journal article·2020-10

Origin of Goss (110)〈001〉 Grains in Hot-Worked Grain-Oriented Steel

Sushil K. Giri, A. Durgaprasad, H. Mehtani, S. Kundu, I. Samajdar

Publisher page

Abstract

This study involved hot working, mimicking the first strand of a compact strip production, of grain-oriented (GO) and non-grain-oriented (NGO) electrical steel. The as-cast microstructures, between the grades, were similar: large (~ 550 μm average diameter and 1 to 7 mm length) columnar grains with ND//〈001〉 fiber texture. However, the developments in hot-worked microstructures were remarkably different. Firstly, the GO had higher carbon (0.06 vs 0.003 weight pct)—which led to the presence of austenite phase at the hot working temperatures. The GO also showed dynamic recrystallization (DRx) and the presence of Goss (110)〈001〉 grains in the hot-worked state. These were absent in the NGO. Further, the majority (~ 95 pct) of the Goss grains, in the hot-worked GO, originated from dynamic recrystallization (DRx) in the ferrite phase, surrounding the harder prior austenite regions. This study thus identified DRx by particle-stimulated nucleation as the primary source of Goss orientation in the hot-worked GO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. A.J. Moses. Electrical Steels: IEEE Proc,1990, vol. 137, pp. 233-245.
2. N. Takahashi and J. Harase: Mater. Sci. Forum, 1996, vol. 204-206, pp.143-154.10.4028/www.scientific.net/MSF.204-206.143 ↗
3. B. Verlinden, J. Driver, I. Samajdar, R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, 1st ed., Oxford: Elsevier, 2007, pp. 429-442.
4. N.P. Goss: US Patent 1965559, 1934.
5. Lyudkovsky G., Rastogi P.K. and Bala M.: J. Met., 1986, vol. 38,pp.18-26.
6. R. PremKumar, I. Samajdar, N. N. Viswanathan, V. Singal and V. Seshadri: J. Magn. Magn. Mater., 2003, vol. 264, pp. 75-85.10.1016/S0304-8853(03)00142-2 ↗
7. A. Chaudhury, R. Khatirkar, N.N. Viswanathan, V. Single, A. Ingle, S. Joshi and I. Samajdar: J. Magn. Magn. Mater., 2007, vol. 313, pp. 21-28.10.1016/j.jmmm.2006.11.217 ↗
8. May JE, Turnbull D. Trans. Metall. Soc. AIME, 1958, vol. 212, pp. 769-781.
9. W.C. Leslie, R.L. Rickett, C.P. Stroble and G. Konoval: Tran. ASM, 1961, vol. 53, pp. 715-734.
10. M. Matsuo: ISIJ Int. 1989, vol. 29 (10), pp. 809-827.10.2355/isijinternational.29.809 ↗
11. J. Harase, R. Shimizu, D.J. Dingley: Acta Metall, 1991, vol. 39(5), pp. 763-770.10.1016/0956-7151(91)90276-7 ↗
12. Y. Hayakawa and J.A. Spunnar: Acta Mater., 1997, vol. 3, pp. 1285-1295.10.1016/S1359-6454(96)00251-0 ↗
13. N. Chen, A. S. Zaefferer, L. Lahn, K. Günther, D. Raabe: Acta Mater., 2003, vol. 51, pp. 1755–1765.10.1016/S1359-6454(02)00574-8 ↗
14. T. Kubota, M. Fujikura and Y. Ushigami: J. Magn. Magn. Mater. 2000, vol. 215-216, pp. 69-73.10.1016/S0304-8853(00)00069-X ↗
15. Y. Ushigami, M. Mizokami, M. Fujikura, T. Kubota, H. Fuji and K. Murakami: J. Magn. Magn. Mater. 2003, vol. 254-255, pp. 307-314.10.1016/S0304-8853(02)00933-2 ↗
16. K. Günther, G, Abbruzzese, S. Fortunati and G. Ligi: Steel Res. Int. 2005, vol. 76(6), pp. 413-421.
17. Z.Xia, Y. Kang, Q. Wang: J. Magn. Magn. Mater. 2008, vol. 320, pp. 3229-3233.10.1016/j.jmmm.2008.07.003 ↗
18. H. Kobayashi, K. Kuroki, M. Minakuchi, K. Yakashiro: European Patent, EP 0339474 B1, 1988.
19. N. Takahashi, Y. Suga, H. Kobayashi:, J. Magn. Magn. Mater., 1996, vol. 160, pp. 98-101.10.1016/0304-8853(96)00126-6 ↗
20. S. Fortunati, S. Cicale, G. Abbruzzese: European Patent, EP0950118B1, 1996.
21. K. Ushioda and W. B. Hutchinson: ISIJ. Int. 1980, vol. 29, pp. 862-867.10.2355/isijinternational.29.862 ↗
22. I. Samajdar, S. Cicale, B. Verlinden, P. Van Houtte and G. Abbruzzesse: Scr. Mater., 1998, vol. 39(8), pp. 1083-1088.10.1016/S1359-6462(98)00288-7 ↗
23. S.Cicalè, I. Samajdar, B. Verlinden, G. Abbruzzese and P. Van Houtte, ISIJ Int., 2002, vol. 42 (7), pp. 770-778.10.2355/isijinternational.42.770 ↗
24. M.F. Littmann, Metall. Trans. A, 1975, vol. 6A, pp. 1041-1045.10.1007/BF02661358 ↗
25. Y. Shimizu, Y. Ito and Y. Iida: Metall. Trans. A. 1986, vol. 17A, pp. 1323-1334.10.1007/BF02650113 ↗
26. M. Matsuo, T. Sakai, Y. Suga: Metall. Trans. A, 1986, vol. 17A, pp. 1313-1322.10.1007/BF02650112 ↗
27. J.W. Schoen: Metall. Trans. A, 1986,17A, pp. 1335-1346.10.1007/BF02650114 ↗
28. S. Akta, G.J. Richardson, C.M. Sellars: ISIJ Int. 2005, vol. 45 (11), pp. 1666-1675.10.2355/isijinternational.45.1666 ↗
29. B.D. Hong, J.K. Kim, K.M. Cho: J. Magn., 2006, vol. 11(3), pp. 111-114.10.4283/JMAG.2006.11.3.111 ↗
30. S. K. Giri, A. Durgaprasad, K. Thool, S. Kundu and I. Samajdar: Mater. Sc. Technol.,2019, vol.9, pp. 1095-1106.10.1080/02670836.2019.1612594 ↗
31. F. Bachmann, R. Hielscher, H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
32. F.J.G. Landgraf, T. Yonamine, R. Takanohashi, F.Q. Silva, J.P.V. Tosetti, F. BenduceNeto, E. Albertin, V.N.G. Mazzarella, I.G.S. Falleiro, M. Emura: J. Magn. Magn. Mater., 2003, vol. 254-255, pp. 364-366.10.1016/S0304-8853(02)00869-7 ↗
33. H. Liu, Z. Liu, C. Li, G. Cao, G. Wang: Mater. Char., 2011, vol. 62, pp. 463-468.10.1016/j.matchar.2011.02.010 ↗
34. C. Zener and J.H. Holloman: J. Appl. Phys. 1944, vol. 15(1), pp. 22-32.10.1063/1.1707363 ↗
35. S.F. Medina, C.A. Hernandez: Acta Mater. 1996, vol 44(1), pp.137-148.10.1016/1359-6454(95)00151-0 ↗
36. J.J. Jonas, C.M. Sellars and W.J. McG. Tegart: Metall. rev., 1969, vol. 130, pp. 1-24.10.1179/095066069790138056 ↗
37. C.M. Sellars and W.J. McG. Tegart: Int. Metall. Rev., 1972, vol. 17, pp. 1-23.10.1179/095066072790137765 ↗
38. I. Samajdar, P. Ratchev, B. Verlinden and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1759-1769.10.1016/S1359-6454(01)00083-0 ↗
39. P. Van Houtte: Textures microstruct., 1991, vol. 13, pp.199-212.10.1155/TSM.13.199 ↗
40. M. Dahms: Textures microstruct.,1993, vol. 21, pp. 61-69.10.1155/TSM.21.61 ↗
41. S. Wright, M.M. Nowell, D.P. Field: Microsc. Microanal., 2011, 17(3), pp. 316-329.10.1017/S1431927611000055 ↗
42. P. Van Houtte, S. Li, M. Seefeldt, L. Delannay: Int. J. Plast., 2005, vol. 21, pp.589–624.10.1016/j.ijplas.2004.04.011 ↗
43. S. Raveendra, A.K. Kanjarla, H. Paranjpe, S.K. Mishra, S. Mishra, L. Delannay, I. Samajdar, P. Vanhoutte, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2113-2124.10.1007/s11661-010-0580-0 ↗
44. R.K. Ray and J. Jonas: Int. Mater. Rev. 1990, 35(1), 1-36.10.1179/095066090790324046 ↗
45. S. I. Wright and M.M. Nowell: Microsc. and Microanal., 2006, vol. 12, pp. 72-84.10.1017/S1431927606060090 ↗
46. K.S. Thool, K.V. ManiKrishna, D. Srivastava, A. Patra, R.D. Doherty, I. Samajdar: Metall. Mater. Trans. A, 2019, 50, 5000-5014.10.1007/s11661-019-05412-9 ↗
47. M.G. Glacivic, P.A. Kobryn, T.R. Bieler, S.L. Semiatin: Mater. Sci. Engg. A, 2004, vol. 385, pp. 372-376.10.1016/S0921-5093(04)00918-9 ↗
48. L. Germain, N. Gey, R. Mercier, P. Blaineau and M. Humbert: Acta Mater. 2012,vol. 60, pp. 4551-4562.10.1016/j.actamat.2012.04.034 ↗
49. C.R. Anoop, A. Prakash, S.K. Giri, S.V.S.N. Murty, I. Samajdar: Mater. Char. 2018, vol. 141, pp. 97-107.10.1016/j.matchar.2018.04.025 ↗
50. S. K. Giri, A. Durgaprasad, K.V. Manikrishna, C. R. Anoop, S. Kundu and I. Samajdar: Philos. Mag. 2019, vol. 99(6), pp. 699-707.10.1080/14786435.2018.1552030 ↗
51. G. Miyamoto, N. Iwata, N. Takayama, T. Furuhara: Acta Mater., 2010, vol. 58, pp. 6393– 6403.10.1016/j.actamat.2010.08.001 ↗
52. G. Miyamoto, N. Iwata, N. Takayama and T. Furuhara: ISIJ Int., 2011, vol. 51, pp. 1174–1178.10.2355/isijinternational.51.1174 ↗
53. F.J. Humphreys: Acta Metall. 1977, vol. 25, pp. 1323-1344.10.1016/0001-6160(77)90109-2 ↗
54. F.J. Humphreys: Acta Metall. 1979, vol. 27, pp. 1801-1814.10.1016/0001-6160(79)90071-3 ↗
55. F.J. Humphreys and H. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 2012.
56. A. Prakash, T.NasirTak, A. Lodh, N. Nayan, S.V.S. NarayanaMurty, P. J. Guruprasad and I. Samajdar, Met. Trans. A, 2019, vol. 50A, pp. 1250-1260.10.1007/s11661-018-5076-3 ↗
57. Y. Saito: Trans. ISIJ. 1987, vol.27, pp. 419-424.10.2355/isijinternational1966.27.419 ↗
58. T. Takeshita, J. Harase, H. Yada: Trans ISIJ, 1987, vol. 27, pp. 432-438.10.2355/isijinternational1966.27.432 ↗
59. O. Balancin, W.A.M. Hoffmann and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1353-1364.10.1007/s11661-000-0254-4 ↗
60. R. Ørsund and E. Nes: Scr.. Metall. Mater., 1988, vol. 22, pp. 671-67610.1016/S0036-9748(88)80180-7 ↗
61. I. Samajdar, L. Rabet, B. Verlinden and P. Van Houtte: ISIJ Int., 1998, vol. 38 (6), pp 539-546.10.2355/isijinternational.38.539 ↗
62. Y. Iida, H. Shimizu, Y. Ito, H. Shimanaka, Tetsu-to-Hagane. 1981, vol. 67, pp. 1217.
63. H. K. Moon, C.T. Kim: J. Kor. Inst. Met. 1984, vol. 22(12), pp. 1176-1181.
64. J. Harase, K. Takashima, Y. Matsumara, T. Haratani, T. Hayami, H. Matsumoto. Tetsu-to-Hagane., 1981, vol. 67, pp.120.
65. M. Muraki, T. Obara, M. Sato and T. Kan. J. Mater. Eng. Perform.1995, vol. 4(4), pp. 413-417.10.1007/BF02649300 ↗
66. G. Glover and C. M. Sellars: Metall. Trans. 1973, vol. 4, pp. 763-775.10.1007/BF02643086 ↗
67. S.V.S. Narayanurty, S. Torizuka and K. Nagai, T. Kitai, Y. Kogo: Scr. Mater. 2005, 53, 763-768.10.1016/j.scriptamat.2005.05.027 ↗
68. L. Li, W. Yang, Z. Sun: Metall. Mater. Trans. A. 2013, vol. 44A, pp. 2060-2069.10.1007/s11661-012-1572-z ↗
69. N. Haghdadi, P. Cizek, H. Beladi, P.D. Hodgson: Acta Mater. 2017, vol.126, pp. 44-57.10.1016/j.actamat.2016.12.045 ↗
70. H.J. Mcqueen, C.A.C. Imbert: J. Alloys. Compd., 2004, vol. 378, pp. 35-4310.1016/j.jallcom.2003.10.067 ↗
71. S.Raveendra, H. Paranjape, S. Mishra, H. Weiland, R.D. Doherty and I. Samajdar: Metall. Trans. A, 2009, vol. 40A, pp. 2220-2230.10.1007/s11661-009-9898-x ↗
72. A.H. Pham, T. Ohba, S. Morito, T. Hayashi: Mater. Char. 2017, vol. 132, pp. 108-118.10.1016/j.matchar.2017.08.007 ↗