journal article·2023-10Open access

Effect of Room-Temperature Pre-rolling and Pre-cryorolling on Natural Aging and Bake Hardening Response of an Al–Mg–Si Alloy

Jianrui Xing, Gang Lei, Yafei Wang, Laxman Bhatta, Charlie Kong, Hailiang Yu

Abstract

Abstract The auto industry makes extensive use of Al–Mg–Si alloys. This study investigated the effect of pre-cryorolling and room-temperature pre-rolling on the natural aging and bake hardening response of Al–0.92Mg–0.48Si alloy. The mechanical properties were analyzed using microhardness, tensile, and Erichsen cupping test. Optical microscope, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and differential scanning calorimetry were used to examine the microstructure of samples. The molecular dynamics simulation was also employed to study the dislocation evolution in samples deformed at room and cryogenic temperature. The results show that both room-temperature pre-rolling and pre-cryorolling introduced immediately after solid solution treatment can effectively inhibit the adverse effects of natural aging, and promote the precipitation of strengthening phase during paint baking, leading to an improved bake hardening response. Compared with the room-temperature pre-rolling, pre-cryorolling can further improve the bake hardening response because of higher dislocation density. The results of this study indicate that pre-cryorolling with a reduction of 15 pct is the most appropriate pre-deformation procedure for this alloy, both in terms of formability and bake hardening response. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. S.N. Khangholi, M. Javidani, A. Maltais, and X.G. Chen: J. Mater. Res., 2022, vol. 37, pp. 670–91.10.1557/s43578-022-00488-3 ↗
2. G. Gao, X. Li, L. Yan, B. Xiong, Z. Li, Y. Zhang, K. Wen, and Y. Li: J. Cent. South Univ., 2022, vol. 29, pp. 950–59.10.1007/s11771-022-4958-0 ↗
3. J. Hirsch and T. Al-Samman: Acta Mater., 2013, vol. 61, pp. 818–43.10.1016/j.actamat.2012.10.044 ↗
4. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–3904.10.1016/S1359-6454(98)00059-7 ↗
5. Y. Aruga, M. Kozuka, Y. Takaki, and T. Sato: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5906–13.10.1007/s11661-014-2548-y ↗
6. E. Hodžić, J. Domitner, A. Thum, A.S. Sabet, N. Müllner, W. Fragner, and C. Sommitsch: J. Manuf. Process., 2023, vol. 94, pp. 228–39.10.1016/j.jmapro.2023.03.021 ↗
7. Z. Yang, X. Jiang, X. Zhang, M. Liu, Z. Liang, D. Leyvraz, and J. Banhart: Scripta Mater., 2021, vol. 190, pp. 179–82.10.1016/j.scriptamat.2020.08.046 ↗
8. S. Jin, T. Ngai, L. Li, Y. Lai, Z. Chen, and A. Wang: J. Alloys Compd., 2018, vol. 742, pp. 852–59.10.1016/j.jallcom.2017.10.005 ↗
9. F. Badkoobeh, A. Nouri, and H. Hassannejad: Mater. Sci. Eng. A, 2020, vol. 770, p. 138544.10.1016/j.msea.2019.138544 ↗
10. K. Chen, C. Liu, P. Ma, J. Yang, L. Zhan, M. Huang, and J. Hu: Mater. Sci. Eng. A, 2021, vol. 826, p. 141967.10.1016/j.msea.2021.141967 ↗
11. L. Zhu, M. Guo, Y. Wu, H. Zhu, and J. Zhang: J. Mater. Res. Technol., 2022, vol. 18, pp. 1009–16.10.1016/j.jmrt.2022.03.018 ↗
12. S. Duan, F. Guo, D. Wu, T. Wang, T. Tsuchiya, K. Matsuda, and Y. Zou: J. Mater. Res. Technol., 2021, vol. 15, pp. 2379–92.10.1016/j.jmrt.2021.09.063 ↗
13. X. Chen, D. Kim, O. Minho, C.D. Marioara, S.J. Andersen, A. Lervik, R. Holmestad, and E. Kobayashi: Mater. Sci. Eng. A, 2021, vol. 820, p. 141557.10.1016/j.msea.2021.141557 ↗
14. M. Elsayed, T.E.M. Staab, J. Čížek, and R. Krause-Rehberg: Acta Mater., 2021, vol. 219, p. 117228.10.1016/j.actamat.2021.117228 ↗
15. H. Li and W. Liu: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1990–98.10.1007/s11661-017-3955-7 ↗
16. D. Yin, Q. Xiao, Y. Chen, H. Liu, D. Yi, B. Wang, and S. Pan: Mater. Des., 2016, vol. 95, pp. 329–39.10.1016/j.matdes.2016.01.119 ↗
17. Z. Jia, L. Ding, Y. Weng, Z. Wen, and Q. Liu: Trans. Nonferr. Met. Soc. China, 2016, vol. 26, pp. 924–29.10.1016/S1003-6326(16)64188-2 ↗
18. Z. Yuan, C. Lu, L. Ding, K. Xiang, Y. Weng, Q. Liu, and Z. Jia: Mater. Sci. Eng. A, 2022, vol. 849, p. 143495.10.1016/j.msea.2022.143495 ↗
19. A. Serizawa, T. Sato, and M.K. Miller: Mater. Sci. Eng. A, 2013, vol. 561, pp. 492–97.10.1016/j.msea.2012.10.070 ↗
20. S. Zhu, H. Shih, X. Cui, C. Yu, and S.P. Ringer: Acta Mater., 2021, vol. 203, p. 116455.10.1016/j.actamat.2020.10.074 ↗
21. H. Xiong, L. Su, C. Kong, and H. Yu: Adv. Eng. Mater., 2021, vol. 23, p. 2001533.10.1002/adem.202001533 ↗
22. L. Li, H. Kang, S. Zhang, R. Li, X. Yang, Z. Chen, E. Guo, and T. Wang: J. Alloys Compd., 2023, vol. 938, p. 168656.10.1016/j.jallcom.2022.168656 ↗
23. F. Yu, Y. Zhang, C. Kong, and H. Yu: Mater. Sci. Eng. A, 2022, vol. 834, p. 142600.10.1016/j.msea.2022.142600 ↗
24. J. Liu, Y. Wu, H. Gao, C. Kong, and H. Yu: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 16–22.10.1007/s11661-022-06902-z ↗
25. M. Cui, Y.H. Jo, S.H. Kayani, H. Kim, and J. Lee: J. Mater. Res. Technol., 2022, vol. 20, pp. 2629–37.10.1016/j.jmrt.2022.08.037 ↗
26. B. Jelinek, S. Groh, M.F. Horstemeyer, J. Houze, S.G. Kim, G.J. Wagner, A. Moitra, and M.I. Baskes: Phys. Rev. B, 2012, vol. 85, p. 245102.10.1103/PhysRevB.85.245102 ↗
27. P. Hirel: Comput. Phys. Commun., 2015, vol. 197, pp. 212–19.10.1016/j.cpc.2015.07.012 ↗
28. A. Stukowski: Modell. Simul. Mater. Sci. Eng., 2010, vol. 18, p. 015012.10.1088/0965-0393/18/1/015012 ↗
29. P.H. Ninive, A. Strandlie, S. Gulbrandsen-Dahl, W. Lefebvre, C.D. Marioara, S.J. Andersen, J. Friis, R. Holmestad, and O.M. Løvvik: Acta Mater., 2014, vol. 69, pp. 126–34.10.1016/j.actamat.2014.01.052 ↗
30. C.D. Marioara, S.J. Andersen, J. Jansen, and H.W. Zandbergen: Acta Mater., 2001, vol. 49, pp. 321–28.10.1016/S1359-6454(00)00302-5 ↗
31. S. Pal, P.N. Babu, B.S.K. Gargeya, and C.S. Becquart: Mater. Chem. Phys., 2020, vol. 243, p. 122593.10.1016/j.matchemphys.2019.122593 ↗
32. H. Li, P. Chen, Z. Wang, F. Zhu, R. Song, and Z. Zheng: Mater. Sci. Eng. A, 2019, vol. 742, pp. 798–812.10.1016/j.msea.2018.03.098 ↗
33. H. Zhong, P.A. Rometsch, Q. Zhu, L. Cao, and Y. Estrin: Mater. Sci. Eng. A, 2017, vol. 687, pp. 323–31.10.1016/j.msea.2017.01.051 ↗
34. T. Mäkinen, P. Karppinen, M. Ovaska, L. Laurson, and M.J. Alava: Sci. Adv., 2020, vol. 6, p. eabc7350.10.1126/sciadv.abc7350 ↗
35. C.H. Wu, H. Li, T.J. Bian, C. Lei, and L.W. Zhang: Mater. Charact., 2022, vol. 184, p. 111694.10.1016/j.matchar.2021.111694 ↗
36. K. Qvale, O.S. Hopperstad, O. Reiso, U.H. Tundal, C.D. Marioara, and T. Børvik: Thin Wall Struct., 2021, vol. 158, p. 107160.10.1016/j.tws.2020.107160 ↗
37. V. Fallah, B. Langelier, N. Ofori-Opoku, B. Raeisinia, N. Provatas, and S. Esmaeili: Acta Mater., 2016, vol. 103, pp. 290–300.10.1016/j.actamat.2015.09.027 ↗
38. M. Song, E. Kobayashi, and J. Kim: J. Alloys Compd., 2023, vol. 946, p. 169291.10.1016/j.jallcom.2023.169291 ↗
39. K. Wu, G. Liu, P. Yu, C. Ye, J. Shi, and Y. Shen: Int. J. Plast., 2022, vol. 149, p. 103160.10.1016/j.ijplas.2021.103160 ↗
40. G. Li, M. Guo, J. Du, and L. Zhuang: Mater. Des., 2022, vol. 218, p. 110714.10.1016/j.matdes.2022.110714 ↗
41. L. Zhu, M. Guo, and J. Zhang: Mater. Sci. Eng. A, 2022, vol. 841, p. 143016.10.1016/j.msea.2022.143016 ↗
42. S. Dai, Z. Xie, and Y. Wang: Int. J. Plast., 2022, vol. 149, p. 103155.10.1016/j.ijplas.2021.103155 ↗