journal article·2020-03

Creep Performance Modeling of Modified 9Cr-1Mo Steels with Oxidation

X. J. Wu, X. Z. Zhang, R. Liu, M. X. Yao

Publisher page

Abstract

In this study, the deformation-mechanism-based true-stress (DMTS) creep model is modified to include oxidation influence on the long-term creep performance of modified 9Cr-1Mo steels. An area-deduction method is introduced to evaluate oxide scale formation on the creep coupons, which is incorporated into the DMTS model formulated based on intragranular dislocation glide (IDG), intragranular dislocation climb (IDC), and grain boundary sliding (GBS) mechanisms, in modifying the true stress. Thus, the modified DMTS model can not only describe the creep curve, but also predict the long-term creep life and failure mode, which is shown to be in good agreement with the creep data generated in the authors’ laboratory as well as by the National Institute for Materials Science (NIMS) of Japan for long-term (> 104 hours) creep life prediction on Grade 91 steels. In particular, the predictability of the model is demonstrated in comparison with the Larson–Miller parameter method. In addition, the modified DMTS model provides quantitative information of mechanism partitioning, insinuating the failure mode via intragranular/intergranular deformation. Therefore, it has advantages over the empirical models in providing physical insights of creep failure, which can be useful to material design for performance optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. E.N. DaC Andrade: Proc. R. Soc. A, 1910, vol. 90, pp.329-42.
2. 2.H. J. Frost and M. F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Elmsford, NY, 1982, pp. 1-19.
3. T.G. Langdon: Philos. Mag. Phil. Mag., 1970, vol. 22, pp. 689-700.10.1080/14786437008220939 ↗
4. 4.H. Lüthy, R.A. White, and O.D. Sherby: Mater. Sci. Eng., 1979, vol. 39, pp. 211–16.10.1016/0025-5416(79)90060-0 ↗
5. 5.X.J. Wu and A.K. Koul: Metall. Mater. Trans. A, 1995, vol. 26, pp. 905–14.10.1007/BF02649087 ↗
6. 6.F. Larson and J. Miller: Trans. ASME, 1952, vol. 74, p. 765.
7. 7.F. C. Monkman and N. J. Grant: ASTM Proceeding, 1956, vol. 56, pp. 593–620.
8. 8.B. Wilshire and P.J. Scharning: Mater. Sci. Technol., 2009, vol. 25, pp. 243-48.10.1179/174328408X361508 ↗
9. Allen and S. Garwood: Energy Materials-Strategic Research Agenda. Q2, Materials Energy Review, the Institute of Materials, Minerals and Mining, London, 2007.
10. K. Kimura and Y. Takahashi: Proc. ASME 2012 Press. Vessel. Pip. Conf., 2012, pp. 1–8.
11. 11.K. Kimura, M. Tabuchi, Y. Takahashi, K. Yoshida, and K. Yagi: Int. J. Microstruct. Mater. Prop., 2011, vol. 6, p. 72.
12. K. Kimura and M. Yaguchi: in Proc. ASME. Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, 2016, p. 9.
13. J. D. Parker: in Proc. Sustainable Industrial Processing Summit & Exhibition 2018, Vol. 6, 4–7 November 2018, Rio De Janeiro, Brazil.
14. 14.M.F. Ashby and B.F. Dyson: Fracture 84, 1984, pp. 3–30.10.1016/B978-1-4832-8440-8.50017-X ↗
15. 15.B.F. Dyson and S. Osgerby: Mater. Sci. Technol., 1987, vol. 3, pp. 545-53.10.1080/02670836.1987.11782266 ↗
16. 16.X.Z. Zhang, X.J. Wu, R. Liu, J. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2017, vol. 689, pp. 345–52.10.1016/j.msea.2017.02.044 ↗
17. 17.X. J. Wu, S. Williams, and D. Gong: J. Mater. Eng. Perform., 2012, vol. 21: pp. 2255-62.10.1007/s11665-012-0191-6 ↗
18. National Institute for Materials Science (Japan): Creep Data Sheet (CDS), No. 43A, 10 Oct 2016.
19. 19.M. Danielewski: Solid State Phenomena, 1992, vol. 21&22, pp.103-134.10.4028/www.scientific.net/SSP.21-22.103 ↗
20. 20.B.F. Dyson and T.B. Gibbons: Acta Metall., 1987, vol. 35, pp. 2355-69.10.1016/0001-6160(87)90083-6 ↗
21. 21.F. Abe: Metall. Mater. Trans. A., 2015, vol. 46, pp. 5610–25.10.1007/s11661-015-3144-5 ↗
22. 22.F. Abe: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 565–69.10.1016/j.msea.2004.01.057 ↗
23. F. Abe, M. Taneike, and K. Sawada: Int. J. Press. Vessel. Pip., 2007, vol. 84, pp. 3–12.10.1016/j.ijpvp.2006.09.003 ↗
24. 24.M. Yurechko, C. Schroer, O. Wedemeyer, A. Skrypnik, and J. Konys: Journal of Nuclear Materials, 2011, vol. 419, pp. 320–8.10.1016/j.jnucmat.2011.05.034 ↗
25. 25.P. Mathiazhagan and S. Khanna: High Temp. Mater. Proc., 2011, vol.1–2, pp. 43–50.
26. 27.X.Z. Zhang, X.J. Wu, R. Liu, and M.X. Yao: Mater. Sci. Eng. A, 2019, vol. 743, pp. 418-24.10.1016/j.msea.2018.11.097 ↗
27. 28.T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, and K.K. Rink: Mater. Sci. Eng. A, 2013, vol. 565, pp. 382–91.10.1016/j.msea.2012.12.031 ↗