journal article·2019-08-15

Effect of Laves Phase on Ductile-Brittle Transition of 12 Pct Cr Steel

J. Borisova, V. Dudko, R. Mishnev, R. Kaibyshev

Publisher page

Abstract

The impact toughness of a martensitic 12 Cr-0.6 Mo-2.2 W-4 Co-0.8 Cu-VNb (in wt pct) steel subjected to tempering at 770 °C for 3 hours and aging at 650 °C for 643 hours was examined in the temperature range of − 20 to 250 °C. The steel in the tempered condition exhibits a ductile-brittle transition temperature (DBTT) of 41 °C and a Charpy V-notch impact energy of 100 J/cm2 at a temperature of 20 °C. The tempered steel becomes completely brittle at 0 °C when the absorbed energy falls to 8 J/cm2. The aging leads to the precipitation of a Laves phase at boundaries of the tempered martensite lath structure (TMLS). This deteriorates the impact toughness, the DBTT increases to 20 J/cm2, the impact toughness at a temperature of 20 °C decreases to 20 J/cm2. Under impact loads, the Laves phase particles serve as additional nucleation sites for micro-crack/void that facilitates unstable crack propagation. As a result, the appearance of cracks with critical dimensions takes place after stable crack propagation over a very short distance, and embrittlement takes place at relatively high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. K.-H. Mayer and F. Masuyama: in Creep-Resistant Steels, F. Abe, T.-U. Kern, and R. Viswanathan, eds., Woodhead Publishing and Maney Publishing, Cambridge, 2008, pp. 15–77.10.1533/9781845694012.1.15 ↗
2. 2 R.O. Kaybyshev, V.N. Skorobogatykh, and I.A. Shchenkova: Phys. Met. Metallogr., 2010, vol. 109, pp. 186–200.10.1134/S0031918X10020110 ↗
3. 3 R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10, pp. 96–101.10.1361/105994901770345402 ↗
4. 4 F. Masuyama: ISIJ Int., 2001, vol. 41(6), pp. 612–25.10.2355/isijinternational.41.612 ↗
5. A. Pirscher, B. Scarlin, and R. Vanstone: in Advances in Materials Technology for Fossil Power Plants—Proceedings from the 5th International Conference 2008, R. Viswanathan, D. Gandy, and K. Coleman, eds., ASM International, Marco Island, 2008, pp. 338–52.
6. 6 H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
7. 7 A. Kostka, K. Tak, R. Hellmig, Y. Estrin, and G. Eggeler: Acta Mater., 2007, vol. 55, pp. 539–50.10.1016/j.actamat.2006.08.046 ↗
8. V. Dudko, A. Belyakov, and R. Kaibyshev: ISIJ Int., 2016, pp. 3–6.
9. 9 H. Ghassemi-Armaki, R.P. Chen, K. Maruyama, and M. Igarashi: J. Nucl. Mater., 2013, vol. 433, pp. 23–9.10.1016/j.jnucmat.2012.09.026 ↗
10. 10 R. Mishnev, N. Dudova, A. Fedoseeva, and R. Kaibyshev: Mater. Sci. Eng. A, 2016, vol. 678, pp. 178–89.10.1016/j.msea.2016.09.096 ↗
11. 11 R. Mishnev, N. Dudova, and R. Kaibyshev: Mater. Sci. Eng. A, 2018, vol. 713, pp. 161–73.10.1016/j.msea.2017.12.066 ↗
12. 12 M. Mitsuhara, S. Yamasaki, M. Miake, H. Nakashima, M. Nishida, J. Kusumoto, and A. Kanaya: Philos. Mag. Lett., 2016, vol. 96, pp. 76–83.10.1080/09500839.2016.1154200 ↗
13. 13 K. Maruyama, K. Sawada, and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641–53.10.2355/isijinternational.41.641 ↗
14. 14 V. Dudko, A. Belyakov, and R. Kaibyshev: Mater. Sci. Forum, 2012, vol. 706–709, pp. 841–6.10.4028/www.scientific.net/MSF.706-709.841 ↗
15. 15 A. Fedoseeva, N. Dudova, R. Kaibyshev, and A. Belyakov: Metals (Basel)., 2017, vol. 7, p. 573.10.3390/met7120573 ↗
16. 16 Q. Lu, W. Xu, and S. Van Der Zwaag: Acta Mater., 2014, vol. 77, pp. 310–23.10.1016/j.actamat.2014.06.007 ↗
17. S. Sathyanarayanan, J. Basu, A. Moitra, G. Sasikala, and V. Singh: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2141–55.10.1007/s11661-012-1510-0 ↗
18. 18 X. Hu, L. Huang, W. Yan, W. Wang, W. Sha, Y. Shan, and K. Yang: Mater. Sci. Eng. A, 2013, vol. 586, pp. 253–8.10.1016/j.msea.2013.08.025 ↗
19. 19 W. Zhong, W. Wang, X. Yang, W. Li, W. Yan, W. Sha, and W. Wang: Mater. Sci. Eng. A, 2015, vol. 639, pp. 252–8.10.1016/j.msea.2015.05.012 ↗
20. 20 W. Wang, W. Yan, W. Sha, Y. Shan, and K. Yang: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4113–22.10.1007/s11661-012-1240-3 ↗
21. 21 G. Sasikala and S.K. Ray: Mater. Sci. Eng. A, 2008, vol. 479, pp. 105–11.10.1016/j.msea.2007.06.021 ↗
22. 22 V. Dudko, A. Fedoseeva, and R. Kaibyshev: Mater. Sci. Eng. A, 2017, vol. 682, pp. 73–84.10.1016/j.msea.2016.11.035 ↗
23. A. Fedoseeva, N. Dudova, and R. Kaibyshev: Metall. Mater. Trans. A, 2017, vol. 48, pp. 982–98.10.1007/s11661-016-3926-4 ↗
24. 24 R. Mishnev, N. Dudova, V. Dudko, and R. Kaibyshev: Mater. Sci. Eng. A, 2018, vol. 730, pp. 1–9.10.1016/j.msea.2018.05.103 ↗
25. 25 A. Chatterjee, D. Chakrabarti, A. Moitra, R. Mitra, and A.K. Bhaduri: Mater. Sci. Eng. A, 2015, vol. 630, pp. 58–70.10.1016/j.msea.2015.01.076 ↗
26. 26 K.C. Sahoo, J. Vanaja, P. Parameswaran, V.D. Vijayanand, and K. Laha: Mater. Sci. Eng. A, 2017, vol. 686, pp. 54–64.10.1016/j.msea.2017.01.030 ↗
27. 27 T.S. Byun, D.T. Hoelzer, J.H. Kim, and S.A. Maloy: J. Nucl. Mater., 2017, vol. 484, pp. 157–67.10.1016/j.jnucmat.2016.12.004 ↗
28. R. Blum and R.W. Vanstone: in Materials for Advanced Power Engineering 2006. Proceedings Part I, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum Jülich GmbH, 2006, pp. 41–60.
29. 29 K. Anderko, L. Sch, and A.K. Ewaiom: J. Nucl. Mater., 1991, vol. 179–181, pp. 492–5.10.1016/0022-3115(91)90132-Q ↗
30. 30 Y. Hosoi, N. Wade, S. Kunimitsu, and T. Urita: J. Nucl. Mater., 1986, vol. 141–143, pp. 461–7.10.1016/S0022-3115(86)80083-6 ↗
31. 31 J. Blach, L. Falat, and P. Ševc: Eng. Fail. Anal., 2009, vol. 16, pp. 1397–403.10.1016/j.engfailanal.2008.09.003 ↗
32. S. Komazaki, T.S. Shigeokishi, H. Chiba, and K. Suzuki: Mater. Sci. Res. Int., 2003, vol. 9, pp. 919–26.
33. 33 P. Yan and Z. Liu: Mater. Sci. Eng. A, 2016, vol. 650, pp. 290–4.10.1016/j.msea.2015.09.115 ↗
34. ASTM E 23-12c: Standards, 2013, vol. i, pp. 1–25.
35. 35 V. Dudko, A. Belyakov, D. Molodov, and R. Kaibyshev: Metall. Mater. Trans. A, 2013, vol. 44, pp. 162–72.10.1007/s11661-011-0899-1 ↗
36. 36 A. Fedoseeva, N. Dudova, and R. Kaibyshev: J. Mater. Sci., 2017, vol. 52, pp. 2974–88.10.1007/s10853-016-0595-z ↗
37. Y.I. Borisova, V.A. Dudko, V.N. Skorobogatykh, I.A. Shchenkova, and R.O. Kaibyshev: Phys. Met. Metallogr. https://doi.org/10.1134/S0031918X1708004X.10.1134/S0031918X1708004X ↗
38. 38 A. Fedoseeva, I. Nikitin, N. Dudova, and R. Kaibyshev: Mater. Lett., 2019, vol. 236, pp. 81–4.10.1016/j.matlet.2018.10.081 ↗
39. 39 S.S. Wang, L. Chang, L. Wang, T. Wang, Y.D. Wu, J.J. Si, J. Zhu, M.X. Zhang, and X.D. Hui: Mater. Sci. Eng. A, 2015, vol. 622, pp. 204–11.10.1016/j.msea.2014.11.024 ↗
40. T. Vershinina and M. Leont-Smirnova: Mater. Charact., 2017, vol. 125, pp. 23–8.10.1016/j.matchar.2017.01.018 ↗
41. 41 S. Wang, L. Chang, D. Lin, X. Chen, and X. Hui: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4371–85.10.1007/s11661-014-2411-1 ↗
42. 42 S. Li, Z. Eliniyaz, X. Dong, Y. Shen, L. Zhang, and A. Shan: Mater. Sci. Eng. A, 2013, vol. 580, pp. 51–7.10.1016/j.msea.2013.05.030 ↗
43. J. Hald: in Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, A. Di Gianfrancesco, ed., Elsevier Ltd, 2016, pp. 77–97.10.1016/B978-0-08-100552-1.00003-8 ↗
44. C. Cui, X. Gao, G. Su, C. Gao, Z. Liu, and R.D.K. Misra: Mater. Sci. Technol. (United Kingdom), https://doi.org/10.1080/02670836.2018.1510072.10.1080/02670836.2018.1510072 ↗
45. 45 F.-G. Wei, T. Hara, and K. Tsuzaki: Philos. Mag., 2004, vol. 84, pp. 1735–51.10.1080/14786430310001638762 ↗
46. 46 M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1255–62.10.1007/s11661-004-0299-x ↗
47. 47 N. Dudova, A. Plotnikova, D. Molodov, A. Belyakov, and R. Kaibyshev: Mater. Sci. Eng. A, 2012, vol. 534, pp. 632–9.10.1016/j.msea.2011.12.020 ↗
48. 48 M. Shibuya, Y. Toda, K. Sawada, H. Kushima, and K. Kimura: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5387–93.10.1016/j.msea.2011.03.088 ↗
49. 49 A. Fedoseeva, N. Dudova, and R. Kaibyshev: Mater. Sci. Eng. A, 2016, vol. 654, pp. 1–12.10.1016/j.msea.2015.12.027 ↗
50. 50 Y. Toda, K. Seki, K. Kimura, and F. Abe: ISIJ Int., 2003, vol. 43, pp. 112–8.10.2355/isijinternational.43.112 ↗
51. 51 M. Rashidi, L. Johansson, H.O. Andrén, and F. Liu: Mater. Sci. Eng. A, 2017, vol. 694, pp. 57–65.10.1016/j.msea.2017.03.113 ↗
52. 52 M. Hättestrand and H.O. Andrén: Mater. Sci. Eng. A, 2001, vol. 318, pp. 94–101.10.1016/S0921-5093(01)01304-1 ↗
53. 53 M.G. Park, C.H. Lee, J. Moon, J.Y. Park, T.H. Lee, N. Kang, and H. Chan Kim: J. Nucl. Mater., 2017, vol. 485, pp. 15–22.10.1016/j.jnucmat.2016.12.018 ↗
54. 54 W. Wang, S. Liu, G. Xu, B. Zhang, and Q. Huang: Nucl. Eng. Technol., 2016, vol. 48, pp. 518–24.10.1016/j.net.2015.11.004 ↗
55. ASM Handbook, Volume 8, Mechanical Testing and Evaluation, ASM International, 2000.
56. Chaouadi R. and Fabry A.: in From Charpy to Present Impact Testing, D. Franqois and A. Pineau, eds., 1st ed., Elsevier Science Ltd. and ESIS, Oxford, 2002, pp. 103–17.10.1016/S1566-1369(02)80011-5 ↗
57. 57 A. Dolzhenko, Z. Yanushkevich, S.A. Nikulin, A. Belyakov, and R. Kaibyshev: Mater. Sci. Eng. A, 2018, vol. 723, pp. 259–68.10.1016/j.msea.2018.03.044 ↗
58. 58 M. V. Odnobokova, A.Y. Kipelova, A.N. Belyakov, and R.O. Kaibyshev: Phys. Met. Metallogr., 2016, vol. 117, pp. 390–8.10.1134/S0031918X16040098 ↗
59. 59 F. Zia-Ebrahimi and G. Krauss: Metall. Trans. A, 1983, vol. 14, pp. 1109–19.10.1007/BF02659859 ↗
60. ASM Handbook, Volume 12, Fractography, ASM International, 1987.
61. 61 A. Das: Philos. Mag., 2017, vol. 97, pp. 3084–141.10.1080/14786435.2017.1367857 ↗
62. 62 G. Le Roy, J.D. Embury, G. Edwards, and M.F. Ashby: Acta Metall., 1981, vol. 29, pp. 1509–22.10.1016/0001-6160(81)90185-1 ↗
63. 63 L.M. Brown and S.H.Goods: Acta Metall., 1979, vol. 27, pp. 1–15.10.1016/0001-6160(79)90051-8 ↗
64. 64 A. Das and C.B. Basak: Philos. Mag., 2018, vol. 98, pp. 3007–33.10.1080/14786435.2018.1513657 ↗
65. A. Das, S.K. Das, and S. Tarafder: Metall. Mater. Trans. A, 2009, vol. 40, pp. 3138–46.10.1007/s11661-009-9999-6 ↗
66. 66 K.J. Harrelson, S.H. Rou, and R.C. Wilcox: J. Nucl. Mater., 1986, vol. 141–143, pp. 508–12.10.1016/S0022-3115(86)80091-5 ↗
67. 67 D. Broek: Eng. Fract. Mech., 1973, vol. 5, pp. 55–66.10.1016/0013-7944(73)90007-6 ↗
68. 68 A. Needleman and V. Tvergaard: J. Mech. Phys. Solids, 1987, vol. 35, pp. 151–83.10.1016/0022-5096(87)90034-2 ↗
69. 69 A.S. Argon: Acta Metall., 1987, vol. 35, pp. 185–96.10.1016/0001-6160(87)90228-8 ↗