Quantifying Equiaxed vs Epitaxial Solidification in Laser Melting of CMSX-4 Single Crystal Superalloy
Source abstract
Abstract
Abstract The competition between epitaxialvs.equiaxed solidification has been investigated in CMSX-4 single crystal superalloy during laser melting as practiced in additive manufacturing. Single-track laser scans were performed on a powder-free surface of directionally solidified CMSX-4 alloy with several combinations of laser power and scanning velocity. Electron backscattered diffraction (EBSD) mapping facilitated identification of new orientations,i.e., “stray grains” that nucleated within the fusion zone along with their area fraction and spatial distribution. Using high-fidelity computational fluid dynamics simulations, both the temperature and fluid velocity fields within the melt pool were estimated. This information was combined with a nucleation model to determine locations where nucleation has the highest probability to occur in melt pools. In conformance with general experience in metals additive manufacturing, the as-solidified microstructure of the laser-melted tracks is dominated by epitaxial grain growth; nevertheless, stray grains were evident in elongated melt pools. It was found that, though a higher laser scanning velocity and lower power are generally helpful in the reduction of stray grains, the combination of a stable keyhole and minimal fluid velocity further mitigates stray grains in laser single tracks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Solidification and crystal growth phenomena · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006, pp.17–20.10.1017/CBO9780511541285 ↗
2. A. Basak, R. Acharya, and S. Das: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3845–59.10.1007/s11661-016-3571-y ↗
3. J. Vitek: Acta Mater., 2005, vol. 53, pp. 53–67.10.1016/j.actamat.2004.08.039 ↗
4. R. Vilar and A. Almeida: J. Laser Appl., 2015, vol. 27, p. S17004.10.2351/1.4862697 ↗
5. T. Kalfhaus, M. Schneider, B. Ruttert, D. Sebold, T. Hammerschmidt, J. Frenzel, R. Drautz, W. Theisen, G. Eggeler, O. Guillon, and R. Vassen: Mater. Des., 2019, vol. 168, p. 107656.10.1016/j.matdes.2019.107656 ↗
6. S.S. Babu, S.A. David, J.W. Park, and J.M. Vitek: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 1–12.10.1179/136217104225017080 ↗
7. L. Felberbaum, K. Voisey, M. Gäumann, B. Viguier, and A. Mortensen: Mater. Sci. Eng. A, 2001, vol. 299, pp. 152–56.10.1016/S0921-5093(00)01378-2 ↗
8. S. Mokadem, C. Bezençon, J.M. Drezet, A. Jacot, J.D. Wagnière, and W. Kurz: TMS Annual Meeting, 2004, pp. 67–76.
9. J.M. Vitek: ASM Proc. Int. Conf. Trends Weld. Res., vol. 2005, pp. 773–79.
10. J.M. Vitek, S. Babu, and S. David: Process Optimization for Welding Single-Crystal Nickel-Bbased Superalloys. https://technicalreports.ornl.gov/cppr/y2001/pres/120424.pdf
11. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
12. M. Gäumann, R. Trivedi, and W. Kurz: Mater. Sci. Eng. A, 1997, vol. 226–228, pp. 763–69.10.1016/S0921-5093(97)80081-0 ↗
13. M. Gäumann, S. Henry, F. Cléton, J.D. Wagnière, and W. Kurz: Mater. Sci. Eng. A, 1999, vol. 271, pp. 232–41.10.1016/S0921-5093(99)00202-6 ↗
14. M. Gäumann, C. Bezençon, P. Canalis, and W. Kurz: Acta Mater., 2001, vol. 49, pp. 1051–62.10.1016/S1359-6454(00)00367-0 ↗
15. J.M. Vitek, S.A. David, and S.S. Babu: Welding and Weld Repair of Single Crystal Gas Turbine Alloys. https://www.researchgate.net/profile/Stan-David/publication/238692931_WELDING_AND_WELD_REPAIR_OF_SINGLE_CRYSTAL_GAS_TURBINE_ALLOYS/links/00b4953204ab35bbad000000/WELDING-AND-WELD-REPAIR-OF-SINGLE-CRYSTAL-GAS-TURBINE-ALLOYS.pdf
16. B. Kianian: Wohlers Report 2017: 3D Printing and Additive Manufacturing State of the Industry, Annual Worldwide Progress Report, Wohlers Associates, Inc., Fort Collins, 2017.
17. M. Ramsperger, L. Mújica Roncery, I. Lopez-Galilea, R.F. Singer, W. Theisen, and C. Körner: Adv. Eng. Mater., 2015, vol. 17, pp. 1486–93.10.1002/adem.201500037 ↗
18. A.B. Parsa, M. Ramsperger, A. Kostka, C. Somsen, C. Körner, and G. Eggeler: Metals, 2016, vol. 6, pp. 258-1–17.10.3390/met6110258 ↗
19. C. Körner, M. Ramsperger, C. Meid, D. Bürger, P. Wollgramm, M. Bartsch, and G. Eggeler: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3781–92.10.1007/s11661-018-4762-5 ↗
20. D. Bürger, A. Parsa, M. Ramsperger, C. Körner, and G. Eggeler: Mater. Sci. Eng. A, 2019, vol. 762, p. 138098,10.1016/j.msea.2019.138098 ↗
21. J. Pistor and C. Körner: Sci. Rep., 2021, vol. 11, p. 24482.10.1038/s41598-021-04235-2 ↗
22. I. Lopez-Galilea, B. Ruttert, J. He, T. Hammerschmidt, R. Drautz, B. Gault, and W. Theisen: Addit. Manuf., 2019, vol. 30, p. 100874.
23. N. Lu, Z. Lei, K. Hu, X. Yu, P. Li, J. Bi, S. Wu, and Y. Chen: Addit. Manuf., 2020, vol. 34, p. 101228.
24. K. Chen, R. Huang, Y. Li, S. Lin, W. Zhu, N. Tamura, J. Li, Z.W. Shan, and E. Ma: Adv. Mater., 2020, vol. 32, pp. 1–8.
25. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315–60.10.1080/09506608.2015.1116649 ↗
26. A. Basak, R. Acharya, and S. Das: Addit. Manuf., 2018, vol. 22, pp. 665–71.
27. R. Jiang, A. Mostafaei, J. Pauza, C. Kantzos, and A.D. Rollett: Mater. Sci. Eng. A, 2019. https://doi.org/10.1016/J.MSEA.2019.03.103.10.1016/J.MSEA.2019.03.103 ↗
28. R. Cunningham, C. Zhao, N. Parab, C. Kantzos, J. Pauza, K. Fezzaa, T. Sun, and A.D. Rollett: Science, 2019, vol. 363, pp. 849–52.10.1126/science.aav4687 ↗
29. B. Fotovvati, S.F. Wayne, G. Lewis, and E. Asadi: Adv. Mater. Sci. Eng., 2018, vol. 2018, p. 4920718.10.1155/2018/4920718 ↗
30. P.-J. Chiang, R. Jiang, R. Cunningham, N. Parab, C. Zhao, K. Fezzaa, T. Sun, and A.D. Rollett: in Advanced Real Time Imaging II, pp. 77–85.
31. J. Ye, S.A. Khairallah, A.M. Rubenchik, M.F. Crumb, G. Guss, J. Belak, and M.J. Matthews: Adv. Eng. Mater., 2019, vol. 21, pp. 1–9.10.1002/adem.201900185 ↗
32. C. Zhao, Q. Guo, X. Li, N. Parab, K. Fezzaa, W. Tan, L. Chen, and T. Sun: Phys. Rev. X, 2019, vol. 9, p. 021052.
33. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King: Acta Mater., 2016, vol. 108, pp. 36–45.10.1016/j.actamat.2016.02.014 ↗
34. N. Kouraytem, X. Li, R. Cunningham, C. Zhao, N. Parab, T. Sun, A.D. Rollett, A.D. Spear, and W. Tan: Appl. Phys. Rev., 2019, vol. 11, p. 064054.10.1103/PhysRevApplied.11.064054 ↗
35. T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski, A. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
36. J.H. Cho and S.J. Na: J. Phys. D, 2006, vol. 39, pp. 5372–78.10.1088/0022-3727/39/24/039 ↗
37. I. Yadroitsev, A. Gusarov, I. Yadroitsava, and I. Smurov: J. Mater. Process. Technol., 2010, vol. 210, pp. 1624–31.10.1016/j.jmatprotec.2010.05.010 ↗
38. S. Ghosh, L. Ma, L.E. Levine, R.E. Ricker, M.R. Stoudt, J.C. Heigel, and J.E. Guyer: JOM, 2018, vol. 70, pp. 1011–16.10.1007/s11837-018-2771-x ↗
39. Y. He, C. Montgomery, J. Beuth, and B. Webler: Mater. Des., 2019, vol. 183, p. 108126.10.1016/j.matdes.2019.108126 ↗
40. D. Rosenthal: Weld. J., 1941, vol. 20, pp. 220–34.
41. M. Tang, P.C. Pistorius, and J.L. Beuth: Addit. Manuf., 2017, vol. 14, pp. 39–48.
42. R.E. Aune, L. Battezzati, R. Brooks, I. Egry, H.J. Fecht, J.P. Garandet, M. Hayashi, K.C. Mills, A. Passerone, P.N. Quested, E. Ricci, F. Schmidt-Hohagen, S. Seetharaman, B. Vinet, and R.K. Wunderlich: Proc. Int.Symp. Superalloys Var. Deriv., 2005, pp. 467–76.10.7449/2005/Superalloys_2005_467_476 ↗
43. B.C. Wilson, J.A. Hickman, and G.E. Fuchs: JOM, 2003, vol. 55, pp. 35–40.10.1007/s11837-003-0158-z ↗
44. J.J. Valencia and P.N. Quested: ASM Handb., 2008, vol. 15, pp. 468–81.
45. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5, pp. 1–7.
46. N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson, and S.S. Babu: Acta Mater., 2016, vol. 112, pp. 303–14.10.1016/j.actamat.2016.03.063 ↗
47. R. Lin, H. Wang, F. Lu, J. Solomon, and B.E. Carlson: Int. J. Heat Mass Transf., 2017, vol. 108, pp. 244–56.10.1016/j.ijheatmasstransfer.2016.12.019 ↗
48. M. Bayat, A. Thanki, S. Mohanty, A. Witvrouw, S. Yang, J. Thorborg, N.S. Tiedje, and J.H. Hattel: Addit. Manuf., 2019, vol. 30, p. 100835.
49. K. Higuchi, H.-J. Fecht, and R.K. Wunderlich: Adv. Eng. Mater., 2007, vol. 9, pp. 349–54.10.1002/adem.200600277 ↗
50. Q. Guo, C. Zhao, M. Qu, L. Xiong, L.I. Escano, S.M.H. Hojjatzadeh, N.D. Parab, K. Fezzaa, W. Everhart, T. Sun, and L. Chen: Addit. Manuf., 2019, vol. 28, pp. 600–09.
51. J. Trapp, A.M. Rubenchik, G. Guss, and M.J. Matthews: Appl. Mater. Today, 2017, vol. 9, pp. 341–49.10.1016/j.apmt.2017.08.006 ↗
52. M. Schneider, L. Berthe, R. Fabbro, and M. Muller: J. Phys. D, 2008, vol. 41, p. 155502.10.1088/0022-3727/41/15/155502 ↗
53. Z. Gan, O.L. Kafka, N. Parab, C. Zhao, L. Fang, O. Heinonen, T. Sun, and W.K. Liu: Nat. Commun., 2021, vol. 12, p. 2379.10.1038/s41467-021-22704-0 ↗
54. B.J. Simonds, E.J. Garboczi, T.A. Palmer, and P.A. Williams: Appl. Phys. Rev., 2020, vol. 13, p. 024057.10.1103/PhysRevApplied.13.024057 ↗
55. J. Dantzig and M. Rappaz: Solidification, 2nd ed., EPFL Press, Lausanne, 2016, pp. 483–532.
56. W. Tiller, K. Jackson, J. Rutter, and B. Chalmers: Acta Metall., 1953, vol. 1, pp. 428–37.10.1016/0001-6160(53)90126-6 ↗
57. D. Zhang, A. Prasad, M.J. Bermingham, C.J. Todaro, M.J. Benoit, M.N. Patel, D. Qiu, D.H. StJohn, M. Qian, and M.A. Easton: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 4341–59.10.1007/s11661-020-05880-4 ↗
58. F. Yan, W. Xiong, and E.J. Faierson: Materials, 2017, vol. 10, p. 1260.10.3390/ma10111260 ↗
59. W. Tan and Y.C. Shin: Comput. Mater. Sci., 2015, vol. 98, pp. 446–58.10.1016/j.commatsci.2014.10.063 ↗
60. A. Hellawell, S. Liu, and S.Z. Lu: JOM, 1997, vol. 49, pp. 18–20.10.1007/BF02914650 ↗
61. H. Ji: China Foundry, 2019, vol. 16, pp. 262–66.10.1007/s41230-019-9074-x ↗
62. J.M. Vitek, S.A. David, and L.A. Boatner: Sci. Technol. Weld. Join., 1997, vol. 2, pp. 109–18.10.1179/stw.1997.2.3.109 ↗
63. X. Wang, J.A. Muñiz-Lerma, O. Sanchez-Mata, S.E. Atabay, M.A. Shandiz, and M. Brochu: Prog. Addit. Manuf., 2020, vol. 5, pp. 41–49.10.1007/s40964-020-00123-9 ↗