journal article·2018-11

A Comparison of the Inertia Friction Welding Behavior of Similar and Dissimilar Ni-Based Superalloys

O. N. Senkov, D. W. Mahaffey, S. L. Semiatin

Publisher page

Abstract

The inertia friction welding behavior of similar (LSHR to LSHR or Mar-M247 to Mar-M247) and dissimilar (LSHR to Mar-M247) alloy pairs was determined. The relationships between the IFW process parameters and welding response, such as the kinetics and efficiency of the transformation of the mechanical energy of the flywheel into heat of joining samples, weld duration, kinetics of flash formation, and bond quality were identified. Conditions resulting in sound welding were determined. It was found that the mechanistic behavior of each of the alloys during dissimilar welding can be approximated by the behavior of the respective alloy during similar welding. By contrast, the microstructure, microhardness and the thickness of the heat affected zone depended on the type of the alloy pair used during IFW.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. F.J. Wallace, D.E. Spindler, and J.P. Thome: in Metals Handbook: Vol. 6: Welding, Brazing and Soldering, American Society for Metals, 1989.
2. M.M. Attallah, and M. Preuss: in Welding and Joining of Aerospace Materials, M.C. Chaturvedi, ed., Woodhead Publishing: Oxford, 2012.
3. A. Chamanfar, M. Jahazi and J. Cormier: Metall. Mater. Trans. A 2015, vol. 46, pp. 1639-1669.10.1007/s11661-015-2752-4 ↗
4. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin and C. Woodward: Metall. Mater. Trans A 2014, vol. 45, pp. 5545-5561.10.1007/s11661-014-2512-x ↗
5. O. N. Senkov, D. W. Mahaffey, S. L. Semiatin and C. Woodward: J. Mater. Eng. Perform. 2015, vol. 24, pp. 1173-1184.10.1007/s11665-014-1379-8 ↗
6. Jian Luo, Longfei Li, Yaling Dong and Xiaoling Xu: International Journal of Advanced Manufacturing Technology 2014, vol. 70, pp. 1673-1681.10.1007/s00170-013-5441-8 ↗
7. O.N. Senkov, D. W. Mahaffey and S. L. Semiatin: Metall. Mater. Trans. A 2016, vol. 47A, pp. 6121-6137.10.1007/s11661-016-3784-0 ↗
8. D. W. Mahaffey, O. N. Senkov, R. Shivpuri and S. L. Semiatin: Metall. Mater. Trans. A 2016, vol. 47, pp. 3981-4000.10.1007/s11661-016-3600-x ↗
9. Z.W. Huang, H.Y. Li, M. Preuss, M. Karadge, P. Bowen, S. Bray, and G. Baxter: Metall. Mater. Trans. A, vol. 38A, pp. 1608–20, 2007.10.1007/s11661-007-9194-6 ↗
10. M. Preuss, P. J. Withers and G. J. Baxter: Mater. Sci. Eng. A 2006, vol. 437, pp. 38-45.10.1016/j.msea.2006.04.058 ↗
11. F. Daus, H. Y. Li, G. Baxter, S. Bray and P. Bowen: Materials Science and Technology 2007, vol. 23, pp. 1424-1432.10.1179/174328407X243997 ↗
12. Z. W. Huang, H. Y. Li, G. Baxter, S. Bray and P. Bowen: Journal of Materials Processing Technology 2011, vol. 211, pp. 1927-1936.10.1016/j.jmatprotec.2011.06.019 ↗
13. Z. W. Huang, H. Y. Li, G. Baxter, S. Bray and P. Bowen: Advanced Materials Research 2011, vol. 278, pp. 440-5.10.4028/www.scientific.net/AMR.278.440 ↗
14. O.N. Senkov, D.W. Mahaffey, D.J. Tung, W. Zhang and S.L. Semiatin: Metall. Mater. Trans A 2017, vol. 48, pp. 3328-3342.10.1007/s11661-017-4115-9 ↗
15. O.N. Senkov, D.W. Mahaffey and S.L. Semiatin: J. Mater. Process. Technol. 2017, vol. 250, pp. 156-168.10.1016/j.jmatprotec.2017.07.020 ↗
16. S.L. Semiatin, K.E. MacClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang and T.P. Cabb: Metall. Mater. Trans. A 2013, vol. 44, pp. 2778-2798.10.1007/s11661-013-1675-1 ↗
17. M. Kaufman: in Fifth International Symposium on Superalloys, TMS, Warrendale, PA, 1984, pp 43–52.10.7449/1984/Superalloys_1984_43_52 ↗
18. S.L. Semiatin, D.W. Mahaffey, D.J. Tung, W. Zhang and O.N. Senkov: Metall. Mater. Trans A 2017, vol. 48A, pp. 1864-1879.10.1007/s11661-016-3907-7 ↗