Effect of Zr or Ga Addition and Annealing on Microstructural Evolution, Deformation and Fracture Behaviour of Nb-19Si-5Mo-20Ti Based Hypereutectic Alloy
Source abstract
Abstract
The effect of Zr or Ga additions (3 at.pct each) on the evolution of microstructure and mechanical properties of the Nb-19Si-5Mo-20Ti (base) alloy in as cast or annealed (1500 °C/100 hours) condition has been examined. The as cast microstructures of both Zr and Ga containing alloys have exhibited (β + α)-5-3 silicide phase as primary dendritic phase or as eutectic constituent besides niobium-rich solid solution (Nbss). Zr-rich γ-5-3 silicide is found in the eutectic with mixed lamellar or non-lamellar morphology in the Zr containing alloy, whereas non-lamellar eutectic with β-Tiss at interfaces have been observed in the Ga added alloys. On annealing, the amount of eutectic surrounding the primary 5-3 silicide dendrites in as-cast microstructures increases along with increase in the size of Nbss, causing a noticeable decrease of hardness along with increase of dynamic Young’s modulus (E) to 187–190 GPa (E = 163 and 179 GPa for as cast Zr and Ga containing alloys, respectively) due to β → α 5-3 silicide transformation and partitioning of Mo to Nbss. The post-anneal fracture toughness is increased on addition of Zr (~ 35.5 pct) and Ga (~ 18.2 pct) to ~ 14.9 ± 0.2 and ~ 13 ± 0.1 MPa√m, respectively, where toughening is facilitated by arrest, bridging or deflection of cracks by ductile Nbss phase. The room temperature compressive strengths (~ 2600 to 2900 MPa) of the as-cast alloys, having an inverse relationship with Nbss content, are reduced by ~ 13 pct with ~ 1.3 and ~ 1.5 times increase in ductility on annealing for Zr and Ga containing alloys, respectively. The compressive yield strength in the range of 900 °C to 1100 °C is increased more on alloying with Ga than Zr. However, the strength retention of both the alloys decreases with increasing temperature by thermally activated deformation of Nbss. Controlled alloying of hypereutectic Nb-Si-Mo-Ti with Zr or Ga along with annealing provides a strategy for simultaneous increase of both strength and fracture toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. D.M. Dimiduk and J.H. Perepezko: MRS Bull., 2003, vol. 28, pp. 639–45.10.1557/mrs2003.191 ↗
2. B.P. Bewlay, M.R. Jackson, J. Zhao, and P.R. Subramanian: Metall Mater. Trans., 2003, vol. 34A, pp. 2043–52.10.1007/s11661-003-0269-8 ↗
3. K.S. Chan: Metall. Mater. Trans. A., 2003, vol. 34A, pp. 2315–28.10.1007/s11661-003-0295-6 ↗
4. Y. Li, X. Lin, Y. Hu, N. Kang, X. Gao, H. Dong, and W. Huang: J. Alloys Compd., 2019, vol. 783, pp. 66–76.10.1016/j.jallcom.2018.12.280 ↗
5. C.L. Ma, Y. Tan, H. Tanaka, A. Kasama, R. Tanaka, S. Miura, Y. Mishima, and S. Hanada: Mater. Trans. JIM., 2000, vol. 41, pp. 1329–36.10.2320/matertrans1989.41.1329 ↗
6. S. Kashyap, C.S. Tiwary, and K. Chattopadhyay: Intermetallics., 2011, vol. 19, pp. 1943–52.10.1016/j.intermet.2011.05.018 ↗
7. M. Sankar, G. Phanikumar, V. Singh, and V.V.S. Prasad: Intermetallics., 2018, vol. 101, pp. 123–32.10.1016/j.intermet.2018.07.010 ↗
8. Y.X. Tian, J.T. Guo, G.M. Cheng, L.Y. Sheng, L.Z. Zhou, L.L. He, and H.Q. Ye: Mater. Des., 2009, vol. 30, pp. 2274–77.10.1016/j.matdes.2008.08.016 ↗
9. W. Kim, H. Tanaka, A. Kasama, R. Tanaka, and S. Hanada: Intermetallics., 2001, vol. 9, pp. 521–27.10.1016/S0966-9795(01)00034-6 ↗
10. E. Guo, S.S. Singh, C. Mayer, X. Meng, Y. Xu, L. Luo, M. Wang, and N. Chawla: J. Alloys Compd., 2017, vol. 704, pp. 89–100.10.1016/j.jallcom.2017.02.054 ↗
11. W. Liu, H.P. Xiong, N. Li, S.Q. Guo, and R.Y. Qin: Acta Metall. Sin., 2018, vol. 31, pp. 362–70.10.1007/s40195-017-0619-y ↗
12. B.P. Bewlay, M.R. Jackson, and M.F.X. Gigliotti: Intermet. Compd. Princ. Pract., 2002, vol. 4, pp. 541–60.
13. W. Li, H.B. Yang, A.D. Shan, and J.S. Wu: Mater. Sci. Forum., 2004, vol. 449–452, pp. 753–56.10.4028/www.scientific.net/MSF.449-452.753 ↗
14. C.S. Tiwary, S. Kashyap, and K. Chattopadhyay: Mater. Sci. Technol., 2013, vol. 29, pp. 702–9.10.1179/1743284713Y.0000000203 ↗
15. K.S. Chan: Mater. Sci. Eng. A., 2002, vol. 329–331, pp. 513–22.10.1016/S0921-5093(01)01502-7 ↗
16. K. Sala and R. Mitra: Metall. Mater. Trans. A., 2021, vol. 52, pp. 3436–59.10.1007/s11661-021-06316-3 ↗
17. S. Miura, M. Aoki, Y. Saeki, K. Ohkubo, and Y. Mishima: Metall. Mater. Trans. A., 2005, vol. 36A, pp. 489–96.10.1007/s11661-005-0162-8 ↗
18. Y. Qiao, X. Guo, and Y. Zeng: Intermetallics., 2017, vol. 88, pp. 19–27.10.1016/j.intermet.2017.04.008 ↗
19. Y.X. Tian, J.T. Guo, L.Y. Sheng, G.M. Cheng, L.Z. Zhou, L.L. He, and H.Q. Ye: Intermetallics., 2008, vol. 16, pp. 807–12.10.1016/j.intermet.2008.03.005 ↗
20. M. Sankar, G. Phanikumar, and V.V.S. Prasad: Mater. Sci. Eng. A., 2019, vol. 754, pp. 224–31.10.1016/j.msea.2019.03.078 ↗
21. S. Kashyap, C.S. Tiwary, and K. Chattopadhyay: Mater. Sci. Eng. A., 2013, vol. 559, pp. 74–85.10.1016/j.msea.2012.08.027 ↗
22. Y. Li, C. Ma, H. Zhang, and S. Miura: Mater. Sci. Eng. A., 2011, vol. 528, pp. 5772–77.10.1016/j.msea.2011.04.011 ↗
23. K. Sala, S. Morankar, and R. Mitra: Metall. Mater. Trans. A., 2021, vol. 52, pp. 1185–211.10.1007/s11661-021-06155-2 ↗
24. K. Sala, S.K. Kashyap, and R. Mitra: Intermetallics., 2021, vol. 138, p. 107338.10.1016/j.intermet.2021.107338 ↗
25. K. Chattopadhyay, R. Mitra, and K.K. Ray: Metall. Mater. Trans. A., 2008, vol. 39A, pp. 577–92.10.1007/s11661-007-9398-9 ↗
26. K. Sala and R. Mitra: Mater. Sci. Eng. A., 2021, vol. 802, p. 140663.10.1016/j.msea.2020.140663 ↗
27. S. Roy, J. Gebert, G. Stasiuk, R. Piat, and K. André: Mater. Sci. Eng. A., 2011, vol. 528, pp. 8226–35.10.1016/j.msea.2011.07.029 ↗
28. M.U. Cohen: Rev. Sci. Instrum., 1935, vol. 6, pp. 68–74.10.1063/1.1751937 ↗
29. M.U. Cohen: Rev. Sci. Instrum., 1936, vol. 7, p. 155.10.1063/1.1752101 ↗
30. B.D. Cullity: Elements of X-Ray Diffraction, 2nd ed. Addison-Wesley, Wokingham, 1978.
31. L.M. Peng, Z. Li, H. Li, J.H. Wang, and M. Gong: J. Alloys Compd., 2006, vol. 414, pp. 100–6.10.1016/j.jallcom.2005.07.024 ↗
32. L.M. Peng, Z. Li, and H. Li: J. Mater. Sci., 2006, vol. 41, pp. 7524–29.10.1007/s10853-006-0836-7 ↗
33. K. Zelenitsas and P. Tsakiropoulos: Intermetallics., 2005, vol. 13, pp. 1079–95.10.1016/j.intermet.2005.02.002 ↗
34. M.R. Jackson, B.P. Bewlay, R.G. Rowe, D.W. Skelly, and H.A. Lipsitt: JOM., 1996, vol. 48, pp. 39–44.10.1007/BF03221361 ↗
35. B.P. Bewlay, M.R. Jackson, and P.R. Subramanian: JOM., 1999, vol. 51, pp. 32–6.10.1007/s11837-999-0077-8 ↗
36. S. Zhang and X. Guo: Intermetallics., 2016, vol. 70, pp. 33–44.10.1016/j.intermet.2015.12.002 ↗
37. M.E. Schlesinger, H. Okamoto, and A.B. Gokhale: R. Abbaschian., 1993, vol. 14, pp. 502–3.
38. W. Li, H. Yang, A. Shan, L. Zhang, and J. Wu: Intermetallics., 2006, vol. 14, pp. 392–95.10.1016/j.intermet.2005.07.001 ↗
39. F. Wang, L. Luo, X. Meng, Y. Xu, L. Wang, Y. Su, J. Guo, and H. Fu: J. Alloys Compd., 2018, vol. 741, pp. 51–8.10.1016/j.jallcom.2018.01.112 ↗
40. S.H. Pitman: Development of NbSi2 base intermetallic alloys, PhD dissertation, University of Surrey, 1996.
41. M. Bulanova and I. Fartushna: in Ternary Alloy Systems: Phase Diagrams, Crystallographic and Thermodynamic Data, Springer, 2010, pp. 505–22
42. R. Abbaschian and M.D. Lipschutz: Mater. Sci. Eng. A., 1997, vol. 226–228, pp. 13–21.10.1016/S0921-5093(97)80022-6 ↗
43. J. Nelson, M. Ghadyani, C. Utton, and P. Tsakiropoulos: Materials (Basel)., 2018, vol. 11, p. 1579.10.3390/ma11091579 ↗
44. N. Sekido, Y. Kimura, S. Miura, and Y. Mishima: Mater. Trans., 2004, vol. 45, pp. 3264–71.10.2320/matertrans.45.3264 ↗
45. J.C.J. Gigolotti, G.C. Coelho, C.A. Nunes, P.A. Suzuki, and J.M. Joubert: Intermetallics., 2017, vol. 82, pp. 76–92.10.1016/j.intermet.2016.04.006 ↗
46. S. Miura, K. Ohkubo, and T. Mohri: Mater. Res. Soc. Symp. Proc., 2005, vol. 842, pp. S5311–16.
47. J.L. Murray: Bull. Alloy Phase Diagrams., 1981, vol. 2, pp. 197–200.10.1007/BF02881478 ↗
48. K.C.H. Kumar, P. Wollants, and L. Delaey: J. Alloys. Compd., 1994, vol. 206, pp. 121–27.10.1016/0925-8388(94)90019-1 ↗
49. J.L. Murray: Bull. Alloy Phase Diagrams., 1985, vol. 6, pp. 327–30.10.1007/BF02880510 ↗
50. M. Hansen, E.L. Kamen, H.D. Kessler, and D.J. McPherson: JOM., 1951, vol. 3, pp. 881–88.10.1007/BF03397396 ↗
51. N.V. Antonova and L.A. Tretyachenko: J. Alloys Compd., 2001, vol. 318, pp. 398–405.10.1016/S0925-8388(00)01416-X ↗
52. X.J. Han and B. Wei: Metall. Mater. Trans. A., 2002, vol. 33, pp. 1221–8.10.1007/s11661-002-0223-1 ↗
53. M. Li and K. Kuribayashi: Metall. Mater. Trans. A., 2003, vol. 34, pp. 2999–3008.10.1007/s11661-003-0199-5 ↗
54. K. Chattopadhyay, R. Sinha, R. Mitra, and K.K. Ray: Mater. Sci. Eng. A., 2007, vol. 456, pp. 358–63.10.1016/j.msea.2006.12.023 ↗
55. B.P. Bewlay and M.R. Jackson: J. Phase Equilib., 1998, vol. 19, pp. 577–86.10.1361/105497198770341789 ↗
56. S. Zhang and X. Guo: Mater. Sci. Eng. A., 2015, vol. 638, pp. 121–31.10.1016/j.msea.2015.04.003 ↗
57. Y. Sainan, J. Lina, S. Linfen, M. Limin, and Z. Hu: Intermetallics., 2013, vol. 38, pp. 102–6.10.1016/j.intermet.2013.02.022 ↗
58. J.C. Slater: J. Chem. Phys., 1964, vol. 41, pp. 3199–204.10.1063/1.1725697 ↗
59. G. Shao and P. Tsakiropoulos: Mater. Sci. Eng. A., 1999, vol. 271, pp. 286–90.10.1016/S0921-5093(99)00223-3 ↗
60. S. Diplas, G. Shao, S.A. Morton, P. Tsakiropoulos, and J.F. Watts: Intermetallics., 1999, vol. 7, pp. 937–46.10.1016/S0966-9795(98)00146-0 ↗
61. P. Maji, R. Mitra, and K.K. Ray: Intermetallics., 2017, vol. 85, pp. 34–47.10.1016/j.intermet.2017.01.012 ↗
62. Y. Chen, J.X. Shang, and Y. Zhang: Phys. Rev. B., 2007, vol. 76, pp. 1–8.
63. I. Papadimitriou, C. Utton, A. Scott, and P. Tsakiropoulos: Intermetallics., 2014, vol. 54, pp. 125–32.10.1016/j.intermet.2014.05.020 ↗
64. Y. Chen, T. Hammerschmidt, D.G. Pettifor, J.X. Shang, and Y. Zhang: Acta Mater., 2009, vol. 57, pp. 2657–64.10.1016/j.actamat.2009.02.014 ↗
65. S. Shi, L. Zhu, L. Jia, H. Zhang, and Z. Sun: Comput. Mater. Sci., 2015, vol. 108, pp. 121–27.10.1016/j.commatsci.2015.06.019 ↗
66. J. Kim, T. Tabaru, H. Hirai, A. Kitahara, and S. Hanada: Mater. Trans., 2002, vol. 43, pp. 2201–204.10.2320/matertrans.43.2201 ↗
67. C.H. Shang, D. Van Heerden, A.J. Gavens, and T.P. Weihs: Acta Mater., 2000, vol. 48, pp. 3533–43.10.1016/S1359-6454(00)00125-7 ↗
68. W. Xu, J. Han, C. Wang, Y. Zhou, Y. Wang, Y. Kang, B. Wen, X. Liu, and Z.K. Liu: Intermetallics., 2014, vol. 46, pp. 72–79.10.1016/j.intermet.2013.10.027 ↗
69. K. Chattopadhyay, G. Balachandran, R. Mitra, and K.K. Ray: Intermetallics., 2006, vol. 14, pp. 1452–60.10.1016/j.intermet.2006.01.054 ↗
70. M.E. Fine, L.D. Brown, and H.L. Marcus: Scr. Metall., 1984, vol. 18, pp. 951–56.10.1016/0036-9748(84)90267-9 ↗
71. C. Smithells: Metal References, 5th ed. Butterworth, London, 1976.
72. P. Tsakiropoulos: Materials (Basel)., 2018, vol. 11, p. 69.10.3390/ma11010069 ↗
73. K.T. Faber and A.G. Evans: Acta Metall., 1983, vol. 31, pp. 565–76.10.1016/0001-6160(83)90046-9 ↗
74. R. Mitra: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 1629–41.10.1007/s11661-998-0086-1 ↗
75. A. Khan, H.M. Chan, M.P. Harmer, and R.F. Cook: J. Am. Ceram. Soc., 2000, vol. 40, pp. 833–40.10.1111/j.1151-2916.2000.tb01282.x ↗
76. H. Guo and X. Guo: Scr. Mater., 2011, vol. 64, pp. 637–40.10.1016/j.scriptamat.2010.12.008 ↗
77. Y. Wang, S. Li, M. Wu, and Y. Han: Rare Met., 2011, vol. 30, pp. 326–30.10.1007/s12598-011-0296-3 ↗
78. F.F. Schmidt and H.R. Odgen: Defense Metals Information Center Battelle Memorial Institute Columbus 1, Ohio, 1963, pp. A-12–A-16.
79. F.J. Anders and W. Pollock: Tensile Properties and Rolling Textures of Niobium Sheet. The Technology of Columbium (Niobium), Wiley, New York, 1958.