Reduction of Iron Ore Pellets: A Microstructural Perspective?
Source abstract
Abstract
Twenty different iron ore pellets, consisting primarily of Hematite (Fe2O3) phase, were subjected to ‘simulated’ reduction studies. A wide range of reduction time periods, Rt of 122 to 211 minutes, were obtained. Detailed microstructural characterizations were then conducted at different locations of ten selected specimens. The Rt did not relate with initial phase mix or chemistry but determined the final iron (Fe) to Wüstite (FeO1−x) ratio. In particular, numerical Rt values defined the relative presence of a bright Fe-rich rim. Further, relative density or porosity before the reduction scaled, as expected, with Rt. However, this was tenuous. The correlation appeared excellent in the post-reduction-densified specimens. This indicated the role of ‘acquired porosity’ and transformation strain. Several other microstructural parameters also scaled with Rt. These included grain size and crystallographic texture and estimated dislocation density. Lower Rt specimens had, in general, finer Fe2O3 and coarser Fe grains, but weaker crystallographic textures of Fe2O3 and FeO1−x. However, the most striking correlation appeared between Rt and post-reduction dislocation density. The acquired defect density, representing the transformation strain, appeared to be the controlling feature for the reduction of iron ore pellets.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron and Steelmaking Processes · Mineral Processing and Grinding · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. D. Raabe, C.C. Tasan, and E.A. Olivetti: Nature, 2019, vol. 575, pp. 64–74.10.1038/s41586-019-1702-5 ↗
2. A. Ghosh and A. Chatterjee: Ironmaking and Steelmaking: Theory and Practice, PHI Learning Private Limited, New Delhi, 2008.
3. X.-W. An, J. Wang, R. Lan, Y. Han, and Q. Xue: J. Iron. Steel Res. Int., 2013, vol. 20, pp. 11–16.10.1016/S1006-706X(13)60090-4 ↗
4. R. Prasad, K. Gupta, A. Poras, and S. Agarwal: Mater. Today Proc., 2020, vol. 26, pp. 2636–42.10.1016/j.matpr.2020.02.556 ↗
5. M. Geerdes, R. Chaigneau, and O. Lingiardi: Modern Blast Furnace Ironmaking: An Introduction, 4th ed. IOS Press, Amsterdam, 2020.10.3233/STAL9781643681238 ↗
6. J.J. Friel and E.S. Erickson: Metall. Trans. B, 1980, vol. 11, pp. 233–43.10.1007/BF02668407 ↗
7. T. Umadevi, P. Kumar, N.F. Lobo, M. Prabhu, P.C. Mahapatra, and M. Ranjan: ISIJ Int., 2011, vol. 51, pp. 14–20.10.2355/isijinternational.51.14 ↗
8. M. Iljana: University of Oulu, 2017.
9. L. Yi, Z. Huang, T. Jiang, R. Zhong, and Z. Liang: Powder Technol., 2017, vol. 317, pp. 89–94.10.1016/j.powtec.2017.04.056 ↗
10. O. Stelling: Jom, 1958, vol. 10, pp. 290–95.10.1007/BF03398212 ↗
11. W.H. Wetherill and C.C. Furnas: Ind. Eng. Chem., 1934, vol. 26, pp. 983–91.10.1021/ie50297a019 ↗
12. E. Kawasaki, J. Sanscrainte, and T.J. Walsh: AIChE J., 1962, vol. 8, pp. 48–52.10.1002/aic.690080114 ↗
13. M. Iljana, T. Paananen, O. Mattila, M. Kondrakov, and T. Fabritius: Metals (Basel), 2022, vol. 12, p. 302.10.3390/met12020302 ↗
14. P. Metolina, T.R. Ribeiro, and R. Guardani: Int. J. Miner. Metall. Mater., 2022, vol. 29, pp. 1908–21.10.1007/s12613-022-2487-3 ↗
15. E.T. Turkdogan and J.V. Vinters: Metall. Trans., 1972, vol. 3, pp. 1561–74.10.1007/BF02643047 ↗
16. P.C. Hayes: Metall. Trans. B, 1979, vol. 10, pp. 211–17.10.1007/BF02652465 ↗
17. A.K. Ray, K.K. Prasad, and P.K. Sen: Solid State Ion., 1992, vol. 50, pp. 217–26.10.1016/0167-2738(92)90222-B ↗
18. A.A. El-Geassy, K.A. Shehata, and S.Y. Ezz: Trans Iron Steel Inst. Jpn., 1977, vol. 17, pp. 629–35.10.2355/isijinternational1966.17.629 ↗
19. R. Hughes, E.K.T. Kam, and H. Mogadam-Zadeh: Thermochim. Acta, 1982, vol. 59, pp. 361–77.10.1016/0040-6031(82)87158-X ↗
20. T. Zhang, C. Lei, and Q. Zhu: Powder Technol., 2014, vol. 254, pp. 1–11.10.1016/j.powtec.2014.01.004 ↗
21. G. Bitsianes and T.L. Joseph: J. Met., 1955, vol. 7, pp. 639–45.
22. M.H. Bai, H. Long, S.B. Ren, D. Liu, and C.F. Zhao: ISIJ Int., 2018, vol. 58, pp. 1034–41.10.2355/isijinternational.ISIJINT-2017-739 ↗
23. D. Spreitzer and J. Schenk: Steel Res. Int., 2019, vol. 90, p. 1900108.10.1002/srin.201900108 ↗
24. F. Patisson and O. Mirgaux: Metals (Basel), 2020, vol. 10, pp. 1–15.10.3390/met10070922 ↗
25. A.D. Franklin and R.B. Campbell: J. Phys. Chem., 1955, vol. 59, pp. 65–67.10.1021/j150523a018 ↗
26. G. Bitsianes and T.L. Joseph: JOM, 1953, vol. 5, pp. 1641–47.10.1007/BF03397486 ↗
27. E.T. Turkdogan, R.G. Olsson, and J.V. Vinters: Metall. Mater. Trans. B, 1971, vol. 2, pp. 3189–96.10.1007/BF02814971 ↗
28. H.Y. Lin, Y.W. Chen, and C. Li: Thermochim. Acta, 2003, vol. 400, pp. 61–67.10.1016/S0040-6031(02)00478-1 ↗
29. A. Bonalde, A. Henriquez, and M. Manrique: ISIJ Int., 2005, vol. 45, pp. 1255–60.10.2355/isijinternational.45.1255 ↗
30. S.-H. Kim, X. Zhang, Y. Ma, I.R. Souza Filho, K. Schweinar, K. Angenendt, D. Vogel, L.T. Stephenson, A.A. El-Zoka, J.R. Mianroodi, M. Rohwerder, B. Gault, and D. Raabe: Acta Mater., 2021, vol. 212, p. 116933.10.1016/j.actamat.2021.116933 ↗
31. E.T. Turkdogan and J.V. Vinters: Can. Metall. Q., 1973, vol. 12, pp. 9–21.10.1179/cmq.1973.12.1.9 ↗
32. C.E. Seaton, J.S. Foster, and J. Velasco: Trans. Iron Steel Inst. Jpn., 1983, vol. 23, pp. 497–503.10.2355/isijinternational1966.23.497 ↗
33. S. Jursova, P. Pustejovska, and S. Brozova: Alexandria Eng. J., 2018, vol. 57, pp. 1657–64.10.1016/j.aej.2017.03.007 ↗
34. M.I. Nasr, A.A. Omar, M.H. Khedr, and A.A. El-Geassy: ISIJ Int., 1995, vol. 35, pp. 1043–49.10.2355/isijinternational.35.1043 ↗
35. A. Zare Ghadi, M.S. Valipour, S.M. Vahedi, and H.Y. Sohn: Steel Res. Int., 2020, vol. 91, p. 1900270.10.1002/srin.201900270 ↗
36. Y. Ma, I.R. Souza Filho, X. Zhang, S. Nandy, P. Barriobero-Vila, G. Requena, D. Vogel, M. Rohwerder, D. Ponge, H. Springer, and D. Raabe: Int. J. Miner. Metall. Mater., 2022, vol. 29, pp. 1901–07.10.1007/s12613-022-2440-5 ↗
37. H.K. Mehtani, M.I. Khan, A. Durgaprasad, S.K. Deb, S. Parida, M.J.N.V. Prasad, D. Fullwood, R.D. Doherty, and I. Samajdar: Acta Mater., 2020, vol. 190, pp. 43–57.10.1016/j.actamat.2020.03.019 ↗
38. H.K. Mehtani, M.I. Khan, P. Raut, S. Parida, M.J.N.V. Prasad, D. Fullwood, R.D. Doherty, and I. Samajdar: Oxid. Met., 2022, vol. 97, pp. 417–40.10.1007/s11085-022-10099-2 ↗
39. A. Dhole, A. Bhattacharya, R. de Kloe, R.K. Gupta, A.A. Gokhale, and I. Samajdar: Acta Mater., 2022, vol. 229, p. 117793.10.1016/j.actamat.2022.117793 ↗
40. J.O. Edstrom and G. Bitsianes: Jom, 1955, vol. 7, pp. 760–65.10.1007/BF03377566 ↗
41. S. Geva, M. Farren, D.H.S. John, and P.C. Hayes: Metall. Trans. B, 1990, vol. 21, pp. 743–51.10.1007/BF02654253 ↗
42. P.C. Hayes and P. Grieveson: Metall. Trans. B, 1981, vol. 12, pp. 579–87.10.1007/BF02654330 ↗
43. R.M. Cornell and U. Schwertmann: The Iron Oxides: Structure, Properties, Reactions, Occurences and Uses, vol. 114, Wiley, Weinheim, 1925.
44. C.E. Seaton, J.S. Foster, and J. Velasco: Trans. Iron Steel Inst. Jpn., 1983, vol. 23, pp. 490–96.10.2355/isijinternational1966.23.490 ↗
45. N.G. Gallegos and M.A. Apecetche: J. Mater. Sci., 1988, vol. 23, pp. 451–58.10.1007/BF01174669 ↗
46. A. Pineau, N. Kanari, and I. Gaballah: Thermochim. Acta, 2006, vol. 447, pp. 89–100.10.1016/j.tca.2005.10.004 ↗
47. W.K. Jozwiak, E. Kaczmarek, T.P. Maniecki, W. Ignaczak, and W. Maniukiewicz: Appl. Catal. A Gen., 2007, vol. 326, pp. 17–27.10.1016/j.apcata.2007.03.021 ↗
48. A. Pineau, N. Kanari, and I. Gaballah: Thermochim. Acta, 2007, vol. 456, pp. 75–88.10.1016/j.tca.2007.01.014 ↗
49. B. Hou, H. Zhang, H. Li, and Q. Zhu: Chin. J. Chem. Eng., 2012, vol. 20, pp. 10–17.10.1016/S1004-9541(12)60357-7 ↗
50. L.E. Lagoeiro: J. Metamorph. Geol., 1998, vol. 16, pp. 415–23.10.1111/j.1525-1314.1998.00144.x ↗
51. Y. Ma, I.R. Souza Filho, Y. Bai, J. Schenk, F. Patisson, A. Beck, J.A. van Bokhoven, M.G. Willinger, K. Li, D. Xie, D. Ponge, S. Zaefferer, B. Gault, J.R. Mianroodi, and D. Raabe: Scr. Mater., 2022, vol. 213, p. 114571.10.1016/j.scriptamat.2022.114571 ↗
52. G. Nabi: McMaster University, 1970.
53. D. Wagner, O. Devisme, F. Patisson, and D. Ablitzer: Sohn Int. Symp., 2006, vol. 2, pp. 111–20.
54. Y. Qu, L. Xing, L. Shao, Y. Luo, and Z. Zou: Powder Technol., 2019, vol. 355, pp. 26–36.10.1016/j.powtec.2019.06.048 ↗
55. J.G. Peacey and W.G. Davenport: Elsevier, 2016.
56. A. Spanlang, W. Wukovits, and B. Weiss: Chem. Eng. Trans., 2016, vol. 52, pp. 973–78.
57. D.M. Kundrat, T. Miwa, and A. Rist: Metall. Trans. B, 1991, vol. 22, pp. 363–83.10.1007/BF02651235 ↗
58. R. Chaigneau: University of Delft, 1994.
59. S. Gražulis, D. Chateigner, R.T. Downs, A.F.T. Yokochi, M. Quirós, L. Lutterotti, E. Manakova, J. Butkus, P. Moeck, and A. Le Bail: J. Appl. Crystallogr., 2009, vol. 42, pp. 726–29.10.1107/S0021889809016690 ↗
60. H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
61. L.B. McCusker, R.B. Von Dreele, D.E. Cox, D. Louër, and P. Scardi: J. Appl. Crystallogr., 1999, vol. 32, pp. 36–50.10.1107/S0021889898009856 ↗
62. R.J. Hill and I.C. Madsen: J. Appl. Crystallogr., 1986, vol. 19, pp. 10–18.10.1107/S0021889886090076 ↗
63. B.H. Toby: Powder Diffr., 2006, vol. 21, pp. 67–70.10.1154/1.2179804 ↗
64. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley, Reading, 1956.
65. K.V. Mani Krishna, R. Raghavan, D. Srivastava, G.K. Dey, S.K. Sahoo, and I. Samjadar: Trans. Indian Inst. Met., 2011, vol. 64, pp. 309–13.10.1007/s12666-011-0063-z ↗
66. S.I. Wright, M.M. Nowell, R. de Kloe, P. Camus, and T. Rampton: Ultramicroscopy, 2015, vol. 148, pp. 132–45.10.1016/j.ultramic.2014.10.002 ↗
67. S. Kumar, A. Sarkar, A.D. Prasad, M. Paliwal, S. Mukherjee, and S. Mandal: Mater. Sci. Eng. A, 2022, vol. 835, p. 142664.10.1016/j.msea.2022.142664 ↗
68. T.N. Tak, A. Prakash, A. Lodh, S.M. Keralavarma, S.V.S. Narayana Murty, I. Samajdar, and P.J. Guruprasad: J. Eng. Mater. Technol. Trans. ASME, 2020, vol. 142, pp. 1–8.10.1115/1.4047498 ↗
69. A. Lodh, K. Thool, and I. Samajdar: Trans. Indian Inst. Met., 2022, vol. 75, pp. 983–95.10.1007/s12666-022-02540-6 ↗
70. T. Simmonds and P.C. Hayes: Metall. Mater. Trans. E, 2017, vol. 4, pp. 114–22.
71. T. Kang, S. Gupta, and V. Sahajwalla: ISIJ Int., 2007, vol. 47, pp. 1590–98.10.2355/isijinternational.47.1590 ↗
72. T. Kang: The University of New South Wales, Sydney, 2000.
73. J. Pal, S. Ghoari, Ammasi, S.K. Hota, V.M. Koranne, and T. Venugopalan: Geotechnical Correlations for Soils and Rocks, Wiley, Hoboken, 2018, pp. 1–9.
74. E.T. Turkdogan and J. Vinters: Metall. Trans., 1971, vol. 2, pp. 3175–88.10.1007/BF02814970 ↗
75. H.-J. Bunge: Texture Analysis in Materials Science Mathematical Methods, Butterworth-Heinemann, Technische Universität Clausthal, 1969.
76. H.K. Mehtani, M.I. Khan, B.N. Jaya, S. Parida, M.J.N.V. Prasad, and I. Samajdar: J. Alloys Compd., 2021, vol. 871, p. 159583.10.1016/j.jallcom.2021.159583 ↗
77. A. Sarkar, S. Sanyal, T.K. Bandyopadhyay, and S. Mandal: Mater. Sci. Eng. A, 2019, vol. 767, p. 138402.10.1016/j.msea.2019.138402 ↗
78. O. Engler and V. Randle: Introduction to Texture Analysis, CRC Press, Boca Raton, 2009.10.1201/9781420063660 ↗
79. T.J. Ruggles and D.T. Fullwood: Ultramicroscopy, 2013, vol. 133, pp. 8–15.10.1016/j.ultramic.2013.04.011 ↗
80. S.R. Kondavalasa, A. Prakash, R. Jagtap, S. Shanmugam, I. Samajdar, V.K. Vasudevan, and G. Wilde: Mater Charact, 2019, vol. 153, pp. 328–38.10.1016/j.matchar.2019.05.021 ↗
81. A. Chatterjee: Beyond the Blast Furnace, CRC Press, Boca Raton, 2017.10.1201/9781315138220 ↗
82. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, Elsevier, Amsterdam, 2007.
83. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5317–31.10.1007/s11661-017-4280-x ↗
84. A.J. Wilkinson, G. Meaden, and D.J. Dingley: Ultramicroscopy, 2006, vol. 106, pp. 307–13.10.1016/j.ultramic.2005.10.001 ↗
85. M. Ettabirou, B. Dupré, and C. Gleitzer: Steel Res., 1986, vol. 57, pp. 306–11.10.1002/srin.198600769 ↗
86. S.P. Matthew, T.R. Cho, and P.C. Hayes: Metall. Trans. B, 1990, vol. 21, pp. 733–41.10.1007/BF02654252 ↗
87. S. El Moujahid and A. Rist: Metall. Trans. B, 1988, vol. 19, pp. 787–802.10.1007/BF02650198 ↗