Suppression of Void Nucleation in High-Purity Aluminum via Dynamic Recrystallization
Source abstract
Abstract
The process of ductile fracture in metals often begins with void nucleation at second-phase particles and inclusions. Previous studies of rupture in high-purity face-centered-cubic metals, primarily aluminum (Al), concluded that second-phase particles are necessary for cavitation. A recent study of tantalum (Ta), a body-centered-cubic metal, demonstrated that voids nucleate readily at deformation-induced dislocation boundaries. These same features form in Al during plastic deformation. This study investigates why void nucleation was not previously observed at dislocation boundaries in Al. We demonstrate that void nucleation is impeded in Al by room-temperature dynamic recrystallization (DRX), which erases these boundaries before voids can nucleate at them. If dislocation cells reform after DRX and before specimen separation by necking, voids nucleation is observed. These results indicate that dislocation substructures likely plays an important role in ductile rupture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. C. Zener, ASM, Cleveland 1948, vol. 3.
2. 2. Ao N Stroh, Advances in Physics 1957, vol. 6, pp. 418-465.10.1080/00018735700101406 ↗
3. A.H. Cottrell, Oxford: Clarendon Press 1953, p. 223.
4. A.H. Cottrell, ed., J. Fisher, W. Johnston, R. Thomson, T. Vreeland (Wiley, New York: 1957), p 509.
5. I. Cottrell, B.L. Averbach, O.K. Felbeck, G.T. Hahn, O.A. Thomas (OOs.), Fracture. MIT, Cambridge, pp. 20–45.
6. 6. C. F. Tipper, Metallurgia 1949, vol. 39, pp. 133-137.
7. 7. K. E. Puttick, Philosophical magazine 1959, vol. 4, pp. 964-969.10.1080/14786435908238272 ↗
8. E. Orowan, Reports on progress in physics 1949, vol. 12, p. 185–203.10.1088/0034-4885/12/1/309 ↗
9. D. R. Miller and F. M. C. Besag, In Proceedings 1st International Conference on Fracture, Sendai, 1965, Vol. II, Japan 1965, (1965).
10. Gilbert Y. Chin, W. F. Hosford and W. A. Backofen, Transactions of the Metallurgical Society of AIME 1964, vol. 230, p. 437–449.
11. C. J. Beevers and R. W. K. Honeycombe, In ICF0, Swampscott-MA (USA) 1959, (1959).
12. 12. C. J. Beevers and R. W. K. Honeycombe, Philosophical Magazine 1962, vol. 7, pp. 763-773.10.1080/14786436208212667 ↗
13. 13. A Ghahremaninezhad and K Ravi-Chandar, International Journal of Solids and Structures 2011, vol. 48, pp. 3299-3311.10.1016/j.ijsolstr.2011.07.001 ↗
14. 14. Anthony W Thompson and Paul F Weihrauch, Scripta Metallurgica 1976, vol. 10, pp. 205-210.10.1016/0036-9748(76)90150-2 ↗
15. 15. W. M. Garrison and N. R. Moody, Journal of Physics and Chemistry of Solids 1987, vol. 48, pp. 1035-1074.10.1016/0022-3697(87)90118-1 ↗
16. 16. Hiroyuki Toda, Hideyuki Oogo, Keitaro Horikawa, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Suzuki, Mitsuru Nakazawa, Yoshimitsu Aoki and Masakazu Kobayashi, Metall. Mater. Trans.A 2014, vol. 45, pp. 765-776.10.1007/s11661-013-2013-3 ↗
17. 17. Brad L. Boyce, Blythe G. Clark, Ping Lu, Jay D. Carroll and Christopher R. Weinberger, Metall. Mater. Trans.A 2013, vol. 44, pp. 4567-4580.10.1007/s11661-013-1814-8 ↗
18. 18. Philip Noell, Jay Carroll, Khalid Hattar, Blythe Clark and Brad Boyce, Acta Materialia 2017, vol. 137, pp. 103-114.10.1016/j.actamat.2017.07.004 ↗
19. 19. B. Bay, N. Hansen, D. A. Hughes and D. Kuhlmann-Wilsdorf, Acta metallurgica et materialia 1992, vol. 40, pp. 205-219.10.1016/0956-7151(92)90296-Q ↗
20. D. Kuhlmann-Wilsdorf and N. Hansen, Scripta Metall. Mater. 1991, vol. 25, pp. 1557–62.10.1016/0956-716X(91)90451-6 ↗
21. 21. Niels Hansen and Dorte Juul Jensen, Philos. Trans. R. Soc. Lond. A: Mathematical, Physical and Engineering Sciences 1999, vol. 357, pp. 1447-1469.10.1098/rsta.1999.0384 ↗
22. 22. Niels Hansen and Robert F. Mehl, Metall. Mater. Trans.A 2001, vol. 32, pp. 2917-2935.10.1007/s11661-001-0167-x ↗
23. Q Liu and N Hansen, Scripta Metallurgica et Materialia 1995, vol. 32.10.1016/0956-716X(94)00019-E ↗
24. 24. Doris Kuhlmann-Wilsdorf, Scripta materialia 1996, vol. 34, pp. 641-650.10.1016/1359-6462(95)00567-6 ↗
25. 25. Doris Kuhlmann-Wilsdorf, Progress in Materials Science 2009, vol. 54, pp. 707-739.10.1016/j.pmatsci.2009.03.007 ↗
26. 26. A Arsenlis and DM Parks, Acta materialia 1999, vol. 47, pp. 1597-1611.10.1016/S1359-6454(99)00020-8 ↗
27. 27. Philip J Noell, Jay D Carroll and Brad L Boyce, Acta Materialia 2018, vol. 161, pp. 83-98.10.1016/j.actamat.2018.09.006 ↗
28. R.W. Bauer and H.G. F. Wilsdorf, In Proceedings of an international conference on Dynamic Crack Propagation, (1973), pp 197–213.10.1007/978-94-010-9253-1_13 ↗
29. 29. R. N. Gardner, T. C. Pollock and H. G. F. Wilsdorf, Mater. Sci. Eng. 1977, vol. 29, pp. 169-174.10.1016/0025-5416(77)90123-9 ↗
30. 30. R. N. Gardner and H. G. F. Wilsdorf, Metallurgical Transactions A 1980, vol. 11, pp. 653-658.10.1007/BF02670703 ↗
31. 31. R. N. Gardner and H. G. F. Wilsdorf, Metallurgical Transactions A 1980, vol. 11, pp. 659-669.10.1007/BF02670704 ↗
32. 32. H. G. F. Wilsdorf, Acta Metallurgica 1982, vol. 30, pp. 1247-1258.10.1016/0001-6160(82)90021-9 ↗
33. 33. T. C. Pollock and H. G. F. Wilsdorf, Mater. Sci. Eng. 1983, vol. 61, pp. 7-15.10.1016/0025-5416(83)90120-9 ↗
34. 34. H. G. F. Wilsdorf, Mater. Sci. Eng. 1983, vol. 59, pp. 1-39.10.1016/0025-5416(83)90085-X ↗
35. F Montheillet and J Le Coze, Phys. Status Solidi 2002, vol. 189, pp. 51–58.10.1002/1521-396X(200201)189:1<51::AID-PSSA51>3.0.CO;2-M ↗
36. 36. W Skrotzki, N Scheerbaum, C-G Oertel, H-G Brokmeier, S Suwas and LS Toth, Acta Materialia 2007, vol. 55, pp. 2211-2218.10.1016/j.actamat.2006.08.018 ↗
37. D Ponge, M Bredehöft and G Gottstein, Scripta Mater.1997, vol. 37.1769–7510.1016/S1359-6462(97)00346-1 ↗
38. YS Choi, KI Kim, KH Oh, HN Han, SH Kang, J Jang and JH Han, Journal of Materials Research 2013, vol. 28, pp. 2829-283410.1557/jmr.2013.265 ↗
39. 39. H Yamagata, Acta metallurgica et materialia 1995, vol. 43, pp. 723-729.10.1016/0956-7151(94)00267-L ↗
40. ASTM International, Standard designation E3061-17. ASTM International, West Conshohocken, PA.
41. ASTM International, (ASTM International: 2013).
42. West Conshohocken (USA): ASTM, 2004.
43. 43. R Brandt and G Neuer, International Journal of Thermophysics 2007, vol. 28, pp. 1429-1446.10.1007/s10765-006-0144-0 ↗
44. 44. Jay D Carroll, Wael Abuzaid, John Lambros and Huseyin Sehitoglu, International Journal of Fatigue 2013, vol. 57, pp. 140-150.10.1016/j.ijfatigue.2012.06.010 ↗
45. Oxford Instruments PLC HKL Channel 5, Oxon, UK.
46. F. Bachmann, R Hielscher and H Schaeben. Solid state phenomena. Trans Tech, Zurich (2010), pp 63-68.
47. LN Brewer, DP Field and CC Merriman, Electron backscatter diffraction in materials science. Springer, Berlin (2009), pp 251-262.10.1007/978-0-387-88136-2_18 ↗
48. 48. JF Nye, Acta metallurgica 1953, vol. 1, pp. 153-162.10.1016/0001-6160(53)90054-6 ↗
49. 49. Wolfgang Pantleon, Scripta Materialia 2008, vol. 58, pp. 994-997.10.1016/j.scriptamat.2008.01.050 ↗
50. 50. FJ Humphreys, Scripta materialia 2004, vol. 51, pp. 771-776.10.1016/j.scriptamat.2004.05.016 ↗
51. MH Alvi, SW Cheong, H Weiland and AD Rollett, Materials science forum. Trans Tech, Zurich (2004), pp 357-362.
52. SW Cheong and H Weiland, In: Materials science forum. Trans Tech, Zurich (2007), pp 153-158.
53. S Mandal, SK Mishra, A Kumar, I Samajdar, PV Sivaprasad, T Jayakumar and B Raj, Philosophical Magazine 2008, vol. 88, pp. 883-89710.1080/14786430801989799 ↗
54. 54. H Mirzadeh, JM Cabrera, A Najafizadeh and PR Calvillo, Mater. Sci. Eng.: A 2012, vol. 538, pp. 236-245.10.1016/j.msea.2012.01.037 ↗
55. SI Wright, MM Nowell and DP Field, Microscopy and Microanalysis 2011, vol. 17, pp. 316-329.10.1017/S1431927611000055 ↗
56. 56. SF Wong, Peter D Hodgson and PF Thomson, Materials science and technology 1999, vol. 15, pp. 689-696.10.1179/026708399101506283 ↗
57. 57. F Haessner and J Schmidt, Scripta metallurgica 1988, vol. 22, pp. 1917-1922.10.1016/S0036-9748(88)80238-2 ↗
58. 58. J Weertman, Journal of applied physics 1986, vol. 60, pp. 1877-1887.10.1063/1.337236 ↗
59. 59. K. Jagannadham and H. G. F. Wilsdorf, Mater. Sci. Eng. 1986, vol. 81, pp. 273-292.10.1016/0025-5416(86)90268-5 ↗
60. 60. K Huang and RE Logé, Materials & Design 2016, vol. 111, pp. 548-574.10.1016/j.matdes.2016.09.012 ↗
61. P. W. Bridgman: Studies in large plastic flow and fracture. McGraw-Hill, New York, (1952).
62. 62. AV Sergueeva, J Zhou, BE Meacham and DJ Branagan, Mater. Sci. Eng.: A 2009, vol. 526, pp. 79-83.10.1016/j.msea.2009.07.046 ↗
63. P Matic, GC Kirby and M I Jolles, Proc. R. Soc. Lond. 1988, vol. 417, pp. 309-333.
64. 64. J. P. Hirth and W. D. Nix, Acta metallurgica 1985, vol. 33, pp. 359-368.10.1016/0001-6160(85)90078-1 ↗
65. 65. P. B. Hirsch, J. Silcox, R. E. Smallman and K. H. Westmacott, Philosophical Magazine 1958, vol. 3, pp. 897-908.10.1080/14786435808237028 ↗
66. 66. Michio Kiritani, Journal of the Physical Society of Japan 1964, vol. 19, pp. 618-631.10.1143/JPSJ.19.618 ↗
67. 67. Yoshiharu Shimomura and Sho Yoshida, Journal of the Physical Society of Japan 1967, vol. 22, pp. 319-331.10.1143/JPSJ.22.319 ↗
68. 68. Yoshiharu Shimomura and Yoshijiro Moritaki, Japanese Journal of Applied Physics 1981, vol. 20, p. 1787–1790.10.1143/JJAP.20.1787 ↗
69. H. Riedel: Fracture at high temperatures. Springer, Berlin (1987)10.1007/978-3-642-82961-1 ↗
70. J. R. Rice and D. M. Tracey, Journal of the Mechanics and Physics of Solids 1969, vol. 17, pp. 201-217.10.1016/0022-5096(69)90033-7 ↗