The Application of Differential Scanning Calorimetry to Investigate Precipitation Behavior in Nickel-Base Superalloys Under Continuous Cooling and Heating Conditions
Source abstract
Abstract
A suite of experimental tools and fast-acting, numerical-simulation techniques was used to quantify the precipitation behavior of three nickel-base superalloys: IN-100, LSHR, and 718. Experimental methods comprised differential scanning calorimetry (DSC) to establish the specific heat as a function of temperature and selected direct-resistance heating trials (using a Gleeble® machine) to obtain samples for microstructural analysis. For the DSC experiments, each alloy was cooled at a prescribed constant rate (between 5 and 20 K/min) after an initial soak/equilibration in the high-temperature, single-phase (supersolvus) temperature regime. On-heating DSC trials beginning at ambient temperature were also performed on alloy 718 in three different starting conditions: super-δ-solvus solution treated and water quenched (denoted as ST), solution treated and aged (STA), and solution treated and overaged (STOA). DSC results, revealing the thermal signatures associated with the kinetics of precipitation of γ′ (IN-100, LSHR) or γ′ and γ″ (718), were interpreted using a previously-developed fast-acting routine that treats concurrent nucleation, growth, coarsening, and dissolution. For these simulations, special attention was paid to various thermo-kinetic input parameters including equilibrium solvus-approach curves, bulk free energies of transformation, matrix-precipitate interface energies, and effective diffusivities. For the γ-γ′ superalloys (IN-100 and LSHR), estimates of precipitate volume fraction as a function of temperature from the specific-heat data revealed semi-quantitative agreement with simulation predictions. For the γ-γ′-γ″ superalloy (718), simulation predictions of precipitate volume fractions were converted to specific heat as a function of temperature and showed semi-quantitative agreement with the direct measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. M. J. Donachie: Superalloys: Source Book, ASM International, Materials Park, OH, 1984.
2. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
3. T.M. Pollock and S. Tin: J. Propulsion and Power, 2006, vol. 22, pp. 361-374.10.2514/1.18239 ↗
4. Y.C. Fayman: Mater. Sci. Eng., 1987, vol. 92, pp. 159-171.10.1016/0025-5416(87)90166-2 ↗
5. J.W. Brooks and P.J. Bridges: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Mauer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 33–42.10.7449/1988/Superalloys_1988_33_42 ↗
6. A. Oradei-Basile and J.F. Radovich: in Superalloys 718, 625, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
7. C.I. Garcia, A.K. Lis, E.A. Loria, and A.J. DeArdo: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 527–36.10.7449/1992/Superalloys_1992_527_536 ↗
8. H. Chandler: Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM International, Materials Park, OH, 1996.
9. C. Slama and G. Cizeron: Etude du Comportement Structural de l’Alliage NC 19 Fe Nb (Inconel 718), J. de Physique III, 1997, vol. 7, pp. 665–88.10.1051/jp3:1997148 ↗
10. A. Thomas, M. El-Wahabi, J.M. Cabrera, and J.M. Prado: J. Mater. Proc. Technol., vol. 177, 2006, pp. 469-472.10.1016/j.jmatprotec.2006.04.072 ↗
11. S.T. Wlodek, M. Kelly, D.A. Alden: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 129–36.10.7449/1996/Superalloys_1996_129_136 ↗
12. D. U. Furrer: DEng Thesis, University of Ulm, Ulm, Germany, 1999.
13. D. U. Furrer and H. J. Fecht: Scripta Mater., 1999, vol. 40, pp. 1215-1220.10.1016/S1359-6462(99)00094-9 ↗
14. R.J. Mitchell, M.C. Hardy, M. Preuss, and S. Tin: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 361–70.10.7449/2004/Superalloys_2004_361_370 ↗
15. H-S. Liu, L. Zhang, X-B. He, X-H. Qu, Z. Li, and G-Q. Zhang: Rare Metals, 2013, vol. 32, pp. 560-563.10.1007/s12598-013-0072-7 ↗
16. S.L. Semiatin, F. Zhang, J.S. Tiley, and D.U. Furrer: Mater. at High Temp., 2016, vol. 33, p. 301-309.10.1080/09603409.2016.1165449 ↗
17. C. Papadaki, W. Li, A.M. Korsunsky: Materials, 2018, vol. 11 (1528), pp. 1-10.
18. S.L. Semiatin, N.C. Levkulich, and J.S. Tiley: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5281-5296.10.1007/s11661-019-05422-7 ↗
19. A. Niang, B. Viguier, and J. Lacaze: Mater. Characterization, 2010, vol. 61, pp. 525-534.10.1016/j.matchar.2010.02.011 ↗
20. B.T. Alexandrov, J.C. Lippold, and S.J. Norton: U.S. Patent 7,909,505 B2, March 2011.
21. D.M. Collins, D.J. Crudden, E. Alabort, T. Connolley, and R.C. Reed: Acta Mater., 2015, vol. 94, pp. 244-256.10.1016/j.actamat.2015.04.046 ↗
22. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, S.Y. Zhang, J. Zhang, and H.B. Dong: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 574-585.10.1007/s11661-019-05536-y ↗
23. J. Cormier, P. Gadaud, M. Czaplicki, R.Y. Zhang, H.B. Dong, T.M. Smith, F. Zhang, J.S. Tiley, and S.L. Semiatin: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 500–11.10.1007/s11661-020-06078-4 ↗
24. T.P. Gabb, D.G. Backman, D.Y. Wei, D.P. Mourer, D.U. Furrer, A. Garg, and D.L. Ellis: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 405–14.10.7449/2000/Superalloys_2000_405_414 ↗
25. H.J. Jou, P.W. Voorhees, and G.B. Olson: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 877–86.10.7449/2004/Superalloys_2004_877_886 ↗
26. G.B. Olson, H.J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci, and D. Hull: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 923–32.10.7449/2008/Superalloys_2008_923_932 ↗
27. R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Polt, and E. Kozeschnik: Acta Mater., 2009, vol. 57, pp. 5739-5747.10.1016/j.actamat.2009.08.002 ↗
28. B. Wang, F. Zhang, W. Cao, S. Chen, and S. Kou: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 115-122.10.1007/s11661-014-2617-2 ↗
29. S.L. Semiatin, S-L. Kim, F. Zhang, and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1715-1730.10.1007/s11661-015-2748-0 ↗
30. M.J. Anderson, F. Schulz, Y. Lu, H. Kitaguchi, P. Bowen, C. Argyrakis, and H.C. Basoalto: Acta Mater., 2020, vol. 161, pp. 81-100.10.1016/j.actamat.2020.03.058 ↗
31. I.J. Moore, M.G. Burke, and E.J. Palmiere: Acta Mater., 2016, vol. 119, pp. 157-166.10.1016/j.actamat.2016.08.027 ↗
32. R. Radis, G.A. Zickler, M. Stockinger, C. Sommitsch, and E. Kozeschnik: in Proc. 7th International Sympsium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjoberg, and A. Wusatowski-Sarnek, eds. TMS, Warrendale, PA, 2010, pp. 569–78.
33. K. Wu, F. Zhang, S. Chen, W. Cao, and Y.A. Chang: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 933–39.10.7449/2008/Superalloys_2008_933_939 ↗
34. D. Furrer, V. Venkatesh, F. Zhang, D. Gynther, T. Asare, D. Novikov, and S. Burlatsky: in Proc. 8th International Sympsium on Superalloy 718 and Derivatives, E.A. Ott, A. Banik, X. Liu, I. Dempster, K. Heck, J. Andersson, J. Groh, T. Gabb, R. Helmink, and A. Wusatowska-Sarnek, eds. TMS, Warrendale, PA, 2014, pp. 81–94.
35. F. Zhang, W. Cao, C. Zhang, S. Chen, J. Zhu, and D. Lv: in Proceedings, 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, E. Ott, ed., TMS, Pittsburgh, 2018, pp. 147–61.10.1007/978-3-319-89480-5_8 ↗
36. A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, and M. Stockinger: Mater. Sci. Eng. A, 2018, vol. A723, pp. 314-323.10.1016/j.msea.2018.03.013 ↗
37. Z.K. Low, T. Chaise, D. Bardel, S. Cazottes, P. Chaudet, M. Perez, and D. Nelias: Acta Mater., 2018, vol. 156, pp. 31-42.10.1016/j.actamat.2018.06.005 ↗
38. S.L. Semiatin, J.S. Tiley, F. Zhang, T.M. Smith, R.Y. Zhang, H.B. Dong, P. Gadaud, and J. Cormier: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 483–99.10.1007/s11661-020-06092-6 ↗
39. Y.H. Wen, J.P. Simmons, C. Shen, C. Woodward, and Y. Wang: Acta Mater., 2003, vol. 51, pp. 1123-1132.10.1016/S1359-6454(02)00516-5 ↗
40. J.P. Simmons, Y. Wen, C. Shen, and Y. Wang: Mater. Sci. Eng. A, 2004, vol. A365, pp. 136-143.10.1016/j.msea.2003.09.019 ↗
41. M. Fleck, F. Schleifer, M. Holzinger, and U. Glatzel: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4146-4157.10.1007/s11661-018-4746-5 ↗
42. J. Gayda, T.P. Gabb, and P.T. Kantzos: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
43. T.P. Gabb, J. Gayda, J. Telesman, and P. T. Kantzos: NASA Report TM-2005-213645, Glenn Research Center, Cleveland, OH, June 2005.
44. R. Larsen and T. Goerz: Report 5287, Thermophysical Properties Research Laboratory, West Lafayette, IN, January 2015.
45. R.E. Taylor, H. Groot, D.L. Taylor, and J. Ferrier: Report 2969, Thermophysical Properties Research Laboratory, West Lafayette, IN, May 2003.
46. S.L. Semiatin, J.M. Shank, A.R. Shiveley, W.M. Saurber, E.F. Gaussa, and A.L. Pilchak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6231-6251.10.1007/s11661-014-2572-y ↗
47. T. Alam, M. Chaturvedi, S.P. Ringer, and J.M. Cairney: Mater. Sci. Eng. A, 2010, vol. A257, pp. 7770-7774.10.1016/j.msea.2010.08.053 ↗
48. A. Devaux, L. Naze, R. Molins, A. Pineau, A. Organista, J.Y. Guedou, J.F. Uginet, and P. Heritier: Mater. Sci. Eng. A, 2008, vol. A486, pp. 117-122.10.1016/j.msea.2007.08.046 ↗
49. D.P. Pishchur and V.A. Drebushchak: J. Therm. Analys. Calorim., 2016, vol. 124, pp. 951-958.10.1007/s10973-015-5186-8 ↗
50. V. Koci, J. Fort, J. Madera, L. Scheinherrova, A. Trnik, and R. Cerny: IEEE Trans. On Instrumentation and Measurement, 2020, vol. 69, pp. 8178-8186.10.1109/TIM.2020.2987454 ↗
51. S.L. Semiatin, N.C. Levkulich, A.E. Saurber, D.W. Mahaffey, E.J. Payton, and O.N. Senkov: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5567-5578.10.1007/s11661-017-4322-4 ↗
52. R. Wagner and R. Kampmann: in Materials Science and Technology, vol. 5, P. Haasen, ed., VCH, Weinheim, Germany, 1991, pp. 213–303.
53. S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, and D.U. Furrer: Integrating Mater. Mfg. Innovation, 2016, vol. 5 (3), pp. 1-20.
54. R. Przeliorz, F. Binczyk, P. Gradoin, M. Goral, and T. Mikuszewski: Archiv Foundry Eng., 2014, vol. 14 (3), pp. 67-70.10.2478/afe-2014-0064 ↗
55. A.Sh. Agazhanov, D.A. Samoshkin, and Yu.M. Kozlovskii: Proc. 35th Siberian Thermophysical Sem., J. Physics Conf. Series, 2019, vol. 1382 (012175), pp. 1–5.10.1088/1742-6596/1382/1/012175 ↗
56. A. Olguin, M. Ortiz, C.H. Worner, O. Herrera, B.K. Kad, and P.M. Hazzledine: Phil. Mag. B, 2001, vol. 81, pp. 731-744.10.1080/13642810108216539 ↗
57. W.F. Brown: Aerospace Structural Metals Handbook, CINDAS/USAF CRDA Handbooks Operation, Purdue University, West Lafayette, IN, 1998, Codes 4101 and 4112.
58. B.F. Dyson: in Proc. Euromat 2001, Remini, Italy, 2001. (CD ROM)
59. E.J. Payton: PhD Dissertation, the Ohio State University, Columbus, OH USA, 2009.
60. Y.F. Han: M.S. Thesis, University of Manitoba, Winnipeg, Canada, 1981.
61. T.M. Smith, N.M. Senanayake, C.K. Sudbrack, P. Bonacuse, R.B. Rogers, P. Chao, and J. Carter: Mater. Characterization, 2019, vol. 148, pp. 178-187.10.1016/j.matchar.2018.12.018 ↗
62. N. Saunders, M. Fahrmann, and C.J. Small: in Superalloys 2000, K.A. Green, T.M. Pollock, R.D. Kissinger, eds., TMS, Warrendale, PA, 2000, pp. 803–11.10.7449/2000/Superalloys_2000_803_811 ↗
63. P.M. Mignanelli, N.G. Jones, M.C. Hardy, and H.J. Stone: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 699-707.10.1007/s11661-017-4355-8 ↗