journal article·2023-04Open access

Evolution of Martensite Tetragonality in High-Carbon Steels Revealed by In Situ High-Energy X-Ray Diffraction

Thomas Kohne, Johan Fahlkrans, Albin Stormvinter, Emad Maawad, Aimo Winkelmann, Peter Hedström, Annika Borgenstam

Abstract

Abstract The martensitic transformation was studied by in situ and ex situ experiments in two high-carbon, 0.54 and 0.74 wt pct C, steels applying three different cooling rates, 15 °C/s, 5 °C/s, and 0.5 °C/s, in the temperature range around Ms, to improve the understanding of the evolution of martensite tetragonality c/a and phase fraction formed during the transformation. The combination of in situ high-energy X-ray diffraction during controlled cooling and spatially resolved tetragonality c/a determination by electron backscatter diffraction pattern matching was used to study the transformation behavior. The cooling rate and the different Ms for the steels had a clear impact on the martensitic transformation with a decrease in average tetragonality due to stronger autotempering for a decreasing cooling rate and higher Ms. A slower cooling rate also resulted in a lower fraction of martensite at room temperature, but with an increase in fraction of autotempered martensite. Additionally, a heterogeneous distribution of martensite tetragonality was observed for all cooling rates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. G. Krauss: Mater. Sci. Eng., 1999, vol. A273–275, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
2. G. Speich and W. Leslie: Metall. Trans., 1972, vol. 3(5), pp. 1043–54. https://doi.org/10.1007/BF02642436.10.1007/BF02642436 ↗
3. J. Speer, D. Matlock, B. De Cooman, and J. Schroth: Acta Mater., 2003, vol. 51(9), pp. 2611–22. https://doi.org/10.1016/S1359-6454(03)00059-4.10.1016/S1359-6454(03)00059-4 ↗
4. D. Edmonds, et al.: Mater. Sci. Eng. A, 2006, vol. 438–440(SPEC. ISS.), pp. 25–34. https://doi.org/10.1016/j.msea.2006.02.133.10.1016/j.msea.2006.02.133 ↗
5. P. Kelly and J. Nutting: Proc. R. Soc. Lond. Ser. A Math. Phys. Sci., 1961, vol. 259(1296), pp. 45–58.10.1098/rspa.1960.0210 ↗
6. M. Sarikaya, G. Thomas, J. Steeds, S. Barnard, and G. Smith: Solute-element partitioning and austenite stabilization in steels. Tech. Rep., Lawrence Berkeley Laboratory, 1982.10.2172/7031961 ↗
7. D. Buffum, J. Hollomon, and L. Jaffe: The tempering of martensite. Tech. Rep, Watertown Arsenal Labs, Watertown, 1945.
8. D. Sherman et al.: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, vol. 38A, pp. 1698–711. https://doi.org/10.1007/s11661-007-9160-3.10.1007/s11661-007-9160-3 ↗
9. B. Hutchinson, et al.: Acta Mater., 2011, vol. 59 (14), pp. 5845–58. https://doi.org/10.1016/j.actamat.2011.05.061.10.1016/j.actamat.2011.05.061 ↗
10. S. Babu, et al.: Metals, 2019, vol. 9(12), p. 1255. https://doi.org/10.3390/met9121255.10.3390/met9121255 ↗
11. N. Maruyama, S. Tabata, and H. Kawata: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51(3), pp. 1085–97. https://doi.org/10.1007/s11661-019-05617-y.10.1007/s11661-019-05617-y ↗
12. A. Clarke, et al.: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51(10), pp. 4984–5005. https://doi.org/10.1007/s11661-020-05972-1.10.1007/s11661-020-05972-1 ↗
13. A. Eggbauer, et al.: in Proceedings of the International Conference on Martensitic Transformations: Chicago, 2018, pp. 35–40. https://doi.org/10.1007/978-3-319-76968-4_6.10.1007/978-3-319-76968-4_6 ↗
14. Y. Wang, et al.: Acta Mater., 2020, vol. 184, pp. 30–40.10.1016/j.actamat.2019.11.051 ↗
15. J. Epp, T. Hirsch, and C. Curfs: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2210–17.10.1007/s11661-012-1087-7 ↗
16. J. Liu, N. Binot, D. Delagnes, and M. Jahazi: J. Mater. Res. Technol., 2012, vol. 12, pp. 234–42. https://doi.org/10.1016/j.jmrt.2021.02.075.10.1016/j.jmrt.2021.02.075 ↗
17. S. Van Bohemen and J. Sietsma: Mater. Sci. Technol. (U.K.), 2014, vol. 30(9), pp. 1024–33. https://doi.org/10.1179/1743284714Y.0000000532.10.1179/1743284714Y.0000000532 ↗
18. Z. Babasafari, et al.: J. Mater. Res. Technol., 2020, vol. 9(6), pp. 15286–97. https://doi.org/10.1016/j.jmrt.2020.10.071.10.1016/j.jmrt.2020.10.071 ↗
19. M. Nikravesh, M. Naderi, and G. Akbari: Mater. Sci. Eng. A, 2012, vol. 40, pp. 24–29. https://doi.org/10.1016/j.msea.2012.01.018.10.1016/j.msea.2012.01.018 ↗
20. K. Honda and Z. Nishiyama: Sci. Rep. Tohoku Imperial Univ., 1932, vol. 21, pp. 299–331.
21. E. Öhman: Nature, 1931, vol. 127(3199), pp. 270–72.10.1038/127270b0 ↗
22. L. Cheng, A. Bottger, T. de Keijser, and E. Mittemeijer: Scr. Metall. Mater., 1990, vol. 24(2), pp. 509–14.10.1016/0956-716X(90)90192-J ↗
23. T. Tanaka, N. Maruyama, N. Nakamura, and A. Wilkinson: Acta Mater., 2020, vol. 195, pp. 728–38.10.1016/j.actamat.2020.06.017 ↗
24. J. Fahlkrans, A. Melander, and S. Haglund: J. Heat Treat. Mater., 2013, vol. 68(6), pp. 239–45. https://doi.org/10.3139/105.110203.10.3139/105.110203 ↗
25. J. Since and O. Irretier: Heat Process, 2010, vol. 8, pp. 1–10.
26. N. Schell, et al.: Mater. Sci. Forum, 2014, vol. 72, pp. 57–61. https://doi.org/10.4028/WWW.SCIENTIFIC.NET/MSF.772.57.10.4028/WWW.SCIENTIFIC.NET/MSF.772.57 ↗
27. S. Aoued, et al.: Metals, 2020, vol. 10(1), p. 137. https://doi.org/10.3390/met10010137.10.3390/met10010137 ↗
28. A. Hammersley: J. Appl. Crystallogr., 2016, vol. 49(2), pp. 646–52. https://doi.org/10.1107/S1600576716000455.10.1107/S1600576716000455 ↗
29. G. Esteves, K. Ramos, C.M. Fancher, and J. Jones: LIPRAS: Line-profile analysis software peak fitting with LIPRAS, 2017. https://doi.org/10.13140/RG.2.2.29970.25282/3.10.13140/RG.2.2.29970.25282/3 ↗
30. K. Momma and F. Izumi: J. Appl. Crystallogr., 2008, vol. 41(3), pp. 653–58. https://doi.org/10.1107/S0021889808012016.10.1107/S0021889808012016 ↗
31. H. Lipson and A. Parker: J. Iron Steel Inst., 1944, vol. 142, pp. 123–35.
32. D. Keating and A. Goland: Acta Metall., 1967, vol. 15(12), pp. 1805–14. https://doi.org/10.1016/0001-6160(67)90045-4.10.1016/0001-6160(67)90045-4 ↗
33. S. Moss: Acta Metall., 1967, vol. 15(12), pp. 1815–26. https://doi.org/10.1016/0001-6160(67)90046-6.10.1016/0001-6160(67)90046-6 ↗
34. B. Toby and R. Von Dreele: J. Appl. Crystallogr., 2013, vol. 46(2), pp. 544–49. https://doi.org/10.1107/S0021889813003531.10.1107/S0021889813003531 ↗
35. S. Van Bohemen: Scr. Mater., 2013, vol. 69(4), pp. 315–18. https://doi.org/10.1016/j.scriptamat.2013.05.009.10.1016/j.scriptamat.2013.05.009 ↗
36. A. Winkelmann, G. Nolze, G. Cios, and T. Tokarski: Phys. Rev. Mater., 2018, vol. 2(12), pp. 1–7. https://doi.org/10.1103/PhysRevMaterials.2.123803.10.1103/PhysRevMaterials.2.123803 ↗
37. G. Nolze, A. Winkelmann, G. Cios, and T. Tokarski: Mater. Charact., 2021. https://doi.org/10.1016/j.matchar.2021.111040.10.1016/j.matchar.2021.111040 ↗
38. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41(6), pp. 1024–37. https://doi.org/10.1107/S0021889808030112.10.1107/S0021889808030112 ↗
39. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68. https://doi.org/10.4028/www.scientific.net/SSP.160.63.10.4028/www.scientific.net/SSP.160.63 ↗
40. S. Gaudez, J. Teixeira, S. Denis, G. Geandier, and S. Allain: Mater. Charact., 2022, 111740.10.1016/j.matchar.2022.111740 ↗
41. L. Morsdorf, C. Tasan, D. Ponge, and D. Raabe: Acta Mater., 2015, vol. 95, pp. 366–77. https://doi.org/10.1016/j.actamat.2015.05.023.10.1016/j.actamat.2015.05.023 ↗
42. P. Maugis, et al.: Mater. Lett., 2018, vol. 214, pp. 213–16. https://doi.org/10.1016/j.matlet.2017.12.007.10.1016/j.matlet.2017.12.007 ↗
43. J. Da Silva and R. McLellan: Mater. Sci. Eng., 1976, vol. 26(1), pp. 83–87. https://doi.org/10.1016/0025-5416(76)90229-9.10.1016/0025-5416(76)90229-9 ↗
44. K. Taylor and M. Cohen: Prog. Mater. Sci., 1992, vol. 36, pp. 240–41. https://doi.org/10.1016/0079-6425(92)90010-5.10.1016/0079-6425(92)90010-5 ↗
45. N. DeCristofaro, R. Kaplow, and W. Owen: Metall. Trans. A, 1978, vol. 9(6), pp. 821–25. https://doi.org/10.1007/BF02649791.10.1007/BF02649791 ↗
46. M. Hillert: Acta Metall., 1959, vol. 7(10), pp. 653–58. https://doi.org/10.1016/0001-6160(59)90141-5.10.1016/0001-6160(59)90141-5 ↗
47. T. Kohne, A. Dahlström, A. Winkelmann, P. Hedström, and A. Borgenstam: Materials, 2022, vol. 15(19), p. 6653. https://doi.org/10.3390/ma15196653.10.3390/ma15196653 ↗
48. J. Fisher, J. Hollomon, and D. Turnbull: JOM, 1949, vol. 1(10), pp. 691–700.10.1007/BF03398922 ↗
49. L. Cheng, C. Brakman, B. Korevaar, and E. Mittemeijer: Metall. Trans. A, 1988, vol. 19(10), pp. 2415–26.10.1007/BF02645469 ↗
50. Y. Ohmori and S. Sugisawa: Trans. Jpn Inst. Met., 1971, vol. 12(3), pp. 170–78.10.2320/matertrans1960.12.170 ↗
51. T. Kohne, et al.: Metall. Mater. Trans. A, 2022. https://doi.org/10.1007/s11661-022-06724-z.10.1007/s11661-022-06724-z ↗
52. J. Patel and M. Cohen: Acta Metall., 1953, vol. 1(5), pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
53. H. Yeddu, A. Borgenstam, and J. Ågren: Acta Mater., vol. 61(7), pp. 2595–606.10.1016/j.actamat.2013.01.039 ↗
54. M. Villa, F. Niessen, and M. Somers: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 28–40.10.1007/s11661-017-4387-0 ↗
55. Z. Xie, Y. Liu, and H. Hänninen: Acta Metall. Mater., 1994, vol. 42(12), pp. 4117–33.10.1016/0956-7151(94)90189-9 ↗
56. A. Roitburd and G. Kurdjumov: Mater. Sci. Eng., 1979, vol. 39(2), pp. 141–67.10.1016/0025-5416(79)90055-7 ↗
57. E. Machlin and M. Cohen: JOM, 1951, vol. 3(9), pp. 746–54.10.1007/BF03397387 ↗
58. S. Van Bohemen and J. Sietsma: Metall. Mater. Trans. A, 2009, vol. 40(5), pp. 1059–68.10.1007/s11661-009-9796-2 ↗
59. S. Chatterjee, H.-S. Wang, J. Yang, and H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22(6), pp. 641–44.10.1179/174328406X86128 ↗
60. S. Kajiwara: Metall. Mater. Trans. A, 1986, vol. 17(10), pp. 1693–702.10.1007/BF02817268 ↗
61. J. Hollomon, L. Jaffe, and D. Buffum: J. Appl. Phys., 1947, vol. 18(8), pp. 780–81.10.1063/1.1697838 ↗