journal article·2023-05Open access

Evolution of γ′ Precipitation During the Early Stages of Industrial Forging of a Nickel-Based Superalloy

A. Coyne-Grell, J. Blaizot, S. Rahimi, I. Violatos, S. Nouveau, C. Dumont, A. Nicolaÿ, N. Bozzolo

Abstract

Abstract A sample of the Ni-based superalloy AD730 was heat treated at a supersolvus temperature (1160 °C) then slowly cooled through the solvus temperature (1110 °C) at 10 °C/hr down to 1080 °C, i.e., a rate representative of the cooling conditions of an industrial-scale billet undergoing controlled cooling. The γ′ precipitate distribution which forms during this cooling was investigated, and a mix of continuous and discontinuous precipitation was found. The discontinuous γ′ precipitates were imaged using 3D tomography, and were shown to present very different sizes, morphologies, and aspect ratios when observed in different 2D imaging planes. The interaction between different populations of γ′ precipitate and recrystallization was investigated, and it was found that the discontinuous precipitates present more of a barrier to recrystallization than the continuous ones. This has been explained based on the different inter-precipitate spacings observed for the two populations. In addition to these γ′ precipitates which form during slow cooling, a fine and dense distribution of approximately spherical γ′ precipitates was found to form dynamically, during subsequent subsolvus forging, within unrecrystallized grains.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. R.R. Unocic, G.B. Viswanathan, P.M. Sarosi, S. Karthikeyan, J. Li, and M.J. Mills: Mater. Sci. Eng. A, 2008, vol. 483–84, pp. 25–32.10.1016/j.msea.2006.08.148 ↗
3. D.M. Collins and H.J. Stone: Int. J. Plast., 2014, vol. 54, pp. 96–112.10.1016/j.ijplas.2013.08.009 ↗
4. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗
5. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1588–603.10.1007/s11661-009-9858-5 ↗
6. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloy. Compd., 2016, vol. 658, pp. 981–95.10.1016/j.jallcom.2015.11.002 ↗
7. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and A. Devaux: Sci. Rep., 2016, vol. 6, p. 16.10.1038/srep28650 ↗
8. F. Masoumi, M. Jahazi, J. Cormier, and D. Shahriari, in 2nd European Symposium on Superalloys and their Applications, E D P Sciences, Giens, France, 2014.
9. A.J. Ardell: Acta Metall., 1968, vol. 16, pp. 511–16.10.1016/0001-6160(68)90125-9 ↗
10. R.J. Mitchell, H.Y. Li, and Z.W. Huang: J. Mater. Process. Technol., 2009, vol. 209, pp. 1011–17.10.1016/j.jmatprotec.2008.03.008 ↗
11. A. Coyne-Grell, J. Blaizot, S. Rahimi, I. Violatos, S. Nouveau, C. Dumont, A. Nicolaÿ, and N. Bozzolo: J. Alloy. Compd., 2022, vol. 916, 165465.10.1016/j.jallcom.2022.165465 ↗
12. M. Pérez, C. Dumont, and S. Nouveau, in The 14th International Symposium on Superalloys (Superalloys 2021) eds. S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O'Brien and A. Suzuki, 2020, pp. 441–49
13. B.F. Hu, G.Q. Liu, K. Wu, and P.H. Hu: Acta Metall. Sin., 2012, vol. 48, pp. 830–36.10.3724/SP.J.1037.2012.00226 ↗
14. R.A. Ricks, A.J. Porter, and R.C. Ecob: Acta Metall., 1983, vol. 31, pp. 43–53.10.1016/0001-6160(83)90062-7 ↗
15. T. Grosdidier, A. Hazotte, and A. Simon: Mater. Sci. Eng. A, 1998, vol. 256, pp. 183–96.10.1016/S0921-5093(98)00795-3 ↗
16. V.V. Atrazhev, S.F. Burlatsky, D.V. Dmitriev, D. Furrer, N.Y. Kuzminyh, I.L. Lomaev, D.L. Novikov, S. Stolz, and P. Reynolds: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 3648–57.10.1007/s11661-020-05790-5 ↗
17. A. Devaux, B. Picque, M.F. Gervais, E. Georges, T. Poulain, and P. Heritier: Superalloys, 2012, vol. 2012, pp. 911–19.10.7449/2012/Superalloys_2012_911_919 ↗
18. M. Kulakov, S. Rahimi, and S.L. Semiatin: Metall. Mater. Trans. A., 2022, vol. 53A, pp. 407–19.10.1007/s11661-021-06493-1 ↗
19. S. Berg, D. Kutra, T. Kroeger, C.N. Straehle, B.X. Kausler, C. Haubold, M. Schiegg, J. Ales, T. Beier, M. Rudy, K. Eren, J.I. Cervantes, B.T. Xu, F. Beuttenmueller, A. Wolny, C. Zhang, U. Koethe, F.A. Hamprecht, and A. Kreshuk: Nat. Methods, 2019, vol. 16, pp. 1226–32.10.1038/s41592-019-0582-9 ↗
20. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82.10.1038/nmeth.2019 ↗
21. A.J. Wilkinson and P.B. Hirsch: Micron, 1997, vol. 28, pp. 279–308.10.1016/S0968-4328(97)00032-2 ↗
22. A. Nicolay, J.M. Franchet, J. Cormier, H. Mansour, M. De Graef, A. Seret, and N. Bozzolo: J. Microsc., 2019, vol. 273, pp. 135–47.10.1111/jmi.12769 ↗
23. F. Kocks, C. Tomé, and H. R. Wenk, Texture and Anisotropy. Preferred Orientations in Polycrystals and Their Effect on Material Properties, 2000.
24. P.R. Cha, D.H. Yeon, and S.H. Chung: Scripta Mater., 2005, vol. 52, pp. 1241–45.10.1016/j.scriptamat.2005.02.026 ↗
25. F. Findik: J. Mater. Sci. Lett., 1998, vol. 17, pp. 79–83.10.1023/A:1006510228181 ↗
26. P. Zieba: Arch. Metall. Mater., 2017, vol. 62, pp. 955–68.10.1515/amm-2017-0138 ↗
27. K.N. Tu and D. Turnbull: Acta Metall., 1967, vol. 15, pp. 1317–23.10.1016/0001-6160(67)90007-7 ↗
28. H. Danflou, M. Macia, T. Sanders and T. Khan, 1996.
29. M.F. Henry, Y.S. Yoo, D.Y. Yoon, and J. Choi: Metall. Trans. A, 1993, vol. 24, pp. 1733–43.10.1007/BF02657848 ↗
30. D.U. Furrer and H.J. Fecht: Scripta Mater., 1999, vol. 40, pp. 1215–20.10.1016/S1359-6462(99)00094-9 ↗
31. J.W. Cahn: Acta Metall., 1959, vol. 7, pp. 18–28.10.1016/0001-6160(59)90164-6 ↗
32. M. Chronowski and P. Zięba: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 35.10.1007/s43452-020-00039-9 ↗
33. J. Humphreys, G.S. Rohrer, and A. Rollett: Recrystallization and Related Annealing Phenomena, 3rd ed. Elsevier Science Bv, Amsterdam, 2017, pp. 1–704.10.1016/B978-0-08-098235-9.00001-X ↗
34. F. H. An, D. Q. Zhang, and P. T. Feng, Steel Research International, 2021, 92.
35. B. Dutta, E. Valdes, and C.M. Sellars: Acta Metall. Mater., 1992, vol. 40, pp. 653–62.10.1016/0956-7151(92)90006-Z ↗
36. H.J. Zhang, C. Li, Y.C. Liu, Q.Y. Guo, Y. Huang, H.J. Li, and J.X. Yu: J. Alloy. Compd., 2017, vol. 716, pp. 65–72.10.1016/j.jallcom.2017.05.042 ↗
37. B. Dutta, E. Palmiere, and C.M. Sellars: Acta Mater., 2006, vol. 49, pp. 785–94.10.1016/S1359-6454(00)00389-X ↗
38. I. Dutta and D.L. Bourell: Acta Metall. Mater., 1990, vol. 38, pp. 2041–49.10.1016/0956-7151(90)90071-N ↗