journal article·2019-02-15

Effect of Mn and C on Grain Growth in Mn Steels

Madhumanti Bhattacharyya, Brian Langelier, Gary R. Purdy, Hatem S. Zurob

Publisher page

Abstract

Grain growth in Fe-Mn austenites was examined at 1373 K and 1473 K as a function of Mn (0 to 30 wt pct) and carbon (0 to 0.5 wt pct) content. The addition of Mn had the effect of reducing the rate of grain growth. The observed inhibiting effect of Mn is believed to be mainly due to an increase in the occurrence of annealing twins with increasing Mn content. It is hypothesized that, upon intersecting with High-Angle Grain Boundaries (HAGBs), the twins result in low-energy, low-mobility boundary segments which ultimately slow the overall growth kinetics. Solute drag does not appear to significantly contribute to the slowing of the grain growth kinetics for Mn contents greater than 6 wt pct. Atom probe tomography studies confirmed weak or negligible segregation of Mn to HAGBs. The carbon content had a small but measurable effect on the grain growth kinetics. Reduction of the carbon content in an Fe-30 wt pct Mn alloy resulted in a decrease in effective grain boundary mobility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. F.J.Humphreys, M.Hatherly:RECRYSTALLIZATION and Related Annealing Phenomena, Elsevier, Oxford, 2004.
2. M. Winning, A. D. Rollett, G. Gottstein, D. J. Srolovitz, A. Lim: Philos. Mag., 2010, vol. 90, pp. 3107-28.10.1080/14786435.2010.481272 ↗
3. Y. Huang, F. J. Humphreys: Acta Materialia., 1999, vol. 47, pp. 2259-68.10.1016/S1359-6454(99)00062-2 ↗
4. Y. Huang, F. J. Humphreys: Acta Materialia., 2000, vol. 48, pp. 2017-30.10.1016/S1359-6454(99)00418-8 ↗
5. A.Karma, Z. T. Trautt and Y. Mishin: Physical Review Letters, vol. 109, 095501 (2012) .10.1103/PhysRevLett.109.095501 ↗
6. D.L. Olmsted, E.A. Holm and S.M. Foiles: Acta Materialia., 2009, vol. 57, pp. 3694-03.10.1016/j.actamat.2009.04.007 ↗
7. M Upmanyu, DJ Srolovitz, LS Shvindlerman, G Gottstein (1999) Acta Mater. 47:3901-14.10.1016/S1359-6454(99)00240-2 ↗
8. J.W. Cahn and J.E. Taylor: Acta Materialia., 2004, vol. 52, pp. 4887-98.10.1016/j.actamat.2004.02.048 ↗
9. R. A. Vandermeer, D. Juul. Jensen and E. Woldt: Metall Mater Trans A., 1997, vol. 28, pp. 749-54.10.1007/s11661-997-0061-2 ↗
10. K. Lücke, K. Detert: Acta Metall., 1957, vol. 5, pp. 628-37.10.1016/0001-6160(57)90109-8 ↗
11. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
12. M. Hillert, B.O. Sundman: Acta Metall., 1976, vol. 24, pp. 731-43.10.1016/0001-6160(76)90108-5 ↗
13. D. Drabble, University of Canterbury, Mechanical Engineering, PhD Thesis, 2010.
14. D. Brandon: Acta Metall., 1966, vol. 14, pp. 1479-84.10.1016/0001-6160(66)90168-4 ↗
15. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, B. Gorman: Ultramicroscopy., 2007, vol. 107, pp. 131-39.10.1016/j.ultramic.2006.06.008 ↗
16. P.J. Felfer,T. Alam, S.P. Ringer, J.M. Cairney: Microsc Res Tech., 2012, vol. 75, pp. 484-91.10.1002/jemt.21081 ↗
17. B . Gault, M.P. Moody, J.M. Cairney, S.P. Ringer: Atom Probe Microscopy, Springer Science & Business Media, New York, 2012, pp. 71-110.10.1007/978-1-4614-3436-8_4 ↗
18. M. Militzer,T. Garcin, W.J. Poole: Mater Sci Forum., 2013, vol. 753, pp. 25-30.10.4028/www.scientific.net/MSF.753.25 ↗
19. M. Bhattacharyya, McMaster University, Materials Science and Engineering, PhD Thesis, 2018.
20. A. Ferraiuolo, A. Smith, J.G. Sevillano, F. de las Cuevas, G. Pratolongo, H. Gouveia, M. Mendes. Rodrigues and P. Karjalainen: Contract RFSRCT-00030, Res Program Res Fund Coal Steel, Eur Union. 2009.
21. K. Furumai, H. Zurob, A. Phillion: ISIJ Int (Under Rev. 2018).
22. M.K. Rehman, H.S.Zurob: Metall Mater Trans A.,2013, vol. 44, pp. 1862-71.10.1007/s11661-012-1526-5 ↗
23. M . Herbig, M. Kuzmina, C. Haase, R.K.W. Marceau, I. Gutierrez-urrutia, D. Haley: Acta Mater., 2015, vol. 83, pp. 37-47.10.1016/j.actamat.2014.09.041 ↗
24. M. Kuzmina, D. Ponge, D. Raabe:Acta Mater., 2015, vol. 86, pp. 182-92.10.1016/j.actamat.2014.12.021 ↗
25. K.H. Kwon, Y. Ha, K. Hono, N.J. Kim: Scr Mater., 2013, vol. 69, pp. 420-23.10.1016/j.scriptamat.2013.05.042 ↗
26. F. Nikbakht, M. Nasim, C. Davies, E.A Wilson, H. Adrian: Mater Sci Technol., 2010, vol. 26, pp. 552-558.10.1179/174328409X405616 ↗
27. N.H. Heo, J.W. Nam, Y. Heo, S. Kim: Acta Mater., 2013, vol. 61, pp. 4022-4034.10.1016/j.actamat.2013.03.016 ↗
28. J. Nakano, P.J. Jacques:CALPHAD Comput Coupling Phase Diagrams and Thermochem., 2010, vol. 34, pp. 167-75.10.1016/j.calphad.2010.02.001 ↗
29. M. Ghasri Khouzani, McMaster University, Materials Science and Engineering, PhD Thesis, 2015.
30. Y. Lee, C. Choi: Metall Mater Trans A., 2000, vol. 31A, pp. 355-60.10.1007/s11661-000-0271-3 ↗
31. A. Saeed-Akbari, J. Imlau, U. Prahl, W. Bleck: Metall Mater Trans A., 2009, vol. 40, pp. 3076-90.10.1007/s11661-009-0050-8 ↗
32. W. Charnock, J. Nutting: Met Sci J., 1967, vol. 1, pp. 123-127.10.1179/msc.1967.1.1.123 ↗
33. G. Miyamoto, N. Iwata, N. Takayama and T. Furuhara: Acta Materialia., 2010, vol. 58, pp. 6393-03.10.1016/j.actamat.2010.08.001 ↗
34. T.H. Chuang, C.H. Tsai, H.C. Wang, C.C. Chang, C.H.Chuang, J.D.Lee and H.H.Tsai: J Electron Mater., 2012, vol. 41, pp. 3215-22.10.1007/s11664-012-2225-0 ↗