Effect of Ni on Microstructures and Mechanical Properties for Multielemental Nb–Si-Based Alloys
Source abstract
Abstract
Eight-element Nb–Si alloys (Nb–Si–Ti–Cr–Al–Hf–Zr–Ni) with different Ni contents were prepared by arc melting to obtain Nb–Si alloys with high mechanical properties. Phase selection, microstructure evolution, room-temperature fracture toughness, and compressive properties were investigated systematically. Results showed that the eutectic Nb–Si alloy becomes a hypereutectic Nb–Si alloy with the increase in Ni content. All alloys contain Nbss, γ-(Nb, X)5Si3 and Cr2(Nb, X) phases, and 2Ni and 3Ni alloys also contain the primary α-(Nb, X)5Si3 phase. With the increase in Ni content, the content and size of the primary α-(Nb, X)5Si3 phase increased. KQ first increased and then decreased, with the highest KQ of 12.6 MPa m1/2 occurring in the 2Ni alloy. The room-temperature maximum compressive strength was improved with 1 at. pct Ni addition but decreased with higher Ni addition. The strengthening mechanism is solid solution strengthening and a high content of the γ-(Nb, X)5Si3 phase by Ni element addition.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. P. Tsakiropoulos: J. Alloys Compd., 2018, vol. 748, pp. 569–76.10.1016/j.jallcom.2018.03.124 ↗
2. B.P. Bewley, M.R. Jackson, and J.C. Zhao: MRS Bull., 2003, vol. 28, pp. 636–46.
3. M.G. Mendiratta, J.J. Lewandowski, and D.M. Dimiduk: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 1573–83.10.1007/BF02667370 ↗
4. I. Papadimitriou, C. Utton, and P. Tsakiropoulos: Sci. Technol. Adv. Mater., 2017, vol. 18, pp. 467–79.10.1080/14686996.2017.1341802 ↗
5. G. Tai, C. Li, and B. Jing: Intermetallics, 2009, vol. 34, pp. 363–76.
6. Y.X. Tian, J.T. Guo, and L.Y. Sheng: Intermetallics, 2008, vol. 16, pp. 807–12.10.1016/j.intermet.2008.03.005 ↗
7. Y. Sainan, J. Lina, and S. Linfen: Intermetallics, 2013, vol. 38, pp. 102–06.10.1016/j.intermet.2013.02.022 ↗
8. B.P. Bewley, S.D. Sitzman, and L.N. Brewer: Microsc. Microanal., 2004, vol. 10, pp. 470–80.10.1017/S1431927604040760 ↗
9. Y.H. Duan: Rare Met. Mater. Eng., 2015, vol. 44, pp. 18–23.10.1016/S1875-5372(15)30004-7 ↗
10. D.Z. Chen, Q. Wang, and R.R. Chen: Mater. Charact., 2021, vol. 182, p. 111563.10.1016/j.matchar.2021.111563 ↗
11. S. Zhang and X.P. Guo: Intermetallics, 2016, vol. 70, pp. 33–44.10.1016/j.intermet.2015.12.002 ↗
12. S. Zhang and X.P. Guo: Mater. Sci. Eng. A, 2015, vol. 638, pp. 121–31.10.1016/j.msea.2015.04.003 ↗
13. G.X. Sun, L.N. Jia, and C.T. Ye: Intermetallics, 2021, vol. 133, p. 107172.10.1016/j.intermet.2021.107172 ↗
14. W.Y. Kim, H. Tanaka, and A. Kasama: Intermetallics, 2001, vol. 9, pp. 827–34.10.1016/S0966-9795(01)00072-3 ↗
15. Z.F. Li and P. Tsakiropoulos: Intermetallics, 2010, vol. 18, pp. 1072–78.10.1016/j.intermet.2010.02.012 ↗
16. K.S. Chan: Mater. Sci. Eng. A, 2002, vol. 329, pp. 513–22.10.1016/S0921-5093(01)01502-7 ↗
17. E.Y. Guo and S.S. Sudhanshu: Mater. Sci. Eng. A, 2017, vol. 687, pp. 99–106.10.1016/j.msea.2017.01.058 ↗
18. K.S. Chan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2315–28.10.1007/s11661-003-0295-6 ↗
19. D.L. Davidson and K.S. Chan: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2007–18.10.1007/s11661-999-0011-2 ↗
20. S.M. Zhang, J.R. Zhou, and J.B. Sha: Intermetallics, 2015, vol. 57, pp. 146–55.10.1016/j.intermet.2014.10.013 ↗
21. K.S. Chan: Mater. Sci. Eng. A, 2002, vol. 337, pp. 59–66.10.1016/S0921-5093(02)00011-4 ↗
22. K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1833–49.10.1007/s11661-003-0149-2 ↗
23. W. Wang, B. Zhang, and C. Zhou: Corros. Sci., 2014, vol. 86, pp. 304–09.10.1016/j.corsci.2014.06.011 ↗
24. Y. Murayama and S. Hanada: Sci. Technol. Adv. Mater., 2002, vol. 3, pp. 145–56.10.1016/S1468-6996(02)00005-0 ↗
25. J. Sha, C. Yang, and J. Liu: Scripta Mater., 2010, vol. 62, pp. 859–62.10.1016/j.scriptamat.2010.02.023 ↗
26. K.S. Chan: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1833–49.10.1007/s11661-003-0149-2 ↗
27. K. Zelenitsas and P. Tsakiropoulos: Mater. Sci. Eng. A, 2006, vol. 416, pp. 269–80.10.1016/j.msea.2005.10.017 ↗
28. T. Murakami, S. Sasaki, and K. Ichikawa: Intermetallics, 2001, vol. 9, pp. 629–35.10.1016/S0966-9795(01)00043-7 ↗
29. K. Zelenitsas and P. Tsakiropoulos: Intermetallics, 2005, vol. 13, pp. 1079–95.10.1016/j.intermet.2005.02.002 ↗
30. S. Kashyap, C.S. Tiwary, and K. Chattopadhyay: Mater. Sci. Eng. A, 2013, vol. 559, pp. 74–85.10.1016/j.msea.2012.08.027 ↗
31. Z.P. Sun, J.M. Guo, and Z. Chen: Rare Met. Mater. Eng., 2016, vol. 45, pp. 1678–82.10.1016/S1875-5372(16)30073-X ↗
32. G. Kommineni, B.R. Golla, and Z. Alam: J. Alloys Compd., 2021, vol. 873, p. 159832.10.1016/j.jallcom.2021.159832 ↗
33. G. Kommineni, A.M. Zafir, and R. Sarkar: Mater. Charact., 2020, vol. 171, p. 110723.10.1016/j.matchar.2020.110723 ↗
34. Y. Li, X. Lin, and Y. Hu: J. Alloys Compd., 2019, vol. 783, pp. 66–76.10.1016/j.jallcom.2018.12.280 ↗
35. M. Sankar, G. Phanikumar, and V. Prasad: Mater. Sci. Eng. A, 2019, vol. 754, pp. 224–31.10.1016/j.msea.2019.03.078 ↗
36. K. Geethasree, V. Prasad, and G.B. Raju: Corros. Sci., 2019, vol. 148, pp. 293–306.10.1016/j.corsci.2018.12.027 ↗
37. M. Sankar, G. Phanikumar, and V. Prasad: Mater. Today Proc., 2016, vol. 3, pp. 3094–3103.10.1016/j.matpr.2016.09.025 ↗
38. S. Miura, T. Hatabata, and T. Okawa: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1136–47.10.1007/s11661-013-2118-8 ↗
39. ASTM International: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials: ASTM E399-12, ASTM, West Conshohocken, 2012.
40. A. Takeuchi and A. Inoue: Mater. Trans., 2005, vol. 46, pp. 2817–29.10.2320/matertrans.46.2817 ↗
41. Q. Wang, T.Y. Zhao, and R.R. Chen: Mater. Sci. Eng. A, 2021, vol. 804, p. 140789.10.1016/j.msea.2021.140789 ↗
42. V.O.D. Santos, H.M. Petrilli, and L. Eleno: CALPHAD-Comput. Coupling Phase Diagr. Thermochem., 2015, vol. 51, pp. 57–66.10.1016/j.calphad.2015.08.001 ↗
43. F. Gang, A. Kauffmann, and M. Heilmaier: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 763–71.10.1007/s11661-017-4367-4 ↗
44. S. Zhang, L. Wei, and J. Sha: Prog. Nat. Sci., 2018, vol. 28, pp. 96–104.
45. S. Zhang and X.P. Guo: Intermetallics, 2015, vol. 57, pp. 83–92.10.1016/j.intermet.2014.10.007 ↗
46. G. Qin, R.R. Chen, and P.K. Liaw: Nanoscale, 2020, vol. 12, pp. 3965–76.10.1039/C9NR08338C ↗
47. N. Sekido, Y. Kimura, and S. Miura: J. Alloys Compd., 2006, vol. 425, pp. 223–29.10.1016/j.jallcom.2006.01.071 ↗
48. Y. Guo, L. Jia, and B. Kong: Intermetallics, 2017, vol. 92, pp. 1–6.10.1016/j.intermet.2017.09.005 ↗
49. R.M. Nekkanti and D.M. Dimiduk: Mater. Res. Soc. Symp. Proc., 1990, vol. 194, pp. 175–82.10.1557/PROC-194-175 ↗
50. R.W. Armstrong: Eng. Fract. Mech., 1987, vol. 28, pp. 529–38.10.1016/0013-7944(87)90050-6 ↗
51. B. Kong and L.N. Jia: Adv. Eng. Mater., 2017, vol. 19, p. 1700442.10.1002/adem.201700442 ↗
52. M.E. Schlesinger, H. Okamoto, and A.B. Gokhale: J. Phase Equilib., 1993, vol. 14, pp. 502–09.10.1007/BF02671971 ↗
53. R. Ma and X.P. Guo: J. Alloys Compd., 2021, vol. 870, p. 159437.10.1016/j.jallcom.2021.159437 ↗
54. Y. Li, C. Li, and Z. Du: CALPHAD-Comput. Coupling Phase Diagr. Thermochem., 2013, vol. 43, pp. 112–23.10.1016/j.calphad.2013.04.004 ↗
55. S. Zhang and X. Guo: Intermetallics, 2015, vol. 64, pp. 51–58.10.1016/j.intermet.2015.04.017 ↗
56. Y. Qiao, X.P. Guo, and Y Zeng. Intermetallics, 2017, vol. 88, pp. 19–27.10.1016/j.intermet.2017.04.008 ↗
57. M. Xiao, X.P. Guo, and M. Fu: Intermetallics, 2018, vol. 98, pp. 11–17.10.1016/j.intermet.2018.04.007 ↗
58. Y. Wang, L. Jia, and G. Sun: Int. J. Refract. Met. Hard Mater., 2020, vol. 94, p. 105359.10.1016/j.ijrmhm.2020.105359 ↗
59. Z. Li and L.M. Peng: Acta Mater., 2007, vol. 55, pp. 6573–85.10.1016/j.actamat.2007.08.012 ↗