Martensite Transformation During Continuous Cooling: Analysis of Dilatation Data
Source abstract
Abstract
The amount of athermal martensite as a function of undercooling below the martensite start temperature was quantified by analyzing the dilatation data using a novel method, and the results are compared with existing empirical equations. The discrepancy between the two results was attributed to the difference in the concentration ranges of the alloying elements considered. The importance of including the effect of substitutional elements on the lattice parameters of martensite for accurate quantitative interpretation of dilatation data was highlighted. Equations that include the effect of substitutional alloying elements were proposed to calculate martensite lattice parameters. It is further shown that it is possible to calculate the lattice parameter coefficient of a substitutional alloying element directly from the dilatation curve. It was used to estimate, for the first time, the lattice parameter coefficient of aluminum (Al) in ferrite/martensite from the dilatation curves of the two alloy steels studied in the current work. To corroborate the value of the lattice parameter coefficient of Al estimated from the dilatation data, the Bain model was also used to calculate the lattice parameter coefficient of Al independently and a good match was obtained. The lattice parameter coefficient value of Al in ferrite/martensite calculated by both these methods follows the overall trend shown by other substitutional alloying elements. The equations proposed for the lattice parameters of martensite were validated by Rietveld analysis of the X-ray diffraction (XRD) patterns.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
2. S.M.C. van Bohemen and J. Sietsma: Mater. Sci. Technol., 2009, vol. 25, pp. 1009–12.10.1179/174328408X365838 ↗
3. S.M.C. van Bohemen: Mater. Sci. Technol., 2012, vol. 28, pp. 487–95.10.1179/1743284711Y.0000000097 ↗
4. S.-J. Lee and C.J.V. Tyne: Metall. Mater. Trans. A, 2012, vol. 43, pp. 422–27.10.1007/s11661-011-0872-z ↗
5. V. Raghavan and A.R. Entwisle: Special Report 93, The Iron and Steel Institute, 1965, pp 30–37.
6. R. Ranjan, H. Beladi, S.B. Singh, and P.D. Hodgson: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3232–47.10.1007/s11661-015-2885-5 ↗
7. R. Ranjan, T. Bhattacharyya, and S.B. Singh: in Advanced High Strength Steel: Processing and Applications, T.K. Roy, B. Bhattacharya, C. Ghosh, and S.K. Ajmani, eds., Springer Singapore, Singapore, 2018, pp. 27–38.
8. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
9. J.G. Speer, A.M. Streicher, D.K. Matlock, F. Rizzo, and G. Krauss: in Austenite Formation and Decomposition, E.B. Damm and M. Merwin, eds., ISS/TMS, Warrendale, PA, 2003, pp. 505–22.
10. D.K. Matlock, V.E. Bräutigam, and J.G. Speer: Mater. Sci. Forum, 2003, vol. 426, pp. 1089–94.10.4028/www.scientific.net/MSF.426-432.1089 ↗
11. E.J. Seo, L. Cho, Y. Estrin, and B.C.D. Cooman: Acta Mater., 2016, vol. 113, pp. 124–39.10.1016/j.actamat.2016.04.048 ↗
12. J.G. Speer, E.D. Moor, and A.J. Clarke: Mater. Sci. Technol., 2015, vol. 31, pp. 3–9.10.1179/1743284714Y.0000000628 ↗
13. H.K.D.H. Bhadeshia: Proc. Royal Society of London A: Mathematical, Physical and Engineering Sciences, The Royal Society, London, 2010, pp. 3–18.10.1098/rspa.2009.0407 ↗
14. C. Garcia-Mateo and F.G. Caballero: Int. J. Mater. Res., 2007, vol. 98, pp. 137–43.10.3139/146.101440 ↗
15. F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, and P. Brown: Mater. Sci. Technol., 2002, vol. 18, pp. 279–84.10.1179/026708301225000725 ↗
16. C. García-Mateo and F.G. Caballero: ISIJ Int., 2005, vol. 45, pp. 1736–40.10.2355/isijinternational.45.1736 ↗
17. T. Yokota, C.G. Mateo, and H.K.D.H. Bhadeshia: Scripta Mater., 2004, vol. 51, pp. 767–70.10.1016/j.scriptamat.2004.06.006 ↗
18. X.Y. Long, F.C. Zhang, J. Kang, B. Lv, and X.B. Shi: Mater. Sci. Eng., A, 2014, vol. 594, pp. 344–51.10.1016/j.msea.2013.11.089 ↗
19. P. Jacques, F. Delannay, X. Cornet, P. Harlet, and J. Ladriere: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
20. T.D. Cock, J.P. Ferrer, C. Capdevila, F.G. Caballero, V. López, and C.G. de Andrés: Scripta Mater., 2006, vol. 55, pp. 441–43.10.1016/j.scriptamat.2006.05.027 ↗
21. M.D. Meyer, D. Vanderschueren, and B.C.D. Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
22. S. Hashimoto, S. Ikeda, K.-I. Sugimoto, and S. Miyake: ISIJ Int., 2004, vol. 44, pp. 1590–98.10.2355/isijinternational.44.1590 ↗
23. M. Mukherjee, S.B. Singh, and O.N. Mohanty: Mater. Sci. Eng., A, 2008, vol. 486, pp. 32–37.10.1016/j.msea.2007.08.033 ↗
24. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
25. T. Bhattacharyya, S.B. Singh, S. Das, A. Haldar, and D. Bhattacharjee: Mater. Sci. Eng., A, 2011, vol. 528, pp. 2394–2400.10.1016/j.msea.2010.11.054 ↗
26. S. Samanta, S. Das, D. Chakrabarti, I. Samajdar, S.B. Singh, and A. Haldar: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5653–64.10.1007/s11661-013-1929-y ↗
27. R. Ranjan and S.B. Singh: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 88–93.10.1007/s11661-017-4419-9 ↗
28. K. Gunabalapandian, S. Samanta, R. Ranjan, and S.B. Singh: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2099–2104.10.1007/s11661-017-4014-0 ↗
29. W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 5–26.10.1007/BF02680580 ↗
30. S.-J. Lee and Y.-K. Lee: Scripta Mater., 2005, vol. 52, pp. 973–76.10.1016/j.scriptamat.2005.01.028 ↗
31. W.B. Pearson: A Handbook of Lattice Spacings and Structures of Metals and Alloys, Pergamon Press, Oxford, United Kingdom, 1964.
32. F.E. Bowman, R.M. Parke, and A.J. Herzig: Trans. Am. Soc. Met., 1943, vol. 31, p. 487.
33. A.P. Guljaev and E.F. Trusova: Ž. Tekh. Fiz. SSSR, 1950, vol. 20, p. 66.
34. J.T. Norton: Trans. AIMME, 1935, vol. 116, p. 386.
35. W.C. Ellis and E.S. Greiner: Trans. Am. Soc. Met., 1941, vol. 29, p. 415.
36. H. Martens and P. Duwez: Trans. Am. Soc. Met., 1952, vol. 44, p. 484.
37. A.L. Sutton and W. Hume-Rothery: Phil. Mag., 1955, vol. 46, p. 1295.10.1080/14786441208521140 ↗
38. D.D. Van Horn: Doctorate Thesis in Physics, Case Institute of Technology, Cleveland, OH, 1949.
39. C.S. Smith: J. Appl. Phys., 1941, vol. 12, p. 817.10.1063/1.1712872 ↗
40. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
41. L. Cheng, A. Böttger, T.H. de Keijser, and E.J. Mittemeijer: Scripta Metall. Mater., 1990, vol. 24, pp. 509–14.10.1016/0956-716X(90)90192-J ↗
42. Y. Lu, H. Yu, and R.D. Sisson: Mater. Sci. Eng., A, 2017, vol. 700, pp. 592–97.10.1016/j.msea.2017.05.094 ↗
43. T.A. Kop, J. Sietsma, and S. Van Der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519–26.10.1023/A:1004805402404 ↗
44. M. Gómez, S.F. Medina, and G. Caruana: ISIJ Int., 2003, vol. 43, pp. 1228–37.10.2355/isijinternational.43.1228 ↗
45. E. Clementi, D.L. Raimondi, and W.P. Reinhardt: J. Chem. Phys., 1967, vol. 47, pp. 1300–07.10.1063/1.1712084 ↗
46. H.K.D.H. Bhadeshia: Martensite in Steels, 2009, https://www.phase-trans.msm.cam.ac.uk/2000/C9/lectures45.pdf.
47. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels: Microstructure and Properties, Butterworth-Heinemann, Elsevier, Oxford, United Kingdom, 2006.
48. E.C. Bain and N.Y. Dunkirk: Trans. TMS-AIME, 1924, vol. 79, p. 25.
49. A.L. Roitburd and G.V. Kurdjumov: Mater. Sci. Eng., 1979, vol. 39, pp. 141–67.10.1016/0025-5416(79)90055-7 ↗
50. E.V. Pereloma: Mater. Sci. Technol., 2016, vol. 32, pp. 99–103.10.1179/1743284715Y.0000000139 ↗
51. C. Zener: Trans. AIME, 1946, vol. 167.
52. H.K.D.H. Bhadeshia: Philos. Mag., 2013, vol. 93, pp. 3714–25.10.1080/14786435.2013.775518 ↗
53. R.P. Reed and R.E. Schramm: J. Appl. Phys., 1969, vol. 40, pp. 3453–58.10.1063/1.1658218 ↗
54. L. Zwell, D.E. Carnahan, and G.R. Speich: Metall. Trans., 1970, vol. 1, pp. 1007–09.10.1007/BF02811785 ↗
55. J.B. McKinnon, D. Melville, and E.W. Lee: J. Phys. C: Solid State Phys., 1970, vol. 3, p. S46.10.1088/0022-3719/3/1S/306 ↗
56. N. Takahara, M. Takahashi, and R. Oshima: J. Jpn. Inst. Met., 1995, vol. 59, pp. 599–606.10.2320/jinstmet1952.59.6_599 ↗
57. L.J. Swartzendruber: Bull. Alloy Phase Diagrams, 1984, vol. 5, pp. 456–62.10.1007/BF02872896 ↗
58. L. Kaufman: Special Report No. 93, The Iron and Steel Institute, 1965, pp 48–52.
59. C.M. Wayman: Special Report No. 93, The Iron and Steel Institute, 1965, pp 153–63.10.1016/0016-0032(72)90547-9 ↗