journal article·2019-06-15

Effect of Solid Solution Elements on Solubility Products of Carbides and Nitrides in Ferrite: Thermodynamic Calculations

Xuan-Wei Lei, Da-Yong Li, Xue-Hui Zhang, Tong-Xiang Liang

Publisher page

Abstract

Thermodynamic calculation based on the two sublattice model are used to evaluate solubility products of titanium, niobium, vanadium carbide, and nitride in ferrite under the effect of solid solution alloy elements Mn and Ni, respectively. The results show that the calculated solubility products of these binary compounds in pure ferrite are closer to the solubility products by experimental measurements than the solubility products by thermodynamic calculations in previous studies. The solubility products in ferrite, on the condition that the total solid solution alloy content is relatively small, are given as follows: $$ log alpha K_{ ext{TiC}} = 5.08 - frac{11,048}{T} + 0.04left[ { ext{wt pct Mn}} ight] + frac{62}{T}left[ { ext{wt pct Ni}} ight] $$ $$ log alpha K_{ ext{NbC}} = 5.72 - frac{12,249}{T} + 0.06left[ { ext{wt pct Mn}} ight] + frac{44}{T}left[ { ext{wt pct Ni}} ight] $$ $$ log alpha K_{ ext{VC}} , = ,6.02, - ,frac{9563}{T} + left( { - ,0.04 + frac{79}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( { - ,0.03 + frac{80}{T}} ight)left[ { ext{wt pct Ni}} ight] $$ $$ log alpha K_{ ext{TiN}} = 5.41 - frac{16,997}{T} + 0.03left[ { ext{wt pct Mn}} ight] + frac{32}{T}left[ { ext{wt pct Ni}} ight] $$ $$ log alpha K_{ ext{NbN}} = 5.51 - frac{12,799}{T} + 0.05left[ { ext{wt pct Mn}} ight] + frac{13}{T}left[ { ext{wt pct Ni}} ight] $$ $$ log alpha K_{ ext{VN}} = 4.94, - ,frac{10,615}{T} + left( { - ,0.05 + frac{85}{T}} ight)left[ { ext{wt pct Mn}} ight], + ,left( { - ,0.03 + frac{49}{T}} ight)left[ { ext{wt pct Ni}} ight] $$
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Ö.E. Atasoy: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 379–84.10.1007/BF02644215 ↗
2. K. Poorhaydari and D.G. Ivey: Can. Metall. Q., 2009, vol. 48, pp. 115–22.10.1179/cmq.2009.48.2.115 ↗
3. F. Perrard, F. Bley, P. Donnadieu, P. Maugis, and A. Deschamps: J Appl. Crystallogr., 2006, vol. 39, pp. 473–82.10.1107/S002188980601301X ↗
4. J. Chen, M. Lv, S. Tang, Z. Liu, and G. Wang: Mater. Sci. Eng. A, 2014, vol. 594, pp. 389–93.10.1016/j.msea.2013.09.086 ↗
5. G. Inden: Proc. CALPHAD V Project Meeting, Planck Institute for Metal Research, Dusseldorf, 1976, pp. 1–13.
6. M. Hillert and M. Jarl: Calphad, 1978, vol. 2, pp. 227–38.10.1016/0364-5916(78)90011-1 ↗
7. K. Inoue, N. Ishikawa, I. Ohnuma, H. Ohtani, and K. Ishida: ISIJ Int., 2001, vol. 41, pp. 175–82.10.2355/isijinternational.41.175 ↗
8. V.V. Popov and I.I. Gorbachev: Fiz. Metall. Metalloved., 2005, vol. 99, pp. 69–82.
9. V.V. Popov and I.I. Gorbachev: Fiz. Metall. Metalloved., 2004, vol. 98, pp. 11–21.
10. C. Guo, C. Li, X. Zheng, and Z. Du: Calphad, 2012, vol. 38, pp. 155–60.10.1016/j.calphad.2012.06.010 ↗
11. K. Frisk: Calphad, 2008, vol. 32, pp. 326–37.10.1016/j.calphad.2007.11.007 ↗
12. S. Liu, B. Hallstedt, D. Music, and Y. Du: Calphad, 2012, vol. 38, pp. 43–58.10.1016/j.calphad.2012.03.004 ↗
13. J. Chipman: Metall. Trans., 1972, vol. 3, pp. 55–64.10.1007/BF02680585 ↗
14. H.A. Wriedt, N.A. Gokcen, and R.H. Nafziger: Bull. Alloy Phase Diagrams, 1987, vol. 8, pp. 355–77.10.1007/BF02869273 ↗
15. H. Czichos, T. Saito, and L.E. Smith: Springer Handbook of Metrology and Testing, Springer Science & Business Media, New York, NY, 2011.10.1007/978-3-642-16641-9 ↗
16. U.D. Veryatin, V.P. Mashirev, N.G. Ryabtsev, V.I. Tarasov, B.D. Rogozkin, and I.V. Korobov: Thermodynamic Properties of Inorganic Substances, Atomizdat, Moscow, 1965.
17. M. Binnewies and E. Milke: Thermochemical Data of Elements and Compounds, Wiley-VCH, Weinheim, 1999.
18. A. Dinsdale: Calphad, 1991, vol. 15 (4), pp. 317–25.10.1016/0364-5916(91)90030-N ↗
19. I.I. Gorbachev and V.V. Popov: Phys. Met. Metallogr., 2010, vol. 110, pp. 52–61.10.1134/S0031918X10070070 ↗
20. I.I. Gorbachev and V.V. Popov: Phys. Met. Metallogr., 2009, vol. 108, pp. 484–95.10.1134/S0031918X09110088 ↗
21. J. Ågren: Metall. Trans. A, 1979, vol. 10A, pp. 1847–52.10.1007/BF02811728 ↗
22. C. Qiu: Metall. Trans. A, 1993, vol. 24A, pp. 629–45.10.1007/BF02656632 ↗
23. M. Hillert and C. Qiu: Metall. Trans. A, 1991, vol. 22A, pp. 2187–98.10.1007/BF02664985 ↗
24. W. Huang: Metall. Trans. A, 1990, vol. 21A, pp. 2115–23.10.1007/BF02647870 ↗
25. S. Atamert and J.E. King: Acta Metall. Mater., 1991, vol. 39, pp. 273–85.10.1016/0956-7151(91)90306-L ↗
26. K.A. Taylor: Scripta Metall. Mater., 1995, vol. 32, pp. 7–12.10.1016/S0956-716X(99)80002-8 ↗
27. L.F. Dumitrescu and M. Hillert: ISIJ Int., 1999, vol. 39, pp. 84–90.10.2355/isijinternational.39.84 ↗
28. S. Akamatsu, M. Hasebe, T. Senuma, Y. Matsumura, and O. Kisue: ISIJ Int., 1994, vol. 34, pp. 9–16.10.2355/isijinternational.34.9 ↗
29. R.C. Hudd, A. Jones, and M.N. Kale: J. Iron Steel Inst., 1971, vol. 209, pp. 121–25.
30. A. Pichler, M. Mayr, G. Hribernig, H. Presslinger, and P. Stiaszny: Int. Conf. on Physical Metallurgy of IF Steels, Tokyo, 1994, pp. 249–68.
31. J.A. Todd and P. Li: Metall. Trans. A, 1986, vol. 17A, pp. 1191–02.10.1007/BF02665318 ↗
32. S. Koyama, T. Ishii, and K. Narita: J. Jpn. Inst. Met., 1973, vol. 37, pp. 191–96.10.2320/jinstmet1952.37.2_191 ↗
33. J. Kunze: Steel Res., 1991, vol. 62, pp. 430–32.10.1002/srin.199100423 ↗
34. K. Inoue, I. Ohnuma, H. Ohtani, K. Ishida, and T. Nishizawa: ISIJ Int., 1998, vol. 38, pp. 991–97.10.2355/isijinternational.38.991 ↗
35. Q.L. Yong: The Second Phase in Steels, Metallurgical Industry Press, Beijing, 2006, p. 37.
36. H. Ohtani and M. Hillert: Calphad, 1991, vol. 15, pp. 25–39.10.1016/0364-5916(91)90023-D ↗
37. R.W. Fountain and J. Chipman: Trans. TMS-AIME, 1958, vol. 212, pp. 737–48.
38. W. Huang: Metall. Trans. A, 1991, vol. 22A, pp. 1911–20.10.1007/BF02669859 ↗
39. K. Balasubramanian, A. Kroupa, and J.S. Kirkaldy: Metall. Trans. A, 1992, vol. 23A, pp. 709–27.10.1007/BF02675550 ↗
40. J.H. Shim, C.S. Oh, and D.N. Lee: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 955–66.10.1007/s11663-996-0009-8 ↗
41. M. Grujicic, L. Kaufman, and W.S. Owen: Calphad, 1986, vol. 10, pp. 37–47.10.1016/0364-5916(86)90008-8 ↗
42. K. Balasubramanian, A. Kroupa, and J.S. Kirkaldy: Metall. Trans. A, 1992, vol. 23A, pp. 729–44.10.1007/BF02675551 ↗