journal article·2019-12

On Formation of Abnormally Large Grains in Annealing Prestrained Aluminum Alloy Multiport Extrusion Tubes

Kai Li, Tianxia Zou, Dayong Li, Yinghong Peng, Da Shu

Publisher page

Abstract

Abnormally large grains (ALGs) appear after annealing of prestrained multiport extrusion (MPE) tubes, which will significantly degrade the mechanical properties of the tubes. In the present work, the underpinning mechanisms of ALGs’ formation are probed through experiments. MPE tubes made of A3102 alloy are prestrained by roll leveling with different thickness reduction ratios and are then subjected to annealing at 600 °C for different times. Microstructural evolutions during annealing are characterized through electron backscatter diffraction (EBSD), in terms of crystallographic orientation, grain size distribution, grain boundary characters, and residual plastic strain. Uniaxial tension tests are carried out on the annealed tubes to study the effect of annealing on tubes’ strength. The thickness reduction prior to annealing produces heterogeneous deformation in tubes. The hard zones formed near grain boundaries and triple junction (TJs) are responsible for recrystallized nucleation in annealing. The duration of the identified incubation period for grain growth is inversely proportional to the thickness reduction ratio. The strain-free nuclei formed in the incubation period can grow fast into ALGs by means of strain-induced boundary migration. Further grain growth is inhibited by grains’ impingement after the strained grains are exhausted. Grains consumed by the growing ALGs tend to establish special boundary relationships with the ALGs and can turn into island grains. The significant reduction of tubes’ strength after annealing is attributed to the diminishment of grain boundaries caused by the formation of ALGs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. J. Zhao, Y.H. Diao, Y.H. Zhao, and Y.N. Zhang: Appl. Therm. Eng., 2014, vol. 65 (1), pp. 209–18.
2. M.M. Guzowski, F.F. Kraft, H.R. McCarhery, and J.C. Noveskey: Proc. Conf. 4th on Vehicle Thermal Management Systems, Wiley-Blackwell, Hoboken, NJ, 1999, pp. 24–27.
3. K. Li, T.X. Zou, D.Y. Li, D. Shu, D. Tang, and Y.H. Peng: J. Mater. Eng. Perform., 2019, https://doi.org/10.1007/s11665-019-04132-w.10.1007/s11665-019-04132-w ↗
4. D. Tang, X. Fan, W. Fang, D. Li, Y. Peng, and H. Wang: Mater. Charact., 2018, vol. 142, pp. 449–57.10.1016/j.matchar.2018.06.010 ↗
5. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 3rd ed., Elsevier, Amsterdam, 2017, pp. 145–304.10.1016/B978-0-08-098235-9.00005-7 ↗
6. P.A. Beck and P.R. Sperry: J. Appl. Phys., 1950, vol. 21 (2), pp. 150–52.10.1063/1.1699614 ↗
7. J.B. Koo and D.Y. Yoon: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 469–75.10.1007/s11661-001-0063-4 ↗
8. V.M. Miller, A.E. Johnson, C.J. Torbet, and T.M. Pollock: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1566–74.10.1007/s11661-016-3329-6 ↗
9. G. He, L. Tan, F. Liu, L. Huang, Z. Huang, and L. Jiang: J. Alloys Compd., 2017, vol. 718, pp. 405–13.10.1016/j.jallcom.2017.05.233 ↗
10. V.S. Tong and T.B. Britton: Acta Mater., 2017, vol. 129, pp. 510–20.10.1016/j.actamat.2017.03.002 ↗
11. A.D. Rollett, D.J. Srolovitz, and M.P. Anderson: Acta Metall., 1989, vol. 37 (4), pp. 1227–40.10.1016/0001-6160(89)90117-X ↗
12. S.G. Kim and B.P. Yong: Acta Mater., 2008, vol. 56 (15), pp. 3739–53.10.1016/j.actamat.2008.04.007 ↗
13. E.J. Payton, G. Wang, M.J. Mills, and Y. Wang: Acta Mater., 2013, vol. 61 (4), pp. 1316–26.10.1016/j.actamat.2012.11.009 ↗
14. M. Shirdel, H. Mirzadeh, and M.P. Habibi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5185–93.10.1007/s11661-014-2426-7 ↗
15. C.G. Dunn and J.L. Walter: Recrystallization, Grain Growth and Texture, ASM, Metals Park, OH, 1965, p. 461.
16. F. Fang, Y.X. Zhang, X. Lu, Y. Wang, M.F. Lan, G. Yuan, R.D.K. Misra, and G.D. Wang: Scripta Mater., 2018, vol. 147, pp. 33–36.10.1016/j.scriptamat.2017.12.034 ↗
17. T. Omori, T. Kusama, S. Kawata, L. Ohnuma, Y. Sutou, Y. Araki, K. Ishida, and R. Kainuma: Science, 2013, vol. 341 (6153), pp. 1500–02.10.1126/science.1238017 ↗
18. H.C. Kim, C.G. Kang, M.Y. Huh, and E. Olaf: Scripta Mater., 2007, vol. 57 (4), pp. 325–27.10.1016/j.scriptamat.2007.04.023 ↗
19. T.W. Na, H.K. Park, C.S. Park, J.T. Park, and N.M. Hwang: Acta Mater., 2016, vol. 115, pp. 224–29.10.1016/j.actamat.2016.06.007 ↗
20. A.J. Carpenter: Master’s Thesis, The University of Texas at Austin, Austin, TX, 2011, pp. 33–41.
21. I. Charit and R.S. Mishra: Scripta Mater., 2008, vol. 58 (5), pp. 367–71.10.1016/j.scriptamat.2007.09.052 ↗
22. S. Jana, R.S. Mishra, J.A. Baumann, and G. Grant: Mater. Sci. Eng. A, 2010, vol. 528, pp. 189–99.10.1016/j.msea.2010.08.049 ↗
23. X.H. Fan, D. Tang, W.L. Fang, D.Y. Li, and Y.H. Peng: Mater. Charact., 2016, vol. 118, pp. 468–80.10.1016/j.matchar.2016.06.025 ↗
24. X.H. Fan: Doctoral Thesis, Shanghai Jiao Tong University, Shanghai, 2017, pp. 36–45.
25. J.J. Salinas and A. Salinas: J. Mater. Eng. Perform., 2015, vol. 24, pp. 2117–25.10.1007/s11665-015-1469-2 ↗
26. M. Sachtleber, Z. Zhao, and D. Raabe: Mater. Sci. Eng. A, 2002, vol. 336 (1), pp. 81–87.10.1016/S0921-5093(01)01974-8 ↗
27. F. Bachmann, R. Hielscher, and H. Schaeben: Ultramicroscopy, 2011, vol. 111 (12), pp. 1720–33.10.1016/j.ultramic.2011.08.002 ↗
28. J.B. Koo, D.Y. Yoon, and M.F. Henry: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1489–91.10.1007/s11661-000-0267-z ↗
29. J. Harase, R. Shimizu, and N. Takahashi: Acta Metall. Mater., 1990, vol. 38 (10), pp. 1849–56.10.1016/0956-7151(90)90296-S ↗
30. V. Randle, N. Hansen, and D. Juul Jensen: Philos. Mag. A, 1996, vol. 73 (2), pp. 265–82.10.1080/01418619608244382 ↗
31. W. Yin, W. Wang, X. Fang, C. Qin, and X. Xing: Mater. Charact., 2015, vol. 107, pp. 134–38.10.1016/j.matchar.2015.07.005 ↗
32. W.C. Liu, P.P. Zhai, and C.S. Man: Mater. Sci. Eng. A, 2012, vol. 531, pp. 178–81.10.1016/j.msea.2011.10.067 ↗
33. K. Kashihara, Y. Takeuchi, and T. Shibayanagi: Mater. Trans., 2010, vol. 51 (4), pp. 607–13.10.2320/matertrans.L-MG200952 ↗
34. K. Kashihara, H. Konishi, and T. Shibayanagi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8443–50.10.1016/j.msea.2011.08.020 ↗
35. C. Antonione, F. Marino, G. Riontino, and M.C. Tabasso: J. Mater. Sci., 1977, vol. 12 (4), pp. 747–50.10.1007/BF00548166 ↗
36. W.T. Read and W. Shockley: Phys. Rev., 1950, vol. 78, pp. 275–89.10.1103/PhysRev.78.275 ↗
37. Y. Takayama and J.A. Szpunar: Mater. Trans., 2005, vol. 45 (7), pp. 2316–25.10.2320/matertrans.45.2316 ↗
38. J.J. Salinas and A. Salinas: J. Mater. Eng. Perform., 2015, vol. 24 (5), pp. 2117–25.10.1007/s11665-015-1469-2 ↗
39. S.P. Bellier and R.D. Doherty: Acta Metall., 1977, vol. 25 (5), pp. 521–38.10.1016/0001-6160(77)90192-4 ↗
40. G. Abrivard, E.P. Busso, S. Forest, and B. Appolaire: Philos. Mag., 2012, vol. 92, pp. 3618–42.10.1080/14786435.2012.713135 ↗
41. N.A. Pedrazas, T.E. Buchheit, E.A. Holm, and M.T. Eric: Mater. Sci. Eng. A, 2014, vol. 610, pp. 76–84.10.1016/j.msea.2014.05.031 ↗
42. V. Randle and A. Brown: Philos. Mag. A, 1988, vol. 58 (5), pp. 717–36.10.1080/01418618808209949 ↗
43. Z. Li, C. Hou, M. Huang, and C. Ouyang: Comput. Mater. Sci., 2009, vol. 46 (4), pp. 1124–34.10.1016/j.commatsci.2009.05.021 ↗
44. H. Lim, M.G. Lee, J.H. Kim, B.L. Adams, and R.H. Wagoner: Int. J. Plast., 2011, vol. 27 (9), pp. 1328–54.10.1016/j.ijplas.2011.03.001 ↗
45. Q.L. Zhao, B. Holmedal, Y.J. Li, E. Sagvolden, and O.M. Løvvik: Mater. Sci. Eng. A, 2015, vol. 625, pp. 153–57.10.1016/j.msea.2014.12.006 ↗