Dry Sliding Wear Test on Borided AISI 1018 Steel Under Pin-on-Disc Configuration
Source abstract
Abstract
New results about the influence of a small iron borided layer (~ 36 µm) obtained by the powder-pack boriding process (PPBP) and diffusion annealing post-process (DAP) were evaluated. Dry sliding wear tests on PPBP, PPBP + DAP and untreated AISI 1018 steel were performed under the pin-on-disc configuration, and balls of Al2O3 and WC were used as a counterpart at different sliding distances. Also, the contact pressures of the layer/substrate system were evaluated using the finite element model with the aid of the ABAQUS software. The results showed that the Al2O3 ball presented the major coupling (ball-disc), and the PPBP + DAP reduces the specific wear rate around ~ 304 times related to the untreated AISI 1018 steel to 500 m under severe sliding conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. K. Holmberg and A. Matthews: Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier, London, 2009.
2. P. Gopalakrishnan, P. Shankar, R.V. Subba Rao, M. Sundar, and S.S. Ramakrishnan: Scr. Mater., 2001, vol. 44, pp. 707–12.10.1016/S1359-6462(00)00674-6 ↗
3. W. Fichtl: Mater. Des., 1981, vol. 2, pp. 276–86.10.1016/0261-3069(81)90034-0 ↗
4. R.A. García-Léon, J. Martínez-Trinidad, I. Campos-Silva, and W. Wong-Angel: DYNA (Colombia)., 2020, vol. 87, pp. 34–41.10.15446/dyna.v87n213.82924 ↗
5. I.E. Campos-Silva and G.A. Rodríguez-Castro: Thermochemical Surface Engineering of Steels, Woodhead Publishing, Oxford, 2015, pp. 651–702.10.1533/9780857096524.5.651 ↗
6. M. Kulka: Current Trends in Boriding: Techniques, Springer, Cham, 2019.10.1007/978-3-030-06782-3 ↗
7. M. Keddam and S.M. Chentouf: Appl. Surf. Sci., 2005, vol. 252, pp. 393–9.10.1016/j.apsusc.2005.01.016 ↗
8. S. Şahin: J. Mater. Process. Technol., 2009, vol. 209, pp. 1736–41.10.1016/j.jmatprotec.2008.04.040 ↗
9. I. Campos-Silva, M. Flores-Jiménez, D. Bravo-Bárcenas, H. Balmori-Ramírez, J. Andraca-Adame, J. Martínez-Trinidad, and J.A. Meda-Campaña: Surf. Coat. Technol., 2017, vol. 309, pp. 155–63.10.1016/j.surfcoat.2016.11.054 ↗
10. A.M. Delgado-Brito, D. López-Suero, A. Ruiz-Ríos, R.A. García-León, J. Martínez-Trinidad, J. Oseguera-Peña, and I. Campos-Silva: Ceram. Int., 2019, vol. 45, pp. 7767–77.10.1016/j.ceramint.2019.01.081 ↗
11. R.A. García-León, J. Martínez-Trinidad, and I. Campos-Silva: Trans. Indian Inst. Met., 2021, vol. 74, pp. 541–57.10.1007/s12666-020-02174-6 ↗
12. B. Bhushan: Modern Tribology Handbook, vol. 1, CRC Press, Boca Raton, 2001.
13. S.D. Cramer and B.S. Covino, eds.: Corrosion: Fundamentals, Testing, and Protection, vol. 13A, ASM international, Materials Park, 2003.
14. E. Garcia-Bustos, M.A. Figueroa-Guadarrama, G.A. Rodríguez-Castro, O.A. Gómez-Vargas, E.A. Gallardo-Hernández, and I. Campos-Silva: Surf. Coat. Technol., 2013, vol. 215, pp. 241–6.10.1016/j.surfcoat.2012.08.090 ↗
15. M. Keddam, M. Ortiz-Dominguez, M. Elias-Espinosa, A. Arenas-Flores, J. Zuno-Silva, D. Zamarripa-Zepeda, and O.A. Gomez-Vargas: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, vol. 49A, pp. 1895–907.10.1007/s11661-018-4535-1 ↗
16. A. Günen: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51A, pp. 927–39.10.1007/s11661-019-05577-3 ↗
17. S. Pal, R. Sarkar, and V. Jayaram: Metall. Mater. A Trans. Phys. Metall. Mater. Sci., 2018, vol. 49A, pp. 3217–36.10.1007/s11661-018-4599-y ↗
18. A. Bahrami, C.F. Onofre Carrasco, A.D. Cardona, T. Huminiuc, T. Polcar, and S.E. Rodil: Surf. Coat. Technol., 2019, vol. 364, pp. 22–31.10.1016/j.surfcoat.2019.02.072 ↗
19. R.C. Morón, G.A. Rodríguez-Castro, D.V. Melo-Máximo, J. Oseguera, A. Bahrami, S. Muhl, and I. Arzate-Vázquez: Surf. Coat. Technol., 2019, vol. 375, pp. 793–801.10.1016/j.surfcoat.2019.07.085 ↗
20. A. Bahrami, J.P. Álvarez, O. Depablos-Rivera, R. Mirabal-Rojas, A. Ruíz-Ramírez, S. Muhl, and S.E. Rodil: Adv. Eng. Mater., 2018, vol. 20, p. 1700687.10.1002/adem.201700687 ↗
21. A. Bahrami, A. Delgado, C. Onofre, S. Muhl, and S.E. Rodil: Surf. Coat. Technol., 2019, vol. 374, pp. 690–9.10.1016/j.surfcoat.2019.06.061 ↗
22. C.D. Reséndiz-Calderon, G.A. Rodríguez-Castro, A. Meneses-Amador, I.E. Campos-Silva, J. Andraca-Adame, M.E. Palomar-Pardavé, and E.A. Gallardo-Hernández: J. Mater. Eng. Perform., 2017, vol. 26, pp. 5599–609.10.1007/s11665-017-3004-0 ↗
23. E.J. Hernández-Ramírez, A. Guevara-Morales, U. Figueroa-López, and I. Campos-Silva: Mater. Lett., 2020, vol. 277, p. 128297.10.1016/j.matlet.2020.128297 ↗
24. R. Carrera-Espinoza, U. Figueroa-López, J. Martínez-Trinidad, I. Campos-Silva, E. Hernández-Sánchez, and A. Motallebzadeh: Wear., 2016, vol. 362–363, pp. 1–7.10.1016/j.wear.2016.05.003 ↗
25. A. Meneses-Amador, L.F. Jiménez-Tinoco, C.D. Reséndiz-Calderon, A. Mouftiez, G.A. Rodríguez-Castro, and I. Campos-Silva: Surf. Coat. Technol., 2015, vol. 284, pp. 182–91.10.1016/j.surfcoat.2015.06.088 ↗
26. A. Meneses-Amador, D. Sandoval-Juárez, G.A. Rodríguez-Castro, D. Fernández-Valdés, I. Campos-Silva, R.C. Vega-Morón, and J.L. Arciniega-Martínez: Surf. Coat. Technol., 2018, vol. 353, pp. 346–54.10.1016/j.surfcoat.2018.07.104 ↗
27. J. Di, S. Sen Wang, L. Zhang, L. Xi Cai, and Y. Hui Xie: Surf. Coat. Technol., 2018, vol. 333, pp. 115–24.10.1016/j.surfcoat.2017.10.042 ↗
28. G. Totten, M. Howes, and T. Inoue: Handbook of Residual Stress and Deformation of Steel, ASM Intern, Materials Park, 2002.
29. A. Ravikiran and S. Jahanmir: Wear., 2001, vol. 251, pp. 980–4.10.1016/S0043-1648(01)00739-6 ↗
30. V. Saikko: Proc. Inst. Mech. Eng. Part h J. Eng. Med., 2006, vol. 220, pp. 723–31.10.1243/09544119JEIM146 ↗
31. N. Ye and K. Komvopoulos: J. Tribol., 2003, vol. 125, pp. 52–9.10.1115/1.1497360 ↗
32. Dassault Systèmes: Notes, 2012.
33. K. Komvopoulos: J. Tribol., 1988, vol. 110, pp. 477–85.10.1115/1.3261653 ↗
34. M. Bodude, O. Adigun, and a Ibrahim: FUOYE J. Eng. Technol., 2020, vol. 5, pp. 102–5.10.46792/fuoyejet.v5i1.424 ↗
35. ASTM-G99-05: Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus 1, United States, 2005.
36. R.A. García-León, J. Martínez-Trinidad, I. Campos-Silva, U. Figueroa-López, and A. Guevara-Morales: Tribol. Int., 2021, vol. 163, p. 107161.10.1016/j.triboint.2021.107161 ↗
37. A.G. Matuschka: Boronising, Carl Hanser Verlag, München, 1980.
38. C. Martini, G. Palombarini, G. Poli, and D. Prandstraller: Wear., 2004, vol. 256, pp. 608–13.10.1016/j.wear.2003.10.003 ↗
39. J.R. Davis: Surface Hardening of Steels: Understanding the Basics, 1st ed., vol. 46, ASM Int., Materials Park, 2002.
40. J. Zhong, W. Qin, X. Wang, E. Medvedovski, J.A. Szpunar, and K. Guan: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2019, vol. 50A, pp. 58–62.10.1007/s11661-018-5002-8 ↗
41. J. Dossett and G.E. Totten: ASM Handbook, Volume 4A: Steel Heat Treating Fundamentals and Processes, ASM Intern, Materials Park, 2013.10.31399/asm.hb.v04a.9781627081658 ↗
42. I. Campos, O. Bautista, G. Ramírez, M. Islas, J. De La Parra, and L. Zúñiga: Appl. Suface Sci., 2005, vol. 243, pp. 429–36.10.1016/j.apsusc.2004.09.099 ↗
43. I.S. Dukarevich, M.V. Mozharov, and A.S. Shigarev: Met. Sci. Heat Treat., 1973, vol. 15, pp. 160–2.10.1007/BF00679753 ↗
44. ASTM: ASTM Int., 2017, vol. I, p. 12.
45. C. Badini, C. Gianoglio, and G. Pradelli: Surf. Coat. Technol., 1987, vol. 30, pp. 157–70.10.1016/0257-8972(87)90140-X ↗
46. D. Fernández-Valdés, A. Meneses-Amador, G.A. Rodríguez-Castro, I. Arzate-Vázquez, I. Campos-Silva, and J.L. Nava-Sánchez: Surf. Coat. Technol., 2019, vol. 377, p. 124871.10.1016/j.surfcoat.2019.07.082 ↗
47. D. Fernández-Valdés, A. Meneses-Amador, A. Ocampo-Ramírez, A. López-Liévano, U. Figueroa-López, G.A. Rodríguez-Castro, and I. Campos-Silva: J. Mater. Eng. Perform., 2020, https://doi.org/10.1007/s11665-020-05368-7.10.1007/s11665-020-05368-7 ↗
48. C.C. Viáfara and A. Sinatora: Wear., 2009, vol. 267, pp. 425–32.10.1016/j.wear.2008.11.019 ↗
49. C.C. Viáfara and A. Sinatora: Wear., 2011, vol. 271, pp. 1689–700.10.1016/j.wear.2010.12.085 ↗
50. G. Yi-cheng, Y. Mao-zhong, and L. Li-ya: Trans. Nonferr. Met. Soc. China., 2007, vol. 17, pp. 570–4.10.1016/S1003-6326(07)60135-6 ↗
51. K. De Moerlooze: Wear., 2010, vol. 269, pp. 183–9.10.1016/j.wear.2010.02.008 ↗
52. Y. Liu, T.W. Liskiewicz, and B.D. Beake: Wear., 2019, vol. 428–429, pp. 366–75.10.1016/j.wear.2019.04.004 ↗
53. G.S. Fox-Rabinovich, S.C. Veldhuis, V.N. Scvortsov, L.S. Shuster, G.K. Dosbaeva, and M.S. Migranov: Thin Solid Films., 2004, vol. 469–470, pp. 505–12.10.1016/j.tsf.2004.07.038 ↗
54. I.M. Hutchings: Tribology: Friction and Wear of Engineering Materials, Edward Arn, London, 1992.
55. B. Bhushan: Principles and Application of Tribology, Wiley-Inte, New York, 1999.
56. R.A. García-León, J. Martinez-Trinidad, R. Zepeda-Bautista, I. Campos-Silva, A. Guevara-Morales, J. Martínez-Londoño, and J. Barbosa-Saldaña: Tribol. Int., 2021, vol. 157, p. 106885.10.1016/j.triboint.2021.106885 ↗
57. E. Atar, E.S. Kayali, and H. Cimenoglu: Surf. Coat. Technol., 2008, vol. 202, pp. 4583–90.10.1016/j.surfcoat.2008.03.011 ↗
58. R.A. García-León, J. Martínez-Trinidad, I. Campos-Silva, U. Figueroa-López, and A. Guevara-Morales: Mater. Lett., 2020, https://doi.org/10.1016/j.matlet.2020.128842.10.1016/j.matlet.2020.128842 ↗
59. M.H. Evans: Mater. Sci. Technol., 2012, vol. 28, pp. 3–22.10.1179/026708311X13135950699254 ↗