journal article·2023-12

Improving the Mechanical Properties of an Age-Hardenable Magnesium Alloy via Regulating Precipitate Scale and Building Dislocation Configuration

Tao Chen, Sijia Hu, Shiqi Li, Liuwei Zheng, Lifei Wang, Yingzhi Wang, Qinghuan Huo

Publisher page

Abstract

To overcome the trade-off between strength and ductility, a low-cost method comprising room-temperature compression followed by artificial aging and compressive deformation was applied to a commercial AZ61 alloy. The goal of this work was to regulate the microstructure rather than refine the grains. For this purpose, fragmented precipitates decorating the boundaries of narrow twins and stable networks developed by two non-basal slip systems were achieved. With this novel microstructure, a highly improved yield strength of almost 120 MPa was realized with slightly decreased ductility. It is believed that this provides a novel orientation for rationally designing strength and ductility in age-hardenable Mg alloys by tailoring the precipitate scale and dislocation configuration. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. H. Ovri, J. Markmann, J. Barthel, M. Kruth, H. Dieringa, and E.T. Lilleodden: Acta Mater., 2023, vol. 244, p. 118550.10.1016/j.actamat.2022.118550 ↗
2. Z. Zhang, Q. Huo, Z. Xiao, A. Hashimoto, and X. Yang: Mater. Sci. Eng. A, 2020, vol. 772, p. 138816.10.1016/j.msea.2019.138816 ↗
3. J.U. Lee, S. Kim, Y.J. Kim, and S.H. Park: Mater. Sci. Eng. A, 2018, vol. 714, pp. 49–58.10.1016/j.msea.2017.12.061 ↗
4. X.F. Niu, G. Li, Z.Y. Zhang, P.W. Zhou, H.X. Wang, S.X. Zhang, and W.L. Cheng: Mater. Sci. Eng. A, 2019, vol. 743, pp. 207–16.10.1016/j.msea.2018.11.023 ↗
5. Z. Zhang, Q. Huo, Z. Xiao, Y. Zhang, A. Hashimoto, and X. Yang: Mater. Sci. Eng. A, 2021, vol. 812, p. 141102.10.1016/j.msea.2021.141102 ↗
6. S. Hu, Q. Huo, C. Wang, Y. Zhang, Z. Zhang, S. Xu, and X. Yang: J. Alloys Compd., 2022, vol. 895, p. 162666.10.1016/j.jallcom.2021.162666 ↗
7. C. Chen, D.S. Han, M.C. Wang, S. Xu, T. Cai, S. Yang, F.J. Shi, B. Beausir, and L.S. Toth: J. Alloys Compd., 2023, vol. 931, p. 167498.10.1016/j.jallcom.2022.167498 ↗
8. C.J. Yan, Y.C. Xin, X.B. Chen, D.K. Xu, P.K. Chu, C.Q. Liu, B. Guan, X.X. Huang, and Q. Liu: Nat. Commun., 2021, vol. 12, p. 4616.10.1038/s41467-021-24939-3 ↗
9. Y.H. Li, Y.Q. Jiang, Q. Xu, A.B. Ma, J.H. Jiang, H. Liu, Y.C. Yuan, and C. Qiu: Mater. Sci. Eng. A, 2021, vol. 804, p. 140717.10.1016/j.msea.2020.140717 ↗
10. L. Luo, Z.Y. Xiao, Q.H. Huo, Y. Yang, W.Y. Huang, J.C. Guo, Y.X. Ye, and X.Y. Yang: J. Alloys Compd., 2018, vol. 740, pp. 180–93.10.1016/j.jallcom.2017.12.296 ↗
11. F.Y. Liu, R.L. Xin, C.P. Wang, B. Song, and Q. Liu: Scr. Mater., 2019, vol. 158, pp. 131–35.10.1016/j.scriptamat.2018.08.049 ↗
12. Y.S. Liu, J.W. Yan, D.Y. Xie, Y. Shen, J. Wang, and G.Z. Zhu: Scr. Mater., 2021, vol. 191, pp. 86–89.10.1016/j.scriptamat.2020.09.014 ↗
13. J. Li, J.L. Wu, L. Jin, M. Celikin, F.H. Wang, S. Dong, and J. Dong: Sci. Rep., 2021, vol. 11, p. 2860.10.1038/s41598-021-82517-5 ↗
14. A.H. Blake and C.H. Cáceres: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 161–63.10.1016/j.msea.2006.10.205 ↗
15. D.X. Zhao, X.L. Ma, A. Srivastava, G. Turner, I. Karaman, and K.Y. Xie: Acta Mater., 2021, vol. 207, p. 116691.10.1016/j.actamat.2021.116691 ↗
16. S. Si, J. Wu, I.P. Jones, and Y.L. Chiu: Philos. Mag., 2020, vol. 100, pp. 2949–71.10.1080/14786435.2020.1802077 ↗
17. Q. Huo, Z. Xiao, X. Yang, D. Ando, Y. Sutou, and J. Koike: Mater. Sci. Eng. A, 2017, vol. 696, pp. 52–59.10.1016/j.msea.2017.04.061 ↗
18. J.F. Nie: Scr. Mater., 2003, vol. 48, pp. 1009–015.10.1016/S1359-6462(02)00497-9 ↗
19. N. Tahreen, D.L. Chen, M. Nouri, and D.Y. Li: J. Alloys Compd., 2015, vol. 623, pp. 15–23.10.1016/j.jallcom.2014.10.096 ↗
20. J. Jain, W.J. Poole, C.W. Sinclair, and M.A. Gharghouri: Scr. Mater., 2010, vol. 62, pp. 301–04.10.1016/j.scriptamat.2009.11.024 ↗
21. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, p. 401.
22. A.H. Cottrell and B.A. Bilby: Philos. Mag., 1951, vol. 42, p. 573.10.1080/14786445108561272 ↗
23. M.A. Gharghouri, G.C. Weatherly, and J.D. Embury: Philos. Mag. A, 1998, vol. 78, pp. 1137–149.10.1080/01418619808239980 ↗
24. T. Chen, S. Hu, S. Li, and Q. Huo: Mater. Sci. Eng. A, 2022, vol. 857, p. 144056.10.1016/j.msea.2022.144056 ↗
25. S. Kim, J.U. Lee, Y.J. Kim, J.H. Bae, B.S. You, and S.H. Park: J. Mater. Sci. Technol., 2018, vol. 34, pp. 265–76.10.1016/j.jmst.2017.11.019 ↗
26. N. Li, C. Wang, M.A. Monclús, L. Yang, and J.M. Molina-Aldareguia: Acta Mater., 2021, vol. 221, p. 117374.10.1016/j.actamat.2021.117374 ↗
27. Z. Yan, Q. Yang, F. Meng, R. Ma, R. Bao, X. Liu, J. Meng, and X. Qiu: J. Mater. Sci. Technol., 2021, vol. 93, pp. 103–09.10.1016/j.jmst.2021.03.054 ↗
28. K. Yaddanapudi, B. Leu, M.A. Kumar, X. Wang, J.M. Schoenung, E.J. Lavernia, T.J. Rupert, I.J. Beyerlein, and S. Mahajan: Acta Mater., 2021, vol. 204, p. 116514.10.1016/j.actamat.2020.116514 ↗
29. S.R. Kada, P.A. Lynch, J.A. Kimpton, and M.R. Barnett: Acta Mater., 2016, vol. 119, pp. 145–56.10.1016/j.actamat.2016.08.022 ↗
30. Y. Zhang, T. Chen, J. Kuang, and Q. Huo: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 747–53.10.1007/s11661-021-06578-x ↗
31. X. Wang, M. Jahazi, and S. Yue: Mater. Sci. Eng. A, 2006, vol. 434, pp. 188–93.10.1016/j.msea.2006.06.119 ↗
32. G.Z. Kang, Y.W. Dong, Y.J. Liu, and H. Jiang: Mater. Charact., 2014, vol. 92, pp. 26–35.10.1016/j.matchar.2014.02.014 ↗
33. P.O. Tympel, T.C. Lindley, E.A. Saunders, M. Dixon, and D. Dye: Acta Mater., 2016, vol. 103, pp. 77–88.10.1016/j.actamat.2015.09.014 ↗
34. J.S. Jha, S. Dhala, S.P. Toppo, R. Singh, A. Tewari, S.K. Mishra, and B. Jayabalan: Mater. Charact., 2019, vol. 155, p. 109829.10.1016/j.matchar.2019.109829 ↗
35. A. Jain, O. Duygulu, D.W. Brown, C.N. Tomé, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
36. M. Sabbaghian, R. Mahmudi, and K.S. Shin: Mater. Sci. Eng. A, 2022, vol. 845, p. 143218.10.1016/j.msea.2022.143218 ↗
37. U.M. Chaudry, Y. Noh, G. Han, R. Jaafreh, T. Jun, and K. Hamad: Mater. Sci. Eng. A, 2022, vol. 844, p. 143189.10.1016/j.msea.2022.143189 ↗
38. T. Nakata, C. Xu, L. Geng, and S. Kamado: J. Alloys Compd., 2022, vol. 928, p. 167154.10.1016/j.jallcom.2022.167154 ↗
39. J.Q. Li, J. Liu, and Z.S. Cui: Mater. Sci. Eng. A, 2015, vol. 643, pp. 32–36.10.1016/j.msea.2015.07.028 ↗
40. M.G. Jiang, H. Yan, and R.S. Chen: Mater. Des., 2015, vol. 87, pp. 891–900.10.1016/j.matdes.2015.08.052 ↗
41. M. Avvari and S. Narendranath: J. Magnes. Alloys, 2014, vol. 2, pp. 159–64.10.1016/j.jma.2014.04.002 ↗
42. X.H. Huang, M.Z. Bian, and Y. Chino: Scr. Mater., 2022, vol. 215, p. 114709.10.1016/j.scriptamat.2022.114709 ↗
43. S. Kleiner and P.J. Uggowitzer: Mater. Sci. Eng. A, 2004, vol. 379, pp. 258–63.10.1016/j.msea.2004.02.020 ↗
44. S. Huang, M. Subramani, K. Borodianskiy, P.N. Immanuel, and C. Chiang: Mater. Today Commun., 2023, vol. 34, p. 104974.10.1016/j.mtcomm.2022.104974 ↗
45. Z.J. Zhang, L. Yuan, D.B. Shan, and B. Guo: Mater. Sci. Eng. A, 2021, vol. 827, p. 142036.10.1016/j.msea.2021.142036 ↗
46. H.J. Kim, Y.J. Kim, and S.H. Park: J. Magnes. Alloys, 2023, vol. 11, pp. 671–83.10.1016/j.jma.2021.09.008 ↗
47. X.S. Huang, K. Suzuki, and N. Saito: Mater. Sci. Eng. A., 2009, vol. 508, pp. 226–33.10.1016/j.msea.2008.12.052 ↗
48. L.L. Tang, Y.H. Zhao, R.K. Islamgaliev, C.Y.A. Tsao, R.Z. Valiev, E.J. Lavernia, and Y.T. Zhu: Mater. Sci. Eng. A, 2016, vol. 670, pp. 280–91.10.1016/j.msea.2016.06.031 ↗
49. Y. Cubides, A.I. Karayan, M.W. Vaughan, I. Karaman, and H. Castaneda: Materialia, 2020, vol. 13, p. 100840.10.1016/j.mtla.2020.100840 ↗
50. G. Faraji, P. Yavari, S. Aghdamifar, and M.M. Mashhadi: J. Mater. Sci. Technol., 2014, vol. 30, pp. 134–38.10.1016/j.jmst.2013.08.010 ↗
51. L. Chen, W. Li, Y. Sun, and M. Luo: J. Alloys Compd., 2022, vol. 923, p. 166495.10.1016/j.jallcom.2022.166495 ↗
52. L. Zheng, X. Zhang, H. Wang, L. Wang, H. Hou, H. Li, and S.S. Kwang: J. Mater. Res. Technol., 2021, vol. 15, pp. 2459–70.10.1016/j.jmrt.2021.09.058 ↗
53. X. Xia, Q. Chen, Z. Zhao, M. Ma, X. Li, and K. Zhang: J. Alloys Compd., 2015, vol. 623, pp. 62–68.10.1016/j.jallcom.2014.10.084 ↗
54. B. Li, B. Teng, and G. Chen: Mater. Sci. Eng. A, 2019, vol. 744, pp. 396–405.10.1016/j.msea.2018.12.024 ↗