Analytical Description of the Criterion for the Columnar-To-Equiaxed Transition During Laser Beam Welding of Aluminum Alloys
Source abstract
Abstract
Abstract An equiaxed grain structure in a laser welded seam is beneficial. In current literature the material and process perspective are addressed separately. This paper combined the material and process perspective in one analytical expression in order to access a deeper understanding of the key parameters for an equiaxed solidification during laser beam welding. For this, the steady state model of Hunt for growth of equiaxed dendritic grains was combined with heat conduction calculations and nucleation theory. The derived analytical expression identified the minimum values of the welding parameters required for the growth of equiaxed dendritic grains and describe their interaction with the metallurgically given nucleation density. The theoretically derived analytical description agrees well with experimental results obtained with two different batches of EN AW-6016 over a wide-range of laser welding parameters. The analytical description summarizes the effects of nucleation processes, local solidification conditions and the influence of process parameters on the growth of equiaxed dendritic grains. Furthermore, the equation identifies the key alloy properties, which influence the required process parameter for an equiaxed solidification. For the first time, the full range of phenomena, including metallurgical and thermal effects, was merged in one analytical expression.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. P. Schempp and M. Rethmeier: Welding in the World, 2015, vol. 59, pp. 767–84.10.1007/s40194-015-0251-2 ↗
2. C. Hagenlocher, D. Weller, R. Weber, and T. Graf: Science and Technology of Welding and Joining, 2019, vol. 24, pp. 313–19.10.1080/13621718.2018.1534775 ↗
3. M. Braccini, C. Martin, and M. Suery: Modeling of Casting, Welding and Advanced Solidification Processes IX, 2000, pp. 18–24.
4. L. J. Barker: Trans. ASM, 1950, vol. 42, p. 347.
5. T. Sun, P. Franciosa, M. Sokolov, and D. Ceglarek: Procedia CIRP, 2020, vol. 94, pp. 565–70.10.1016/j.procir.2020.09.076 ↗
6. I. Maxwell and A. Hellawell: Acta Metallurgica, 1975, vol. 23, pp. 229–37.10.1016/0001-6160(75)90188-1 ↗
7. M. Johnsson, L. Backerud, and G. K. Sigworth: Metall and Mat Trans A, 1993, vol. 24, pp. 481–91.10.1007/BF02657335 ↗
8. D. H. StJohn, M. Qian, M. A. Easton, and P. Cao: Acta Materialia, 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
9. 9. A. L. Greer (2016) J. Chem. Phys. 145:21191310.1063/1.4968846 ↗
10. 10. E. Liotti, C. Arteta, A. Zisserman, A. Lui, V. Lempitsky, P. S. Grant (2018) Sci. Adv. 4:400410.1126/sciadv.aar4004 ↗
11. Y. Wang, Z. Que, T. Hashimoto, X. Zhou, and Z. Fan: Metall Mater Trans A, 2020, vol. 51, pp. 5743–57.10.1007/s11661-020-05950-7 ↗
12. Z. Fan, F. Gao, B. Jiang, and Z. Que: Scientific reports, 2020, vol. 10, p. 9448.10.1038/s41598-020-66190-8 ↗
13. W. Kurz, C. Bezençon, and M. Gäumann: Science and Technology of Advanced Materials, 2001, vol. 2, pp. 185–91.10.1016/S1468-6996(01)00047-X ↗
14. M. Gäumann, C. Bezençon, P. Canalis, and W. Kurz: Acta Materialia, 2001, vol. 49, pp. 1051–62.10.1016/S1359-6454(00)00367-0 ↗
15. Z. Tang and F. Vollertsen: Welding in the World, 2014, vol. 58, pp. 355–66.10.1007/s40194-014-0121-3 ↗
16. D. Zhang, A. Prasad, M. J. Bermingham, C. J. Todaro, M. J. Benoit, M. N. Patel, D. Qiu, D. H. StJohn, M. Qian, and M. A. Easton: Metall Mater Trans A, 2020, vol. 51, pp. 4341–59.10.1007/s11661-020-05880-4 ↗
17. J. H. Martin, B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler, and T. M. Pollock: Nature, 2017, vol. 549, pp. 365–69.10.1038/nature23894 ↗
18. C. Hagenlocher: Die Kornstruktur und der Heißrisswiderstand von Laserstrahlschweißnähten in Aluminiumlegierungen, München: utzverlag, 2020.
19. P. Schempp, C. E. Cross, A. Pittner, G. Oder, R. S. Neumann, H. Rooch, I. Dörfel, W. Österle, and M. Rethmeier: Welding Journal, 2014, vol. 93, pp. 53–59.
20. C. Hagenlocher, F. Fetzer, D. Weller, R. Weber, and T. Graf: Materials and Design, 2019, vol. 174, p. 107791.10.1016/j.matdes.2019.107791 ↗
21. J. D. Hunt: Materials Science and Engineering, 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
22. P. Schempp, C. E. Cross, A. Pittner, and M. Rethmeier: Metall and Mat Trans A, 2013, vol. 44, pp. 3198–210.10.1007/s11661-013-1649-3 ↗
23. DIN EN 573-3:2013-12: Aluminium and aluminium alloys - Chemical Composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2013 .
24. DIN EN ISO 643: Stahl – Mikrophotographische Bestimmung der erkennbaren Korngröße .
25. J. O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
26. J.A. Dantzig and M. Rappaz: Solidification, 2nd ed., EPFL Press, Lausanne, 2016.
27. C. Kammerer: Aluminium-Taschenbuch: Band 1: Grundlagen und Werkstoffe, 15th ed., Aluminium-Verlag, Düsseldorf, 1995.
28. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, 1998, vol. 66.10.4028/www.scientific.net/RC.35 ↗
29. M.H. Burden and J.D. Hunt: J. Cryst. Growth 1974, vol. 22, pp. 109–16.10.1016/0022-0248(74)90127-4 ↗
30. Y. J. Liang, X. Cheng, and H. M. Wang: Acta Mater., 2016, vol. 118, pp. 17–27.10.1016/j.actamat.2016.07.008 ↗
31. A. Kozlov and R. Schmid-Fetzer: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 27, p. 12001.10.1088/1757-899X/27/1/012001 ↗
32. Y. Du, Y. A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, Z. Yuan, Y. Liu, Y. He, and F. Y. Xie: Materials Science and Engineering A, 2003, vol. 363, pp. 140–51.10.1016/S0921-5093(03)00624-5 ↗
33. E. Fraś, K. Wiencek, M. Górny, H. F. López, and E. Olejnik: Metall and Mat Trans A, 2013, vol. 44, pp. 5788–95.10.1007/s11661-013-1919-0 ↗
34. S. Kou: Welding metallurgy, 2nd ed., Wiley-Interscience, Hoboken N.J., 2003.
35. D. Rosenthal: Welding Journal, 1941, vol. 20, pp. 220–34.
36. A. Gouffé: Rev. opt., 1945, vol. 24, pp. 1–7.
37. H. Hügel and T. Graf: Laser in der Fertigung, 3rd ed., Vieweg+Teubner, Wiesbaden, 2014.10.1007/978-3-8348-2240-6 ↗
38. S. Geng, P. Jiang, X. Shao, L. Guo, G. Mi, H. Wu, C. Wang, C. Han, and S. Gao: Applied Physics A: Materials Science and Processing, 2019, vol. 125, pp. 1–7.10.1007/s00339-019-2693-7 ↗