journal article·2023-09

Cu/Al Dissimilar Cold Spot Forge Welding: Effects of Bonding Temperature and Reduction Ratio on Joint Strength and Reaction Layer Growth

Hideki Yamagishi

Publisher page

Abstract

High-strength, high-throughput, direct metallurgical joining of copper/aluminum (Cu/Al) is in high demand for electrodes and other electronic functional components; however, the easy formation and growth of intermetallic compounds (IMCs) at the bonded interface (BI) makes this approach difficult. In this study, the feasibility of dissimilar overlap bonding of pure Cu C1020 and Al alloy A1050, each with 1-mm thickness and 8-mm bonding diameter in a bus-bar shape, was investigated using the recently developed cold spot forge-welding (CSFW) method. This technique, which can simultaneously join and apply instantaneous pressure at low temperatures, is virtually IMC free. Here, the effects of joint temperature and reduction ratio R on the tensile shear load F of the joint, as well as the formation of the reaction layer (RL) at the joint interface, were systematically studied. Six bonding temperatures were used, ranging from room temperature (RT) to 608 K (335 °C). The tensile shear load generally increased with increasing R and bonding temperature, and its failure mode tended to shift from BI fracture to Al base-metal fracture; however, this F–R characteristic exhibited on/off behavior related to the mechanical snagging effect of the Cu material on the Al material. The behavior of the tensile load curve was broadly classified into four types; when the joint strength was corrected by the first peak load, the effect of bonding temperature (i.e., the metallurgical joining effect related to diffusion reaction) became apparent. RL growth was strongly affected by bonding temperature, which is the diffusion driving force, and R, which affects reaction efficiency. Joint strength and RL growth behavior revealed the optimal joining conditions. The RL mainly consisted of two phases of IMC, which were identified as Al2Cu (θ) and Al4Cu9 (γ) via transmission electron microscopy. The fatigue property of the optimal conditions was also explored to confirm the practical strength. Systematic examinations of the joint strength and interface for the dominant control parameters in CSFW (i.e., bonding temperature and R) demonstrated that the method is fully applicable to Cu/Al electrical functional components and is not restricted to the bus-bar form.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. X. Fei, Y. Ye, L. Jin, H. Wang, and S. Lv: J. Mater. Process. Tech., 2018, vol. 256, pp. 160–71.10.1016/j.jmatprotec.2018.02.004 ↗
2. P.K. Sahu, S. Pal, and S.K. Pal: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 3300–17.10.1007/s11661-017-4093-y ↗
3. P. Xue, B.L. Xiao, and Z.Y. Ma: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3091–103.10.1007/s11661-015-2909-1 ↗
4. R. Beygi, M. Kazeminezhad, A.H. Kokabi, and A. Loureiro: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2544–53.10.1007/s11661-015-2859-7 ↗
5. R. Beygi, M. Kazeminezhad, A.H. Kokabi, and A. Loureiro: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 361–70.10.1007/s11661-013-1989-z ↗
6. C.W. Tan, Z.G. Jiang, L.Q. Li, Y.B. Chen, and X.Y. Chen: Meter. Des., 2013, vol. 51, pp. 466–73.
7. C. Genevois, M. Girad, B. Huneau, X. Sauvage, and G. Racineux: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2290–95.10.1007/s11661-011-0660-9 ↗
8. J. Liu and B. Cao: J. Mater. Process. Tech., 2021, vol. 297, p. 117239.10.1016/j.jmatprotec.2021.117239 ↗
9. J. Liu and B. Cao: J. Manu. Process., 2019, vol. 46, pp. 194–203.10.1016/j.jmapro.2019.07.018 ↗
10. G. Zhang, Y. Takahashi, Z. Heng, K. Takashima, and K. Misawa: Metall. Mater. Trans. A, 2015, vol. 56, pp. 1842–51.
11. S. Morozumi and M. Kikuchi: J. Jpn. Inst. Light Met., 1982, vol. 32, pp. 195–201.10.2464/jilm.32.195 ↗
12. H. Liu, H. Jin, M. Shao, H. Tang, and X. Wang: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1273–82.10.1007/s11661-018-5074-5 ↗
13. H. Paul and L.L. Dobrzyn’ska: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3836–51.10.1007/s11661-013-1703-1 ↗
14. H. Yu, L. Zhang, S. Li, F. Cai, Y. Li, Y. Shi, S. Zhong, J. Ma, Y. Jiu, W. Long, H. Dong, and S. Wei: Nanotechnol. Rev., 2021, vol. 10, pp. 1318–28.10.1515/ntrev-2021-0081 ↗
15. H. Yamagishi, Pat./Jan./7114029.
16. H. Yamagishi, Pat./Jan./PCT/JP2021/003018.
17. H. Yamagishi, J. Sumioka, S. Kakiuchi, S. Tomida, K. Takeda, and K. Shimazaki: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3601–11.10.1007/s11661-015-2956-7 ↗
18. H. Yamagishi, S. Kakiuchi, and M. Sato: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4659–68.10.1007/s11661-018-4772-3 ↗
19. H. Yamagishi, M. Sato, and K. Kakiuchi: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2154–62.10.1007/s11661-020-05682-8 ↗
20. H. Yamagishi: Mater. Lett., 2020, vol. 278, p. 128412.10.1016/j.matlet.2020.128412 ↗
21. H. Yamagishi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 741–52.10.1007/s11661-020-06118-z ↗
22. H. Yamagishi: Mater. Trans., 2021, vol. 62, pp. 1576–82.10.2320/matertrans.MT-M2021080 ↗
23. H. Yamagishi: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 4064–80.10.1007/s11661-022-06816-w ↗
24. H. Yamagishi: Mater. Lett., 2021, vol. 279, p. 130080.10.1016/j.matlet.2021.130080 ↗
25. H. Yamagishi: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 264–76.10.1007/s11661-021-06518-9 ↗
26. H. Yamagishi: Alutopia, 2022, vol. 52, pp. 14–21.
27. Welding Handbook Committee, Other Welding Processes: in Welding handbook vol. 2, 8th ed., R.L O'Brien, eds., American Welding Society, Florida,1991, pp. 917–18.
28. https://www.jfe-steel.co.jp/products/koukan/img/pdf/seizoukoutei_03.pdf/. Accessed 25 Jan 2023
29. J.R. Davis: Aluminum and Aluminum Alloys, ASM International, Ohio, 1994, pp. 76–77.
30. M. Minakawa: Hitachi Rev., 1967, vol. 49, pp. 62–65.
31. K. Shibata, S. Morozumi, and N. Kouda: J. Jpn. Inst. Met. Mater., 1966, vol. 30, pp. 382–88.10.2320/jinstmet1952.30.4_382 ↗
32. H. Oikawa, T. Obara, and S. Karashima: Metall. Trans., 1970, vol. 1, pp. 2969–70.10.1007/BF03037845 ↗
33. H.T.G. Hentzell and K.N. Tu: J. Appl. Phys., 1983, vol. 54, pp. 6929–27.10.1063/1.332000 ↗