journal article·2015-12

An In Situ Study of Sintering Behavior and Phase Transformation Kinetics in NiTi Using Neutron Diffraction

Gang Chen, Klaus-Dieter Liss, Peng Cao

Publisher page

Abstract

The powder sintering behavior of NiTi from an elemental powder mixture of Ni/Ti has been investigated, using an in situ neutron diffraction technique. In the sintered alloys, the overall porosity ranges from 9.2 to 15.6 pct, while the open-to-overall porosity ratio is between 8.3 and 63.7 pct and largely depends on the sintering temperature. In comparison to powder compacts sintered at 1223 K and 1373 K (950 °C and 1100 °C), the powder compact sintered at 1153 K (880 °C) shows a much smaller pore size, a higher open-to-overall porosity ratio but smaller shrinkage and a lower density. Direct evidence of eutectoid transformation in the binary Ni-Ti system during furnace cooling to ca. 890 K (617 °C) is provided by in situ neutron diffraction. The intensities of the B2-NiTi reflections decrease during the holding stage at 1373 K (1100 °C), which has been elaborated as an extinction effect according to the dynamical theory of neutron diffraction, when distorted crystallites gradually recover to perfect crystals. The analysis on the first five reflections clarifies the non-existence of any order–disorder transition in the NiTi phase from B2-to-BCC structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Yamauchi K, Ohkata I, Tsuchiya K, Miyazaki S. Shape memory and superelastic alloys: technologies and applications. Cambridge, U.K.: Woodhead Publishing, 2011.10.1533/9780857092625 ↗
2. Elahinia MH, Hashemi M, Tabesh M, Bhaduri SB. Progress in materials science 2012;57:911–46.10.1016/j.pmatsci.2011.11.001 ↗
3. Cluff D, Corbin SF. Intermetallics 2010;18:1480–90.10.1016/j.intermet.2010.03.043 ↗
4. Yen F-C, Hwang K-S. Metallurgical and Materials Transactions A 2012;43:687–96.10.1007/s11661-011-0894-6 ↗
5. Zhu SL, Yang XJ, Fu DH, Zhang LY, Li CY, Cui ZD. Materials Science and Engineering: A 2005;408:264–68.10.1016/j.msea.2005.08.012 ↗
6. Chen G, Cao P, Edmonds N. Materials Science and Engineering: A 2013;582:117–25.10.1016/j.msea.2013.05.082 ↗
7. Majima K, Sohama Y. Journal of the Japan Society of Powder and Powder Metallurgy 1982;29:127–32.10.2497/jjspm.29.127 ↗
8. Igharo M, Wood JV. Powder Metallurgy 1985;28:131–39.10.1179/pom.1985.28.3.131 ↗
9. Kuroki H, Nishio M, Matsumoto C. Journal of the Japan Society of Powder and Powder Metallurgy 1989;36:701–06.10.2497/jjspm.36.701 ↗
10. Panigrahi BB, Godkhindi MM. Intermetallics 2006;14:130–35.10.1016/j.intermet.2005.04.020 ↗
11. Li B-Y, Rong L-J, Li Y-Y. Materials Science and Engineering: A 2000;281:169–75.10.1016/S0921-5093(99)00729-7 ↗
12. Tang CY, Zhang LN, Wong CT, Chan KC, Yue TM. Materials Science and Engineering: A 2011;528:6006–11.10.1016/j.msea.2011.04.040 ↗
13. Whitney M, Corbin SF, Gorbet RB. Intermetallics 2009;17:894–906.10.1016/j.intermet.2009.03.018 ↗
14. Li B-Y, Rong L-J, Li Y-Y. Intermetallics 2000;8:643–46.10.1016/S0966-9795(99)00140-5 ↗
15. Chen G, Wen GA, Cao P, Edmonds N, Li YM. Powder Injection Moulding International 2012;6:83–88.
16. Chen G, Cao P. Metallurgical and Materials Transactions A 2013;44:5630–33.10.1007/s11661-013-2078-z ↗
17. Chen G, Liss K-D, Cao P. Acta Materialia 2014;67:32–4410.1016/j.actamat.2013.12.013 ↗
18. G. Chen, K.-D. Liss, and P. Cao: TMS 2014 Supplemental Proceedings. Wiley, Hoboken, 2014, p. 967–7310.1002/9781118889879.ch114 ↗
19. G. Chen: Ph.D. Thesis, Department of Chemical and Materials Engineering, The University of Auckland, New Zealand, 2014
20. Chen G, Liss K-D, Cao P. Metals 2015;5:530–46.10.3390/met5020530 ↗
21. Zhang N, Babayan Khosrovabadi P, Lindenhovius JH, Kolster BH. Materials Science and Engineering: A 1992;150:263–70.10.1016/0921-5093(92)90120-P ↗
22. Massalski TB, Okamoto H, Subramanian PR, Kacprzak L. Binary alloy phase diagrams. Materials Park, OH: ASM International, 1990.
23. Whitney M, Corbin SF, Gorbet RB. Acta Materialia 2008;56:559–70.10.1016/j.actamat.2007.10.012 ↗
24. German R, Suri P, Park S. Journal of Materials Science 2009;44:1–39.10.1007/s10853-008-3008-0 ↗
25. Honma T, Matsumoto M, Shugo Y, Nishida M. Research report of the laboratory of nuclear science. vol. 12. Berlin: Tohoku University, 1979. p.183.
26. Otsuka K, Ren X. Progress in Materials Science 2005;50:511–618.10.1016/j.pmatsci.2004.10.001 ↗
27. Zhang J, Fan G, Zhou Y, Ding X, Otsuka K, Nakamura K, Sun J, Ren X. Acta Materialia 2007;55:2897–905.10.1016/j.actamat.2006.12.028 ↗
28. K.-D. Liß: Ph.D. Thesis, RWTH Aachen, 1994
29. Kabra S, Yan K, Carr DG, Harrison RP, Dippenaar RJ, Reid M, Liss K-D. J. Appl. Phys. 2013;113:063513–1810.1063/1.4790177 ↗
30. Darwin CG. Philosophical Magazine 1914;27A:315–33.10.1080/14786440208635093 ↗
31. Darwin CG. Philosophical Magazine 1922;43:800–29.10.1080/14786442208633940 ↗
32. Blackman M. Proceedings of the Royal Society 1939;173:68–82.10.1098/rspa.1939.0129 ↗
33. Ewald P. Acta Crystallographica Section A 1969;25:103–08.10.1107/S0567739469000155 ↗
34. A. Authier: in International Tables for Crystallography Volume B: Reciprocal Space, U. Shmueli, ed., Springer, Heidelberg, 2001, vol. B, p. 534–51.
35. Studer AJ, Hagen ME, Noakes TJ. Physica B: Condensed Matter 2006;385–386, Part 2:1013–15.10.1016/j.physb.2006.05.323 ↗
36. Rietveld H. Journal of Applied Crystallography 1969;2:65–71.10.1107/S0021889869006558 ↗
37. Honjo G, Kitamura N. Acta Crystallographica 1957;10:533–34.10.1107/S0365110X57001887 ↗
38. Cooper MJ, Rouse KD. Acta Crystallographica Section A 1970;26:214–23.10.1107/S0567739470000578 ↗
39. V.F. Sears: in International Tables for Crystallography, E. Prince, ed., International Union of Crystallography, Chester, 2006. p. 444.
40. R.W. Waschowski: Landolt-Börnstein, H. Schopper, ed., Springer, Berlin, 2000.
41. Zhao X, Liu Y, Wang Y, Feng P, Tang H. Metallurgical and Materials Transactions A 2014;45A:3446–53.10.1007/s11661-014-2305-2 ↗
42. Duwez P, Taylor JL. Trans. AIME 1950;188:1173–76.
43. D.M. Poole and W. Hume-Rothery: J. Inst. Met., 1954–1955, vol. 83, p. 473–80.
44. Gupta SP, Mukherjee K, Johnson AA. Mater. Sci. Eng. 1973;11:283–97.10.1016/0025-5416(73)90093-1 ↗
45. Liss K-D, Bartels A, Schreyer A, Clemens H. Textures and Microstructures 2003;35:219–52.10.1080/07303300310001634952 ↗
46. Yan K, Carr DG, Kabra S, Reid M, Studer A, Harrison RP, Dippenaar R, Liss K-D. World Journal of Engineering 2010;7:422–23.
47. Yan K, Carr GD, Kabra S, Reid M, Studer A, Harrison RP, Dippenaar R, Liss K-D. Advanced Engineering Materials 2011;13: 882–86.10.1002/adem.201000350 ↗
48. D.B. Williams and C.B. Carter: Transmission Electron Microscopy: A Textbook for Materials Science, Springer, New York, 2009.10.1007/978-0-387-76501-3 ↗
49. Simon T, Kröger A, Somsen C, Dlouhy A, Eggeler G. Acta Materialia 2010;58:1850–60.10.1016/j.actamat.2009.11.028 ↗
50. Chumlyakov Y, Surikova NS, Korotaev AD. Physics of metals and metallography 1996;82:102–09.
51. Aydoğmuş T, Bor Ş. Metallurgical and Materials Transactions A 2012;43:5173–81.10.1007/s11661-012-1350-y ↗
52. Bastin G, Rieck G. Metallurgical and Materials Transactions B 1974;5:1827–31.10.1007/BF02644147 ↗
53. German RM. Powder Metallurgy Science. Princeton: Metal Powder Industries Federation, 1998.
54. Taupin D. Bulletin De La Societe Francaise Mineralogie Et De Cristallographie 1964;87:469–511.
55. Takagi S. Journal of the Physical Society of Japan 1969;26:1239–53.10.1143/JPSJ.26.1239 ↗
56. H. Rauch and D. Petrascheck: in Neutron Diffraction, H. Dachs, ed., Springer-Verlag, Berlin, 1978.