journal article·2023-01Open access

Development and Investigation of Mesoporous Bioactive Glass/Zein Coatings Electrodeposited on Titanium Alloy for Biomedical Applications

F. Maciąg, T. Moskalewicz, K. Cholewa-Kowalska, Z. Hadzhieva, M. Dziadek, A. Łukaszczyk, A. R. Boccaccini

Abstract

Abstract The objective of the present work was the development of cathodic electrophoretic deposition (EPD) to obtain composite coatings of mesoporous sol–gel glass (MSGG) particles embedded in a zein matrix on Ti-13Nb-13Zr substrates. To deposit robust and repeatable coatings, a direct current EPD and pulsed direct current EPD as well as the deposition kinetics were investigated, including the deposition yield and deposition rate. The stability of the suspension was determined based on the zeta potential and conductivity. Macroscopically homogeneous coatings with a thickness of about 10 µm and various volume fractions of MSGG were subjected to further examination. Coatings were uniform, exhibiting open porosity and showing excellent adhesion to the substrates. Both zein and MSGG particles revealed an amorphous structure. The coated substrates demonstrated greater resistance to electrochemical corrosion in Ringer's electrolyte in comparison with the virgin (non-coated) substrate. The coatings showed high roughness and moderate hydrophilicity. The incubation of the coated substrates in concentrated 1.5 simulated body fluid (1.5SBF) showed the formation of carbonate hydroxyapatite. The composite coatings showed improved antibacterial properties against gram-negative E. coli and gram-positive S. aureus bacteria compared to pure zein coatings. Electrophoretic MSGG/zein composite coatings should be further investigated in terms of their osteoconductive behavior, to confirm their suitability for medical applications in orthopedics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Electrophoretic Deposition in Materials Science · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. M. Kaur and K. Singh: Mater. Sci. Eng. C, 2019, vol. 102, pp. 844–62.10.1016/j.msec.2019.04.064 ↗
2. R. Bobbili and V. Madhu: Mater. Sci. Eng. A, 2017, vol. 700, pp. 82–91.10.1016/j.msea.2017.05.113 ↗
3. I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, M. Rakin, D. Veljović, and M. Babić: Tribol. Lett., 2010, vol. 40, pp. 59–70.10.1007/s11249-010-9639-8 ↗
4. H.Y. Hu, L. Zhang, Z.Y. He, Y.H. Jiang, and J. Tan: Mater. Sci. Eng. C, 2019, vol. 98, pp. 279–87.10.1016/j.msec.2018.12.137 ↗
5. P. Kumar, G.S. Mahobia, S. Mandal, V. Singh, and K. Chattopadhyay: Corros. Sci., 2021, vol. 189, 109597.10.1016/j.corsci.2021.109597 ↗
6. M. Geetha, A.K. Singh, K. Muraleedharan, A.K. Gogia, and R. Asokamani: J. Alloys Compd., 2001, vol. 329, pp. 264–71.10.1016/S0925-8388(01)01604-8 ↗
7. L.T. Duarte, S.R. Biaggio, R.C. Rocha-Filho, and N. Bocchi: Corros. Sci., 2013, vol. 72, pp. 35–40.10.1016/j.corsci.2013.02.007 ↗
8. C. Marker, S.L. Shang, J.C. Zhao, and Z.K. Liu: Comput. Mater. Sci., 2018, vol. 142, pp. 215–26.10.1016/j.commatsci.2017.10.016 ↗
9. L. Zhou, T. Yuan, R. Li, J. Tang, M. Wang, and F. Mei: J. Alloys Compd., 2018, vol. 762, pp. 289–300.10.1016/j.jallcom.2018.05.179 ↗
10. M. Morinaga: A Quantum Approach to Alloy Des., 2019, pp. 77–94.10.1016/B978-0-12-814706-1.00005-4 ↗
11. P. Majumdar, S.B. Singh, and M. Chakraborty: J. Mech. Behav. Biomed. Mater., 2011, vol. 4, pp. 1132–44.10.1016/j.jmbbm.2011.03.023 ↗
12. M. Niinomi and M. Nakai: Int. J. Biomater., 2011, 836587.10.1155/2011/836587 ↗
13. M. Geetha, U. Kamachi Mudali, A.K. Gogia, R. Asokamani, and B. Raj: Corros. Sci., 2004, vol. 46, pp. 877–92.10.1016/S0010-938X(03)00186-0 ↗
14. M. Geetha, A.K. Singh, A.K. Gogia, and R. Asokamani: J. Alloys Compd., 2004, vol. 384, pp. 131–44.10.1016/j.jallcom.2004.04.113 ↗
15. J. Raphel, M. Holodniy, S.B. Goodman, and S.C. Heilshorn: Biomaterials, 2016, vol. 84, pp. 301–14.10.1016/j.biomaterials.2016.01.016 ↗
16. D.D. Bosshardt, V. Chappuis, and D. Buser: Periodontol 2000, 2017, vol. 73, pp. 22–40.10.1111/prd.12179 ↗
17. D.V. Nazarov, V.M. Smirnov, E.G. Zemtsova, N.M. Yudintceva, M.A. Shevtsov, and R.Z. Valiev: ACS Biomater. Sci. Eng., 2018, vol. 4, pp. 3268–81.10.1021/acsbiomaterials.8b00342 ↗
18. C.E. Tanase, M. Golozar, S.M. Best, and R.A. Brooks: Colloids Surf. B Biointerfaces, 2019, vol. 176, pp. 176–84.10.1016/j.colsurfb.2018.12.064 ↗
19. D. Zhitomirsky, J.A. Roether, A.R. Boccaccini, I. Zhitomirsky, M. Science, and M.S. West: O. Ls, 2008, vol. 9, pp. 1853–60.
20. R. Paliwal and S. Palakurthi: J. Control. Release, 2014, vol. 189, pp. 108–22.10.1016/j.jconrel.2014.06.036 ↗
21. Y. Luo and Q. Wang: J. Appl. Polym. Sci., 2014, vol. 131, pp. 1–2.10.1002/app.40970 ↗
22. S. Gong, H. Wang, Q. Sun, S.T. Xue, and J.Y. Wang: Biomaterials, 2006, vol. 27, pp. 3793–99.10.1016/j.biomaterials.2006.02.019 ↗
23. Y. Yuan, M. Ma, Y. Xu, and D. Wang: Trends Food Sci. Technol., 2022, vol. 120, pp. 1–5.10.1016/j.tifs.2021.12.025 ↗
24. T. Miyoshi, K. Toyohara, and H. Minematsu: Polym. Int., 2005, vol. 54, pp. 1187–90.10.1002/pi.1829 ↗
25. X. Zhang, C. Dong, Y. Hu, M. Gao, and G. Luan: Food Sci. Hum. Wellness, 2021, vol. 10, pp. 270–77.10.1016/j.fshw.2021.02.018 ↗
26. L. Feng, J. Zhu, G. Wang, Y. Tang, H. Chen, W. Jin, F. Wang, B. Mei, Z. Xu, and R. Song: Plant Mol. Biol., 2009, vol. 69, pp. 649–59.10.1007/s11103-008-9444-z ↗
27. N. Matsushima, G.I. Danno, H. Takezawa, and Y. Izumi: Biochim. Biophys. Acta Protein Struct. Mol. Enzymol., 1997, vol. 1339, pp. 14–22.10.1016/S0167-4838(96)00212-9 ↗
28. H. Tan, H. Zhou, T. Guo, J. Li, C. Zhang, S. Wang, Y. Zhang, and L. Ma: Food Chem., 2022, vol. 374, 131563.10.1016/j.foodchem.2021.131563 ↗
29. J.W. Lawton: Cereal Chem., 2002, vol. 79, pp. 1–8.10.1094/CCHEM.2002.79.1.1 ↗
30. Y. Zhang, L. Cui, X. Che, H. Zhang, N. Shi, C. Li, Y. Chen, and W. Kong: J. Control. Release, 2015, vol. 206, pp. 206–19.10.1016/j.jconrel.2015.03.030 ↗
31. N. Meyer, L. Rivera, T. Ellis, J. Qi, M. Ryan, and A. Boccaccini: Coatings, 2018, vol. 8, p. 27.10.3390/coatings8010027 ↗
32. S. Kaya and A.R. Boccaccini: J. Coatings Technol. Res., 2017, vol. 14, pp. 683–89.10.1007/s11998-016-9885-2 ↗
33. Y. Ahmed and M.A. Ur Rehman: Surf. Interfaces, 2020, vol. 20, p. 100589.10.1016/j.surfin.2020.100589 ↗
34. P. Zhou, Y. Xia, X. Cheng, P. Wang, Y. Xie, and S. Xu: Biomaterials, 2014, vol. 35, pp. 10033–45.10.1016/j.biomaterials.2014.09.009 ↗
35. L. Ramos-Rivera, J. Dippel, and A.R. Boccaccini: ECS Trans., 2018, vol. 82, pp. 73–80.10.1149/08201.0073ecst ↗
36. D. Arcos and M. Vallet-Regí: Acta Biomater., 2010, vol. 6, pp. 2874–88.10.1016/j.actbio.2010.02.012 ↗
37. A. Balamurugan, G. Sockalingum, J. Michel, J. Fauré, V. Banchet, L. Wortham, S. Bouthors, D. Laurent-Maquin, and G. Balossier: Mater. Lett., 2006, vol. 60, pp. 3752–57.10.1016/j.matlet.2006.03.102 ↗
38. S. Vermeulen, Z.T. Birgani, and P. Habibovic: Biomaterials, 2022, vol. 283, 121431.10.1016/j.biomaterials.2022.121431 ↗
39. A. Kumar, C.R. Mariappan, and B.S. Sarahan: J. Non. Cryst. Solids, 2019, vol. 505, pp. 431–37.10.1016/j.jnoncrysol.2018.11.024 ↗
40. F. Baino, S. Fiorilli, and C. Vitale-Brovarone: Bioengineering, 2017, vol. 4, pp. 1–8.10.3390/bioengineering4010015 ↗
41. J. Xiao, Q. Wei, J. Xue, Z. Liu, Z. Li, Z. Zhou, F. Chen, and F. Zhao: Colloids Surf. A Physicochem. Eng. Asp., 2022, vol. 642, p. 128693.10.1016/j.colsurfa.2022.128693 ↗
42. X. Yan, X. Huang, C. Yu, H. Deng, Y. Wang, Z. Zhang, S. Qiao, G. Lu, and D. Zhao: Biomaterials, 2006, vol. 27, pp. 3396–403.10.1016/j.biomaterials.2006.01.043 ↗
43. F. Foroutan, B.A. Kyffin, I. Abrahams, A. Corrias, P. Gupta, E. Velliou, J.C. Knowles, and D. Carta: ACS Biomater. Sci. Eng., 2020, vol. 6, pp. 1428–37.10.1021/acsbiomaterials.9b01896 ↗
44. L. Ramos-Rivera, A. Cochis, S. Biser, E. Canciani, S. Ferraris, L. Rimondini, and A.R. Boccaccini: Bioact. Mater., 2021, vol. 6, pp. 1479–90.10.1016/j.bioactmat.2020.11.001 ↗
45. M.R. Zakaria, H. Md Akil, M.H. AbdulKudus, F. Ullah, F. Javed, and N. Nosbi: Compos. Part B Eng., 2019, vol. 176, p. 107313.10.1016/j.compositesb.2019.107313 ↗
46. S. Hu, W. Li, H. Finklea, and X. Liu: Adv. Colloid Interface Sci., 2020, vol. 276, 102102.10.1016/j.cis.2020.102102 ↗
47. Y. Ma, J. Han, M. Wang, X. Chen, and S. Jia: J. Mater., 2018, vol. 4, pp. 108–20.
48. S. Obregón, G. Amor, and A. Vázquez: Adv. Colloid Interface Sci., 2019, vol. 269, pp. 236–55.10.1016/j.cis.2019.05.003 ↗
49. R. Sikkema, K. Baker, and I. Zhitomirsky: Adv. Colloid Interface Sci., 2020, vol. 284, 102272.10.1016/j.cis.2020.102272 ↗
50. B. Hoomehr, K. Raeissi, F. Ashrafizadeh, S. Labbaf, and M. Kharaziha: Ceram. Int., 2021, vol. 47, pp. 34959–69.10.1016/j.ceramint.2021.09.037 ↗
51. Ö. Varlık, Y. Göncü, and N. Ay: Mater. Chem. Phys., 2022, vol. 282, p. 125927.10.1016/j.matchemphys.2022.125927 ↗
52. O. Gerard, A. Numan, S. Krishnan, and M. Khalid: J. Energy Storage, 2022, vol. 50, 104283.10.1016/j.est.2022.104283 ↗
53. M.A. Ur Rehman: Prosthesis, 2020, vol. 2, pp. 211–24.10.3390/prosthesis2030018 ↗
54. F. Maciąg, T. Moskalewicz, K. Kowalski, A. Łukaszczyk, Z. Hadzhieva, and A.R. Boccaccini: Materials (Basel), 2021, vol. 14, pp. 1–24.10.3390/ma14020312 ↗
55. E. McCafferty and G.K. Hubler: J. Electrochem. Soc., 1978, vol. 125, pp. 1892–93.10.1149/1.2131322 ↗
56. T. Kokubo and H. Takadama: Biomaterials, 2006, vol. 27, pp. 2907–15.10.1016/j.biomaterials.2006.01.017 ↗
57. T. Kokubo, S. Ito, Z.T. Huang, T. Hayashi, S. Sakka, T. Kitsugi, and T. Yamamuro: J. Biomed. Mater. Res., 1990, vol. 24, pp. 331–43.10.1002/jbm.820240306 ↗
58. A.G. Kalampounias: Bull. Mater. Sci., 2011, vol. 34, pp. 299–303.10.1007/s12034-011-0064-x ↗
59. I. Lebecq, F. Désanglois, A. Leriche, and C. Follet-Houttemane: J. Biomed. Mater. Res. A, 2007, vol. 83, pp. 156–68.10.1002/jbm.a.31228 ↗
60. H. Aguiar, J. Serra, P. González, and B. León: J. Non. Cryst. Solids, 2009, vol. 355, pp. 475–80.10.1016/j.jnoncrysol.2009.01.010 ↗
61. A. López-Noriega, D. Arcos, I. Izquierdo-Barba, Y. Sakamoto, O. Terasaki, and M. Vallet-Regí: Chem. Mater., 2006, vol. 18, pp. 3137–44.10.1021/cm060488o ↗
62. I. Izquierdo-Barba and M. Vallet-Regi: Biomed. Glas., 2015, vol. 1, pp. 140–50.
63. K. Hu, X. Huang, Y. Gao, X. Huang, H. Xiao, and D.J. McClements: Food Chem., 2015, vol. 182, pp. 275–81.10.1016/j.foodchem.2015.03.009 ↗
64. Y. Chen, Z. Zhao, G. Xia, F. Xue, C. Chen, and Y. Zhang: Int. J. Biol. Macromol., 2020, vol. 146, pp. 179–92.10.1016/j.ijbiomac.2019.12.251 ↗
65. H. Xu, Y. Chai, and G. Zhang: J. Agric. Food Chem., 2012, vol. 60, pp. 10075–81.10.1021/jf302940j ↗
66. S.A. Siti, S.H. Amirnordin, H.A. Rahman, H.Z. Abdullah, and H. Taib: Adv. Mater. Res., 2013, vol. 795, pp. 334–37.10.4028/www.scientific.net/AMR.795.334 ↗
67. A. Molaei and M.A. Yousefpour: Prot. Met. Phys. Chem. Surfaces, 2019, vol. 55, pp. 302–09.10.1134/S2070205119020217 ↗
68. B. Ferrari and R. Moreno: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 1069–78.10.1016/j.jeurceramsoc.2009.08.022 ↗
69. B. Ferrari and R. Moreno: J. Eur. Ceram. Soc., 1997, vol. 17, pp. 549–56.10.1016/S0955-2219(96)00113-6 ↗
70. M. Mishra, Y. Sakka, T. Uchikoshi, and L. Besra: J. Ceram. Soc. Japan, 2013, vol. 121, pp. 348–54.10.2109/jcersj2.121.348 ↗
71. L. Besra and M. Liu: Prog. Mater. Sci., 2007, vol. 52, pp. 1–61.10.1016/j.pmatsci.2006.07.001 ↗
72. L. Besra, T. Uchikoshi, T.S. Suzuki, and Y. Sakka: J. Am. Ceram. Soc., 2008, vol. 91, pp. 3154–59.10.1111/j.1551-2916.2008.02591.x ↗
73. D.J. Barrett, M.D. Linley, S.M. Best, and R.E. Cameron: Biofabrication, 2019, vol. 11, p. 045017.10.1088/1758-5090/ab331d ↗
74. L. Besra, T. Uchikoshi, T.S. Suzuki, and Y. Sakka: J. Eur. Ceram. Soc., 2009, vol. 29, pp. 1837–45.10.1016/j.jeurceramsoc.2008.07.031 ↗
75. B. Neirinck, O. Van Der Biest, and J. Vleugels: J. Phys. Chem. B, 2013, vol. 117, pp. 1516–26.10.1021/jp306777q ↗
76. G. Khang, J.M. Rhee, J.H. Lee, I. Lee, and H.B. Lee: Korea. Polym. J., 2000, vol. 8, pp. 276–84.
77. F. Dong, G.W. Padua, and Y. Wang: Soft Matter, 2013, vol. 9, pp. 5933–41.10.1039/c3sm50667c ↗
78. E. Corradini, P.S. Curti, A.B. Meniqueti, A.F. Martins, A.F. Rubira, and E.C. Muniz: Int. J. Mol. Sci., 2014, vol. 15, pp. 22438–70.10.3390/ijms151222438 ↗
79. K. Huang, S. Cai, G. Xu, M. Ren, X. Wang, R. Zhang, S. Niu, and H. Zhao: Surf. Coatings Technol., 2014, vol. 240, pp. 137–44.10.1016/j.surfcoat.2013.12.026 ↗
80. K. Huang, S. Cai, G. Xu, X. Ye, Y. Dou, M. Ren, and X. Wanga: J. Alloys Compd., 2013, vol. 580, pp. 290–97.10.1016/j.jallcom.2013.05.103 ↗
81. M.F. López, A. Gutiérrez, and J.A. Jiménez: Surf. Sci., 2001, vol. 482–485, pp. 300–05.10.1016/S0039-6028(00)01005-0 ↗
82. M. Metikoš-Huković, A. Kwokal, and J. Piljac: Biomaterials, 2003, vol. 24, pp. 3765–75.10.1016/S0142-9612(03)00252-7 ↗
83. D. Sreekanth, N. Rameshbabu, K. Venkateswarlu, C. Subrahmanyam, L. Rama Krishna, and K. Prasad Rao: Surf. Coat. Technol., 2013, vol. 222, pp. 31–37.10.1016/j.surfcoat.2013.01.056 ↗
84. S. Taruta, K. Kidokoro, T. Yamakami, T. Yamaguchi, K. Kitajima, M. Endo, and N. Saito: J. Nanomater., 2011, vol. 2011, pp. 1–9.10.1155/2011/935320 ↗
85. S. Kaya, M. Cresswell, and A.R. Boccaccini: Mater. Sci. Eng. C, 2018, vol. 83, pp. 99–107.10.1016/j.msec.2017.11.003 ↗
86. F. Kurtuldu, N. Mutlu, M. Michálek, K. Zheng, M. Masar, L. Liverani, S. Chen, D. Galusek, and A.R. Boccaccini: Mater. Sci. Eng. C, 2021, vol. 124, p. 112050.10.1016/j.msec.2021.112050 ↗