 54, pp. 88–114.10.1016/S0007-8506(07)60021-3 ↗
11. W.C. Emmens and A.H. van den Boogaard: J. Mater. Process. Technol., 2009, vol. 209, pp. 3688–95.10.1016/j.jmatprotec.2008.10.003 ↗
12. P. Eyckens, J.D.L. Moreau, J.R. Duflou, A. van Bael, and P. van Houtte: Int. J. Mater. Form., 2009, vol. 2, pp. 379–82.10.1007/s12289-009-0458-0 ↗
13. P. Eyckens, A. Van Bael, and P. Van Houtte: Int. J. Plast., 2009, vol. 25, pp. 2249–68.10.1016/j.ijplas.2009.02.002 ↗
14. D. Xu, R. Malhotra, J. Chen, B. Lu, and J. Cao: AIP Conf. Proc., 2013, vol. 1532, pp. 969–76.10.1063/1.4806938 ↗
15. A. Kumar, V. Gulati, P. Kumar, V. Singh, B. Kumar, and H. Singh: J. Mater. Res. Technol., 2019, vol. 8, pp. 1461–9.10.1016/j.jmrt.2018.11.001 ↗
16. F. Maqbool and M. Bambach: Int. J. Mech. Sci., 2018, vol. 136, pp. 279–92.10.1016/j.ijmecsci.2017.12.053 ↗
17. L.M. Smith, R.C. Averill, J.P. Lucas, T.B. Stoughton, and P.H. Matin: Int. J. Plast., 2003, vol. 19, pp. 1567–83.10.1016/S0749-6419(02)00035-9 ↗
18. S.H. Choi, J.H. Cho, K.H. Oh, K. Chung, and F. Barlat: Int. J. Mech. Sci., 2000, vol. 42, pp. 1571–92.10.1016/S0020-7403(99)00091-0 ↗
19. A.B. Lopes, F. Barlat, J.J. Gracio, J.F. FerreiraDuarte, and E.F. Rauch: Int. J. Plast., 2003, vol. 19, pp. 1–22.10.1016/S0749-6419(01)00016-X ↗
20. A.A. Salem, S.R. Kalidindi, R.D. Doherty, and S.L. Semiatin: Metall. Mater. Trans. A, 2006, vol. 37, pp. 259–68.10.1007/s11661-006-0171-2 ↗
21. M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty, and S.R. Kalidindi: Acta Mater., 2010, vol. 58, pp. 6230–42.10.1016/j.actamat.2010.07.041 ↗
22. C.N. Tome and R.A. Lebenson: Manual for Code Version 7c, 2009.
23. A. Ghosh, A. Singh, and N.P. Gurao: Mater. Charact., 2017, vol. 125, pp. 83–93.10.1016/j.matchar.2017.01.022 ↗
24. Y. Zhong, F. Yin, and K. Nagai: J. Mater. Res., 2008, vol. 23, pp. 2954–66.10.1557/JMR.2008.0354 ↗
25. Y.B. Chun, S.H. Yu, S.L. Semiatin, and S.K. Hwang: Mater. Sci. Eng. A, 2005, vol. 398, pp. 209–19.10.1016/j.msea.2005.03.019 ↗
26. N.P. Gurao and S. Suwas: J. Mater. Res., 2011, vol. 26, pp. 523–32.10.1557/jmr.2010.70 ↗
27. I.. Dillamore and W.. Roberts: Acta Metall., 1964, vol. 12, pp. 281–93.10.1016/0001-6160(64)90204-4 ↗
28. M.J. Miles and N.J. Mills: J. Mater. Sci., 1975, vol. 10, pp. 2092–111.10.1007/BF00557488 ↗
29. S. Wang, Y. Zhang, C. Schuman, J.S. Lecomte, X. Zhao, L. Zuo, M.J. Philippe, and C. Esling: Acta Mater., 2015, vol. 82, pp. 424–36.10.1016/j.actamat.2014.09.038 ↗
30. I. Hibbitt, Karlsson & Sorensen: ABAQUS/CAE User’ s Man., 2000, pp. 1–847.
31. D.M. Neto, J.M.P. Martins, M.C. Oliveira, L.F. Menezes, and J.L. Alves: Int. J. Adv. Manuf. Technol., 2016, vol. 85, pp. 521–34.10.1007/s00170-015-7954-9 ↗
32. V.K. Barnwal, S. Chakrabarty, A. Tewari, K. Narasimhan, and S.K. Mishra: Int. J. Adv. Manuf. Technol. 95:921-35. doi: 10.1007/s00170-017-1238-5 (2018)10.1007/s00170-017-1238-5 ↗
33. N.P. Gurao, S. Sethuraman, and S. Suwas: Metall. Mater. Trans. A , 2013, vol. 44, pp. 1497–507.10.1007/s11661-012-1484-y ↗
34. R. Esmaeilpour, H. Kim, T. Park, F. Pourboghrat, and B. Mohammed: Int. J. Mech. Sci., 2017, vol. 133, pp. 544–54.10.1016/j.ijmecsci.2017.09.019 ↗
35. R. Esmaeilpour, H. Kim, T. Park, F. Pourboghrat, Z. Xu, B. Mohammed, and F. Abu-Farha: Int. J. Mech. Sci., 2018, vol. 145, pp. 24–41.10.1016/j.ijmecsci.2018.05.015 ↗
36. J.L. Sun, P.W. Trimby, F.K. Yan, X.Z. Liao, N.R. Tao, and J.T. Wang: Scr. Mater., 2013, vol. 69, pp. 428–31.10.1016/j.scriptamat.2013.06.001 ↗
37. A. Ghaderi and M.R. Barnett: Acta Mater., 2011, vol. 59, pp. 7824–39.10.1016/j.actamat.2011.09.018 ↗
38. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
39. M.H. YOO: Metall. Trans. A, 1981, vol. 409, pp. 25–8.
40. T. Benjamin Britton and A.J. Wilkinson: Acta Mater., 2012, vol. 60, pp. 5773–82.10.1016/j.actamat.2012.07.004 ↗
41. A. Khosravani, D.T. Fullwood, B.L. Adams, T.M. Rampton, M.P. Miles, and R.K. Mishra: Acta Mater., 2015, vol. 100, pp. 202–14.10.1016/j.actamat.2015.08.024 ↗
42. P. Shrivastava and P. Tandon: J. Mater. Process. Technol., 2019, vol. 266, pp. 292–310.10.1016/j.jmatprotec.2018.11.012 ↗
43. Y.N. Wang and J.C. Huang: Mater. Chem. Phys., 2003, vol. 81, pp. 11–26.10.1016/S0254-0584(03)00168-8 ↗
44. N. Bozzolo, N. Dewobroto, H.R. Wenk, and F. Wagner: J. Mater. Sci., 2007, vol. 42, pp. 2405–16.10.1007/s10853-006-1302-2 ↗
45. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1223–33.10.1007/s11661-999-0272-9 ↗